[PATCH 3/5] ARM: sun50i: orangepi-pc2: Enable dwmac-sun8i

[Corentin Labbe]

The dwmac-sun8i hardware is present on the Orange PI PC2.
It uses an external PHY rtl8211e via RGMII.

This patch create the needed regulator, emac and phy nodes.
Signed-off-by: Corentin Labbe <clabbe.montj...@gmail.com>
---
 .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts  | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index dfecc17dcc92..a8296feee884 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -59,6 +59,7 @@
        };
 
        aliases {
+               ethernet0 = &emac;
                serial0 = &uart0;
        };
 
@@ -91,6 +92,16 @@
                };
        };
 
+       reg_gmac_3v3: gmac-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "gmac-3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <100000>;
+               enable-active-high;
+               gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+       };
+
        reg_usb0_vbus: usb0-vbus {
                compatible = "regulator-fixed";
                regulator-name = "usb0-vbus";
@@ -126,12 +137,28 @@
        status = "okay";
 };
 
+&emac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_rgmii_pins>;
+       phy-supply = <&reg_gmac_3v3>;
+       phy-handle = <&ext_rgmii_phy>;
+       phy-mode = "rgmii";
+       status = "okay";
+};
+
 &ir {
        pinctrl-names = "default";
        pinctrl-0 = <&ir_pins_a>;
        status = "okay";
 };
 
+&mdio {
+       ext_rgmii_phy: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
 &mmc0 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-- 
2.13.0