Petr Vandrovec wrote:
>
> On Sat, Nov 18, 2000 at 10:43:20PM -0500, John Cavan wrote:
> > Bus 1, device 0, function 0:
> > VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 5).
> > IRQ 16.
> > Master Capable. Latency=64. Min Gnt=16.Max Lat=32.
> > Prefetchable 32 bit memory at 0xf6000000 [0xf7ffffff].
> > Non-prefetchable 32 bit memory at 0xfeafc000 [0xfeafffff].
> > Non-prefetchable 32 bit memory at 0xfe000000 [0xfe7fffff].
> >
> > But agpgart sets up:
> >
> > agpgart: Maximum main memory to use for agp memory: 440M
> > agpgart: Detected Intel 440BX chipset
> > agpgart: AGP aperture is 32M @ 0xfa000000
>
> AGP aperture is feature of host bridge:
>
> 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
> Flags: bus master, medium devsel, latency 32
> Memory at d0000000 (32-bit, prefetchable) [size=64M]
> ^^^^^^^^ ^^^^^^^^^^
> Capabilities: [a0] AGP version 1.0
>
> 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01)
>(prog-if 00 [VGA])
> Subsystem: Matrox Graphics, Inc. Millennium G200 AGP
> Flags: bus master, medium devsel, latency 32, IRQ 11
> Memory at d8000000 (32-bit, prefetchable) [size=16M]
> Memory at d4000000 (32-bit, non-prefetchable) [size=16K]
> Memory at d5000000 (32-bit, non-prefetchable) [size=8M]
> Expansion ROM at <unassigned> [disabled] [size=64K]
> Capabilities: [dc] Power Management version 1
> Capabilities: [f0] AGP version 1.0
>
> So it matters what you have listed in 00:00.0 node, not on Matrox device.
Ah, now it makes sense. Interestingly, yours show that the bridge
address is lower than the card address, mine is reversed.
> > Needless to say, the two disagree and direct rendering is disabled.
> > Attached is my .config for 2.4.0-test11-pre7. I've been wading through
> > the code for AGP and DRM support, but nothing jumps out at me.
>
> > (http://www.matrox.com/mga/support/drivers/latest/home.htm)
>
> As matrox driver contains large BLOB which does all important things
> (dualhead) usual practices about binary only software applies.
Unfortunately, dual head is what I want from it. I can get dual head,
but not accelerated 3D on the primary display. The stock XFree86 driver
just chokes even trying dual head. Oh well. I guess I'll be waiting for
Matrox to sort themselves out or for the XFree86 guys to get it.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
