The blink counter A was always selected because 0 was forced in the
blink select counter register.
The variable 'set' was obviously there to be used as the register value,
selecting the B counter when id==1 and A counter when id==0.
Tested on clearfog-pro (Marvell 88F6828)
Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Reviewed-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>
Reviewed-by: Ralph Sennhauser <ralph.sennhau...@gmail.com>
Signed-off-by: Richard Genoud <richard.gen...@gmail.com>
---
drivers/gpio/gpio-mvebu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 19a92efabbef..cdef2c78cb3b 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -747,7 +747,7 @@ static int mvebu_pwm_probe(struct platform_device *pdev,
set = U32_MAX;
else
return -EINVAL;
- writel_relaxed(0, mvebu_gpioreg_blink_counter_select(mvchip));
+ writel_relaxed(set, mvebu_gpioreg_blink_counter_select(mvchip));
mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), GFP_KERNEL);
if (!mvpwm)
