On Sun, Apr 02, 2017 at 08:59:44AM +0100, Guillaume Tucker wrote:
> The ARM Mali Midgard GPU family is present in a number of SoCs
> from many different vendors such as Samsung Exynos and Rockchip.
>
> Import the device tree bindings documentation from the r16p0
> release of the Mali Midgard GPU kernel driver:
>
>
> https://developer.arm.com/-/media/Files/downloads/mali-drivers/kernel/mali-midgard-gpu/TX011-SW-99002-r16p0-00rel0.tgz
>
> The following optional bindings have been omitted in this initial
> version as they are only used in very specific cases:
>
> * snoop_enable_smc
> * snoop_disable_smc
> * jm_config
> * power_model
> * system-coherency
> * ipa-model
>
> The example has been simplified accordingly.
>
> The compatible string definition has been limited to
> "arm,mali-midgard" to avoid checkpatch.pl warnings and to match
> what the driver actually expects (as of r16p0 out-of-tree).
>
> CC: John Reitan <john.rei...@arm.com>
> Signed-off-by: Guillaume Tucker <guillaume.tuc...@collabora.com>
> ---
> .../devicetree/bindings/gpu/arm,mali-midgard.txt | 53
> ++++++++++++++++++++++
> 1 file changed, 53 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
>
> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
> b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
> new file mode 100644
> index 000000000000..da8fc6d21bbf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
> @@ -0,0 +1,53 @@
> +#
> +# (C) COPYRIGHT 2013-2016 ARM Limited.
> +# Copyright (C) 2017 Collabora Ltd
> +#
> +# This program is free software and is provided to you under the terms of the
> +# GNU General Public License version 2 as published by the Free Software
> +# Foundation, and any use by you of this program is subject to the terms
> +# of such GNU licence.
> +#
> +
> +
> +ARM Mali Midgard GPU
> +====================
> +
> +Required properties:
> +
> +- compatible : Should be "arm,mali-midgard".
As Neil said...
> +- reg : Physical base address of the device and length of the register area.
> +- interrupts : Contains the three IRQ lines required by Mali Midgard devices.
> +- interrupt-names : Contains the names of IRQ resources in the order they
> were
> + provided in the interrupts property. Must contain: "JOB, "MMU", "GPU".
> +
> +Optional:
> +
> +- clocks : Phandle to clock for the Mali Midgard device.
> +- clock-names : Shall be "clk_mali".
"clk_" is redundant. Actually, if there is only 1 clock, then just drop
names. But there's not at least a core and bus clock?
> +- mali-supply : Phandle to regulator for the Mali device. Refer to
> + Documentation/devicetree/bindings/regulator/regulator.txt for details.
> +- operating-points : Refer to Documentation/devicetree/bindings/power/opp.txt
> + for details.
Is this going to be sufficient vs. operating-points-v2? Or should it be
a power domain with OPPs?
> +
> +Example for a Mali-T602:
> +
> +gpu@0xfc010000 {
Drop the '0x'.
> + compatible = "arm,mali-midgard";
> + reg = <0xfc010000 0x4000>;
> + interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
> + interrupt-names = "JOB", "MMU", "GPU";
> +
> + clocks = <&pclk_mali>;
> + clock-names = "clk_mali";
> + mali-supply = <&vdd_mali>;
> + operating-points = <
> + /* KHz uV */
> + 533000 1250000,
> + 450000 1150000,
> + 400000 1125000,
> + 350000 1075000,
> + 266000 1025000,
> + 160000 925000,
> + 100000 912500,
> + >;
> +};
> --
> 2.11.0
>
