Maxim Semiconductor MAX17211/MAX17215 single/multi-cell fuel gauge
monitor with M5 Fuel Gauge algorithm

Slave device provide software layer for access to internal registers
MAX17211/MAX17215 chip.
---
 drivers/w1/slaves/Kconfig       |  12 ++++
 drivers/w1/slaves/Makefile      |   1 +
 drivers/w1/slaves/w1_max1721x.c | 121 ++++++++++++++++++++++++++++++++++++++++
 drivers/w1/slaves/w1_max1721x.h | 101 +++++++++++++++++++++++++++++++++
 drivers/w1/w1_family.h          |   1 +
 5 files changed, 236 insertions(+)
 create mode 100644 drivers/w1/slaves/w1_max1721x.c
 create mode 100644 drivers/w1/slaves/w1_max1721x.h

diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index cfe74d0..05467da 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -78,6 +78,18 @@ config W1_SLAVE_DS2433_CRC
          Each block has 30 bytes of data and a two byte CRC16.
          Full block writes are only allowed if the CRC is valid.
 
+config W1_SLAVE_MAX1721X
+       tristate "Maxim MAX17211/MAX17215 battery monitor chip"
+       help
+         If you enable this you will have the MAX17211/MAX17215 battery
+         monitor chip support.
+
+         The battery monitor chip is used in many batteries/devices
+         as the one who is responsible for charging/discharging/monitoring
+         Li+ batteries.
+
+         If you are unsure, say N.
+
 config W1_SLAVE_DS2760
        tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
        help
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 1e9989a..1e9f942 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_W1_SLAVE_DS2406) += w1_ds2406.o
 obj-$(CONFIG_W1_SLAVE_DS2423)  += w1_ds2423.o
 obj-$(CONFIG_W1_SLAVE_DS2431)  += w1_ds2431.o
 obj-$(CONFIG_W1_SLAVE_DS2433)  += w1_ds2433.o
+obj-$(CONFIG_W1_SLAVE_MAX1721X)        += w1_max1721x.o
 obj-$(CONFIG_W1_SLAVE_DS2760)  += w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)  += w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)  += w1_ds2781.o
diff --git a/drivers/w1/slaves/w1_max1721x.c b/drivers/w1/slaves/w1_max1721x.c
new file mode 100644
index 0000000..bb73e90
--- /dev/null
+++ b/drivers/w1/slaves/w1_max1721x.c
@@ -0,0 +1,121 @@
+/*
+ * 1-Wire implementation for the max17211 chip
+ *
+ * Copyright © 2017, Alex A. Mihaylov <minimum...@rambler.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/idr.h>
+#include <linux/gfp.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+#include "w1_max1721x.h"
+
+int w1_max1721x_reg_get(struct device *dev, uint16_t addr, uint16_t *val)
+{
+       struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+       int ret = -ENODEV;
+
+       if (addr > MAX1721X_MAX_REG_NR || addr < 0 || !val || !dev)
+               return -EFAULT;
+
+       mutex_lock(&sl->master->bus_mutex);
+
+       if (!w1_reset_select_slave(sl)) {
+               w1_write_8(sl->master, W1_MAX1721X_READ_DATA);
+               w1_write_8(sl->master, addr & 0x00FF);
+               w1_write_8(sl->master, addr>>8 & 0x00FF);
+               *val = w1_read_8(sl->master);
+               *val |= w1_read_8(sl->master)<<8;
+               ret = 0;
+       }
+
+       mutex_unlock(&sl->master->bus_mutex);
+
+       return ret;
+}
+EXPORT_SYMBOL(w1_max1721x_reg_get);
+
+int w1_max1721x_reg_set(struct device *dev, uint16_t addr, uint16_t val)
+{
+       struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+       int ret = -ENODEV;
+
+       if (addr > MAX1721X_MAX_REG_NR || addr < 0 || !dev)
+               return -EFAULT;
+
+       mutex_lock(&sl->master->bus_mutex);
+
+       if (!w1_reset_select_slave(sl)) {
+               w1_write_8(sl->master, W1_MAX1721X_READ_DATA);
+               w1_write_8(sl->master, addr & 0x00FF);
+               w1_write_8(sl->master, addr>>8 & 0x00FF);
+               w1_write_8(sl->master, val & 0x00FF);
+               w1_write_8(sl->master, val>>8 & 0x00FF);
+               ret = 0;
+       }
+
+       mutex_unlock(&sl->master->bus_mutex);
+
+       return ret;
+}
+EXPORT_SYMBOL(w1_max1721x_reg_set);
+
+static int w1_max17211_add_device(struct w1_slave *sl)
+{
+       int ret;
+       struct platform_device *pdev;
+
+       pdev = platform_device_alloc("max1721x-battery", PLATFORM_DEVID_AUTO);
+       if (!pdev)
+               return -ENOMEM;
+       pdev->dev.parent = &sl->dev;
+
+       ret = platform_device_add(pdev);
+       if (ret)
+               goto pdev_add_failed;
+
+       dev_set_drvdata(&sl->dev, pdev);
+
+       return 0;
+
+pdev_add_failed:
+       platform_device_put(pdev);
+
+       return ret;
+}
+
+static void w1_max17211_remove_device(struct w1_slave *sl)
+{
+       struct platform_device *pdev = dev_get_drvdata(&sl->dev);
+
+       platform_device_unregister(pdev);
+}
+
+static struct w1_family_ops w1_max17211_fops = {
+       .add_slave    = w1_max17211_add_device,
+       .remove_slave = w1_max17211_remove_device,
+};
+
+static struct w1_family w1_max17211_family = {
+       .fid = W1_FAMILY_MAX17211,
+       .fops = &w1_max17211_fops,
+};
+module_w1_family(w1_max17211_family);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alex A. Mihaylov <minimum...@rambler.ru>");
+MODULE_DESCRIPTION("1-wire Driver for MAX17211/MAX17215 battery monitor");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_MAX17211));
diff --git a/drivers/w1/slaves/w1_max1721x.h b/drivers/w1/slaves/w1_max1721x.h
new file mode 100644
index 0000000..1deb3d3
--- /dev/null
+++ b/drivers/w1/slaves/w1_max1721x.h
@@ -0,0 +1,101 @@
+/*
+ * 1-Wire implementation for the max17211 chip
+ *
+ * Copyright © 2017, Alex A. Mihaylov <minimum...@rambler.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#ifndef __w1_max17211_h__
+#define __w1_max17211_h__
+
+/* Known commands to the MAX1721X chip */
+#define W1_MAX1721X_READ_DATA          0x69
+#define W1_MAX1721X_WRITE_DATA         0x6C
+
+/* Factory settings (nonvilatile registers) (W1 specific) */
+
+#define MAX1721X_REG_NRSENSE   0x1CF   /* RSense in 10^-5 Ohm */
+/* Strings */
+#define MAX1721X_REG_MFG_STR   0x1CC
+#define MAX1721X_REG_MFG_NUMB  3
+#define MAX1721X_REG_DEV_STR   0x1DB
+#define MAX1721X_REG_DEV_NUMB  5
+/* HEX Strings */
+#define MAX1721X_REG_SER_HEX   0x1D8
+
+/* Number of valid register addresses */
+#define MAX1721X_MAX_REG_NR    (0x1EF)
+
+/* MAX1721X/MAX17215 Output Registers for I2C and W1 chips */
+
+#define MAX172XX_REG_STATUS    0x000   /* status reg */
+#define MAX172XX_BAT_PRESENT   (1<<4)  /* battery connected bit */
+#define MAX172XX_REG_DEVNAME   0x021   /* chip config */
+#define MAX172XX_DEV_MASK      0x000F  /* chip type mask */
+#define MAX172X1_DEV           0x0001
+#define MAX172X5_DEV           0x0005
+#define MAX172XX_REG_TEMP      0x008   /* Temperature */
+#define MAX172XX_REG_BATT      0x0DA   /* Battery voltage */
+#define MAX172XX_REG_CURRENT   0x00A   /* Actual current */
+#define MAX172XX_REG_AVGCURRENT        0x00B   /* Average current */
+#define MAX172XX_REG_REPSOC    0x006   /* Percentage of charge */
+#define MAX172XX_REG_DESIGNCAP 0x018   /* Design capacity */
+#define MAX172XX_REG_REPCAP    0x005   /* Average capacity */
+#define MAX172XX_REG_TTE       0x011   /* Time to empty */
+#define MAX172XX_REG_TTF       0x020   /* Time to full */
+
+/* Convert regs value to power_supply units */
+
+static inline int max172xx_time_to_ps(uint16_t reg)
+{
+       return reg * 5625 / 1000;       /* in sec. */
+}
+
+static inline int max172xx_percent_to_ps(uint16_t reg)
+{
+       return reg / 256;       /* in percent from 0 to 100 */
+}
+
+static inline int max172xx_voltage_to_ps(uint16_t reg)
+{
+       return reg * 1250;      /* in uV */
+}
+
+static inline int max172xx_capacity_to_ps(uint16_t reg)
+{
+       return reg * 500;       /* in uAh */
+}
+
+/*
+ * Current and temperature is signed values, so unsigned regs
+ * value must be converted to signed type
+ */
+
+static inline int max172xx_temperature_to_ps(uint16_t reg)
+{
+       return (int16_t)reg * 10 / 256; /* in tenths of deg. C */
+}
+
+/*
+ * Calculating current registers resolution:
+ *
+ * RSense stored in 10^-5 Ohm, so mesaurment voltage must be
+ * in 10^-11 Volts for get current in uA.
+ * 16 bit current reg fullscale +/-51.2mV is 102400 uV.
+ * So: 102400 / 65535 * 10^5 = 156252
+ */
+static inline int max172xx_current_to_voltage(uint16_t reg)
+{
+       return (int16_t)reg * 156252;
+}
+
+extern int w1_max1721x_reg_get(struct device *dev, uint16_t addr,
+                       uint16_t *val);
+extern int w1_max1721x_reg_set(struct device *dev, uint16_t addr,
+                       uint16_t val);
+
+#endif /* !__w1_max17211_h__ */
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 10a7a07..797c162 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -35,6 +35,7 @@
 #define W1_COUNTER_DS2423      0x1D
 #define W1_THERM_DS1822        0x22
 #define W1_EEPROM_DS2433       0x23
+#define W1_FAMILY_MAX17211     0x26
 #define W1_THERM_DS18B20       0x28
 #define W1_FAMILY_DS2408       0x29
 #define W1_EEPROM_DS2431       0x2D
-- 
2.8.4 (Apple Git-73)

Reply via email to