[PATCH v4 7/7] ARM: dts: meson8b: switch to new bindings for UART nodes

[Neil Armstrong]

Switch to the stable UART bindings by adding a XTAL node and using the
proper compatible strings.

Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
 arch/arm/boot/dts/meson8b.dtsi | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index d9f116a..651ad4a 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -82,6 +82,13 @@
                        reg = <0x203>;
                };
        };
+
+       xtal: xtal-clk {
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "xtal";
+               #clock-cells = <0>;
+       };
 }; /* end of / */
 
 &aobus {
@@ -178,17 +185,25 @@
 };
 
 &uart_AO {
-       clocks = <&clkc CLKID_CLK81>;
+       compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+       clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+       clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-       clocks = <&clkc CLKID_CLK81>;
+       compatible = "amlogic,meson8b-uart";
+       clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+       clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-       clocks = <&clkc CLKID_CLK81>;
+       compatible = "amlogic,meson8b-uart";
+       clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+       clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-       clocks = <&clkc CLKID_CLK81>;
+       compatible = "amlogic,meson8b-uart";
+       clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+       clock-names = "xtal", "pclk", "baud";
 };
-- 
1.9.1