On Wed, May 31, 2017 at 08:14:52AM +0200, Oleksij Rempel wrote: > Signed-off-by: Oleksij Rempel <o.rem...@pengutronix.de> > Cc: ker...@pengutronix.de > Cc: linux-arm-ker...@lists.infradead.org > Cc: Michael Turquette <mturque...@baylibre.com> > Cc: Stephen Boyd <sb...@codeaurora.org> > Cc: Rob Herring <robh...@kernel.org> > Cc: Mark Rutland <mark.rutl...@arm.com> > Cc: linux-...@vger.kernel.org > Cc: devicet...@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > --- > Documentation/devicetree/bindings/clock/imx6q-clock.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt > b/Documentation/devicetree/bindings/clock/imx6q-clock.txt > index 9252912a5b0e..214cb5f461c7 100644 > --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt > +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt > @@ -6,6 +6,10 @@ Required properties: > - interrupts: Should contain CCM interrupt > - #clock-cells: Should be <1> > > +Optional properties: > +- fsl,pmic_stby_poweroff: Configure CCM to assert PMIC_STBY_REQ signal > + on power off.
s/_/-/ in property names, please. When/why is this needed? Why should a DT author (not) set this? Thanks, Mark. > + > The clock consumer should specify the desired clock by having the clock > ID in its "clocks" phandle cell. See > include/dt-bindings/clock/imx6qdl-clock.h > for the full list of i.MX6 Quad and DualLite clock IDs. > -- > 2.11.0 >
