On Tue, 27 Mar 2007, [EMAIL PROTECTED] wrote:
I meant you do not allocate the entire disk per raidset, which may alter
performance numbers.
No, that would be silly. It does lower the average performance of the
large RAID-5 area, but I don't know how ext3fs is allocating the blocks
anyway, so
04:00.0 RAID bus controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II
Controller (rev 01)
I assume you mean 3132 right?
Yes; did I mistype?
02:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid
II Controller (rev 01)
03:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid
II Controller (rev 01)
04:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid
II Controller (rev 01)
I also have 6 seagates, I'd need to run one
of these tests on them as well, also you took the micro jumper off the
Seagate 400s in the back as well right?
Um... no, I don't remember doing anything like that. What micro jumper?
It's been a while, but I just double-checked the drive manual and
it doesn't mention any jumpers.
The 7200.8's don't use a jumper except for "factory use" - the 7200.9s and
10s I believe have a jumper in the back to enable/disable 3.0GBps
operation. Your model # corresponds with a 7200.8, so nevermind about the
jumper.
Justin.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
