Remove the redundant check of 'rate' in the if statement of the
'pll_set_rate' function
Reported-by: David Binderman <dcb...@hotmail.com>
Signed-off-by: Ray Jui <ray....@broadcom.com>
Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support")
---
drivers/clk/bcm/clk-iproc-pll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c
index e04634c..2d61893 100644
--- a/drivers/clk/bcm/clk-iproc-pll.c
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -277,7 +277,7 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int
rate_index,
if (rate >= VCO_LOW && rate < VCO_HIGH) {
ki = 4;
kp_index = KP_BAND_MID;
- } else if (rate >= VCO_HIGH && rate && rate < VCO_HIGH_HIGH) {
+ } else if (rate >= VCO_HIGH && rate < VCO_HIGH_HIGH) {
ki = 3;
kp_index = KP_BAND_HIGH;
} else if (rate >= VCO_HIGH_HIGH && rate < VCO_MAX) {
--
2.1.4
