early console in setup code
[    0.000000] Linux version 4.11.0-rc4-00072-gfbc1461 (kbuild@athens) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #122 SMP PREEMPT Thu Mar 30 20:24:32 CST 2017
[    0.000000] Command line: ip=::::vm-kbuild-yocto-ia32-9::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-ia32-9/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-fbc14616f483788afabe77d05bfb99883dc66c73-20170331-102676-cxuzks-0.yaml ARCH=x86_64 kconfig=x86_64-acpi-redef branch=linux-devel/devel-catchup-201703302119 commit=fbc14616f483788afabe77d05bfb99883dc66c73 BOOT_IMAGE=/pkg/linux/x86_64-acpi-redef/gcc-6/fbc14616f483788afabe77d05bfb99883dc66c73/vmlinuz-4.11.0-rc4-00072-gfbc1461 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-kbuild-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/x86_64-acpi-redef/gcc-6/fbc14616f483788afabe77d05bfb99883dc66c73/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal 
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffddfff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffde000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffde max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6b90-0x000f6b9f] mapped at [ffff8800000f6b90]
[    0.000000]   mpc: f6ba0-f6c78
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x03471000, 0x03471fff] PGTABLE
[    0.000000] BRK [0x03472000, 0x03472fff] PGTABLE
[    0.000000] BRK [0x03473000, 0x03473fff] PGTABLE
[    0.000000] BRK [0x03474000, 0x03474fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1fccd000-0x1ffcffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F69B0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE18DC 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE17B8 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 001778 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: APIC 0x000000001FFE182C 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE18A4 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1ffdd001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 1357454307 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x000000001ffddfff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffddfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffddfff]
[    0.000000] On node 0 totalpages: 130940
[    0.000000]   DMA32 zone: 2048 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 130940 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 482 pages/cpu @ffff88001fa00000 s1943576 r0 d30696 u2097152
[    0.000000] pcpu-alloc: s1943576 r0 d30696 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1fa0d840
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128871
[    0.000000] Kernel command line: ip=::::vm-kbuild-yocto-ia32-9::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-ia32-9/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-fbc14616f483788afabe77d05bfb99883dc66c73-20170331-102676-cxuzks-0.yaml ARCH=x86_64 kconfig=x86_64-acpi-redef branch=linux-devel/devel-catchup-201703302119 commit=fbc14616f483788afabe77d05bfb99883dc66c73 BOOT_IMAGE=/pkg/linux/x86_64-acpi-redef/gcc-6/fbc14616f483788afabe77d05bfb99883dc66c73/vmlinuz-4.11.0-rc4-00072-gfbc1461 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-kbuild-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/x86_64-acpi-redef/gcc-6/fbc14616f483788afabe77d05bfb99883dc66c73/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 472324K/523760K available (13316K kernel code, 1489K rwdata, 5824K rodata, 2972K init, 12324K bss, 51436K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.004000] Preemptible hierarchical RCU implementation.
[    0.004000] 	Build-time adjustment of leaf fanout to 64.
[    0.004000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.004000] NR_IRQS:4352 nr_irqs:256 16
[    0.004000] console [ttyS0] enabled
[    0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.004000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.004000] ... MAX_LOCK_DEPTH:          48
[    0.004000] ... MAX_LOCKDEP_KEYS:        8191
[    0.004000] ... CLASSHASH_SIZE:          4096
[    0.004000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.004000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.004000] ... CHAINHASH_SIZE:          32768
[    0.004000]  memory used by lock dependency info: 8639 kB
[    0.004000]  per task-struct memory footprint: 2688 bytes
[    0.004000] ODEBUG: selftest passed
[    0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.004000] hpet clockevent registered
[    0.004013] tsc: Detected 2693.506 MHz processor
[    0.004748] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774024)
[    0.005303] pid_max: default: 32768 minimum: 301
[    0.006088] ACPI: Core revision 20170119
[    0.012104] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.013178] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.014263] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.015973] CPU: Physical Processor ID: 0
[    0.016710] mce: CPU supports 10 MCE banks
[    0.017467] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.018358] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.029111] Freeing SMP alternatives memory: 40K
[    0.031248] smpboot: Max logical packages: 1
[    0.032084] enabled ExtINT on CPU#0
[    0.033767] ENABLING IO-APIC IRQs
[    0.034367] init IO_APIC IRQs
[    0.034878]  apic 0 pin 0 not connected
[    0.035555] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.036027] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.037343] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.038565] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.039915] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.040000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.040000]  apic 0 pin 16 not connected
[    0.040000]  apic 0 pin 17 not connected
[    0.040000]  apic 0 pin 18 not connected
[    0.040000]  apic 0 pin 19 not connected
[    0.040000]  apic 0 pin 20 not connected
[    0.040000]  apic 0 pin 21 not connected
[    0.040000]  apic 0 pin 22 not connected
[    0.040000]  apic 0 pin 23 not connected
[    0.040000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.040000] Using local APIC timer interrupts.
[    0.040000] calibrating APIC timer ...
[    0.040000] ... lapic delta = 6454181
[    0.040000] ... PM-Timer delta = 369645
[    0.040000] APIC calibration not consistent with PM-Timer: 103ms instead of 100ms
[    0.040000] APIC delta adjusted to PM-Timer: 6250050 (6454181)
[    0.040000] TSC delta adjusted to PM-Timer: 269347885 (278144955)
[    0.040000] ..... delta 6250050
[    0.040000] ..... mult: 268437603
[    0.040000] ..... calibration result: 4000032
[    0.040000] ..... CPU clock speed is 2693.1915 MHz.
[    0.040000] ..... host bus clock speed is 1000.0032 MHz.
[    0.040072] smpboot: CPU0: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) (family: 0x6, model: 0x2c, stepping: 0x1)
[    0.052015] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
[    0.088017] smp: Bringing up secondary CPUs ...
[    0.089189] smp: Brought up 1 node, 1 CPU
[    0.089844] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[    0.091434] sched_clock: Marking stable (88000000, 0)->(387239851, -299239851)
[    0.093437] devtmpfs: initialized
[    0.098017] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.101613] futex hash table entries: 256 (order: 3, 32768 bytes)
[    0.102889] xor: measuring software checksum speed
[    0.143992]    prefetch64-sse:  9235.000 MB/sec
[    0.183994]    generic_sse:  6745.000 MB/sec
[    0.184968] xor: using function: prefetch64-sse (9235.000 MB/sec)
[    0.187050] NET: Registered protocol family 16
[    0.193347] cpuidle: using governor ladder
[    0.194049] PCCT header not found.
[    0.196506] ACPI: bus type PCI registered
[    0.197359] PCI: Using configuration type 1 for base access
[    0.224493] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.291992] raid6: sse2x1   gen()  3366 MB/s
[    0.368010] raid6: sse2x1   xor()  2408 MB/s
[    0.448016] raid6: sse2x2   gen()  3411 MB/s
[    0.515996] raid6: sse2x2   xor()  3371 MB/s
[    0.584005] raid6: sse2x4   gen()  8147 MB/s
[    0.652087] raid6: sse2x4   xor()  5717 MB/s
[    0.652850] raid6: using algorithm sse2x4 gen() 8147 MB/s
[    0.653708] raid6: .... xor() 5717 MB/s, rmw enabled
[    0.654516] raid6: using ssse3x2 recovery algorithm
[    0.655504] ACPI: Added _OSI(Module Device)
[    0.656211] ACPI: Added _OSI(Processor Device)
[    0.656966] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.657654] ACPI: Added _OSI(Processor Aggregator Device)
[    0.663446] ACPI: Interpreter enabled
[    0.664017] ACPI: (supports S0 S5)
[    0.664523] ACPI: Using IOAPIC for interrupt routing
[    0.665344] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.675566] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.676564] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[    0.677423] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.679459] PCI host bridge to bus 0000:00
[    0.680034] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.681149] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.682279] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.683354] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    0.684392] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.685213] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.687116] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.689030] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.695320] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    0.698318] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.699351] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.701001] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.701970] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.703000] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.704286] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.705035] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.706213] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.710340] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.716852] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.728851] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.730585] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.734136] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.736892] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.748653] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.750340] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.754787] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.758191] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.768850] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe7fffff 64bit pref]
[    0.773525] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.775414] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    0.783173] pci_bus 0000:00: on NUMA node 0
[    0.785060] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.786176] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.787251] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.788800] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.789744] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.790895] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.796428] SCSI subsystem initialized
[    0.800063] libata version 3.00 loaded.
[    0.800749] ACPI: bus type USB registered
[    0.801396] usbcore: registered new interface driver usbfs
[    0.802289] usbcore: registered new interface driver hub
[    0.803254] usbcore: registered new device driver usb
[    0.804130] Linux video capture interface: v2.00
[    0.804938] pps_core: LinuxPPS API ver. 1 registered
[    0.805742] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.807232] PTP clock support registered
[    0.808158] wmi: Mapper loaded
[    0.812099] Advanced Linux Sound Architecture Driver Initialized.
[    0.813143] PCI: Using ACPI for IRQ routing
[    0.813770] PCI: pci_cache_line_size set to 64 bytes
[    0.814844] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.815957] e820: reserve RAM buffer [mem 0x1ffde000-0x1fffffff]
[    0.821682] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.822617] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.826956] clocksource: Switched to clocksource kvm-clock
[    0.828154] pnp: PnP ACPI init
[    0.828798] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.830004] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.831260] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.832392] pnp 00:03: [dma 2]
[    0.832908] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.834103] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.835324] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.836613] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.838314] pnp: PnP ACPI: found 7 devices
[    0.844694] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.846194] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.847313] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.848291] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.849313] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    0.850808] NET: Registered protocol family 2
[    0.852111] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.853181] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[    0.854605] TCP: Hash tables configured (established 4096 bind 4096)
[    0.855701] UDP hash table entries: 256 (order: 3, 49152 bytes)
[    0.857116] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[    0.858505] NET: Registered protocol family 1
[    0.867654] RPC: Registered named UNIX socket transport module.
[    0.868822] RPC: Registered udp transport module.
[    0.869496] RPC: Registered tcp transport module.
[    0.870291] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.871579] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.872661] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.873550] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.874849] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.876449] PCI: CLS 0 bytes, default 64
[    0.877318] Trying to unpack rootfs image as initramfs...
[    1.245607] Freeing initrd memory: 3084K
[    1.248739] cryptomgr_test (30) used greatest stack depth: 15064 bytes left
[    1.250799] AVX or AES-NI instructions are not detected.
[    1.251608] CPU feature 'AVX registers' is not supported.
[    1.252380] CPU feature 'AVX registers' is not supported.
[    1.253177] CPU feature 'AVX registers' is not supported.
[    1.254331] audit: initializing netlink subsys (disabled)
[    1.259677] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[    1.275856] NFS: Registering the id_resolver key type
[    1.277653] Key type id_resolver registered
[    1.278491] Key type id_legacy registered
[    1.280522] SGI XFS with security attributes, no debug enabled
[    1.295398] 9p: Installing v9fs 9p2000 file system support
[    1.296986] NILFS version 2 loaded
[    1.299946] Key type asymmetric registered
[    1.300576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.301691] io scheduler noop registered (default)
[    1.302319] io scheduler mq-deadline registered
[    1.302863] start plist test
[    1.305355] end plist test
[    1.310841] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1
[    1.311605] crc32: self tests passed, processed 225944 bytes in 2416775 nsec
[    1.315696] crc32c: CRC_LE_BITS = 1
[    1.316179] crc32c: self tests passed, processed 225944 bytes in 1383608 nsec
[    1.442864] crc32_combine: 8373 self tests passed
[    1.593389] crc32c_combine: 8373 self tests passed
[    1.594254] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    1.595966] rivafb_setup START
[    1.596653] vmlfb: initializing
[    1.597319] usbcore: registered new interface driver udlfb
[    1.603332] usbcore: registered new interface driver smscufx
[    1.604274] intel_idle: does not run on family 6 model 44
[    1.605299] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.611664] ACPI: Power Button [PWRF]
[    1.940456] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    1.989867] r3964: Philips r3964 Driver $Revision: 1.10 $
[    1.991536] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.025740] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.051507] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.053629] Initializing Nozomi driver 2.1d
[    2.054350] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    2.055415] ac.o: No PCI boards found.
[    2.055965] ac.o: For an ISA board you must supply memory and irq parameters.
[    2.057469] Non-volatile memory driver v1.3
[    2.058619] Linux agpgart interface v0.103
[    2.059439] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    2.136184] brd: module loaded
[    2.143695] mtip32xx Version 1.3.1
[    2.144326] Phantom Linux Driver, version n0.9.8, init OK
[    2.145506] usbcore: registered new interface driver viperboard
[    2.146567] Uniform Multi-Platform E-IDE driver
[    2.147594] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    2.148875] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    2.151226]     ide0: BM-DMA at 0xc080-0xc087
[    2.151892]     ide1: BM-DMA at 0xc088-0xc08f
[    2.152529] Probing IDE interface ide0...
[    2.259139] tsc: Refined TSC clocksource calibration: 2693.502 MHz
[    2.260210] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d34404bd2, max_idle_ns: 440795222183 ns
[    2.767213] Probing IDE interface ide1...
[    3.555712] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[    4.275136] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[    4.276310] hdc: MWDMA2 mode selected
[    4.277163] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.277957] ide1 at 0x170-0x177,0x376 on irq 15
[    4.285902] ide-gd driver 1.18
[    4.286729] Loading iSCSI transport class v2.0-870.
[    4.293324] fnic: Cisco FCoE HBA Driver, ver 1.6.0.21
[    4.294710] fnic: Successfully Initialized Trace Buffer
[    4.296060] fnic: Successfully Initialized FC_CTLR Trace Buffer
[    4.302607] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    4.303826] Detecting Adaptec I2O RAID controllers...
[    4.304894] Adaptec aacraid driver 1.2.1[50792]-custom
[    4.306937] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 9.00.00.00-k.
[    4.309520] csiostor: Chelsio FCoE driver 1.0.0
[    4.310896] megasas: 07.701.17.00-rc1
[    4.321600] mpt3sas version 15.100.00.00 loaded
[    4.323332] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.324922] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015)
[    4.327631] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[    4.329979] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015)
[    4.333943] iscsi: registered transport (cxgb3i)
[    4.335431] Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015)
[    4.336784] iscsi: registered transport (cxgb4i)
[    4.338078] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[    4.340108] iscsi: registered transport (bnx2i)
[    4.346234] iscsi: registered transport (be2iscsi)
[    4.347616] In beiscsi_module_init, tt=ffffffff824b9ba0
[    4.349837] Error: Driver 'pata_platform' is already registered, aborting...
[    4.353823] SSFDC read-only Flash Translation layer
[    4.355609] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[    4.357255] device id = 2440
[    4.357891] device id = 2480
[    4.358705] device id = 24c0
[    4.359692] device id = 24d0
[    4.360210] device id = 25a1
[    4.360820] device id = 2670
[    4.362056] slram: not enough parameters.
[    4.363912] ftl_cs: FTL header not found.
[    4.365993] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    4.375228] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[    4.378272] libphy: Fixed MDIO Bus: probed
[    4.380334] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    4.381927] Copyright (c) 2007 Atheros Corporation.
[    4.383466] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[    4.389278] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    4.396405] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    4.690153] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    5.072586] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    5.073462] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    5.074403] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    5.075152] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    5.075816] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    5.076584] igb: Copyright (c) 2007-2014 Intel Corporation.
[    5.077301] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.0.0-k
[    5.078209] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    5.087852] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.65
[    5.091449] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[    5.092838] tehuti: Options: hw_csum 
[    5.093556] usbcore: registered new interface driver catc
[    5.094453] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    5.095727] usbcore: registered new interface driver pegasus
[    5.097232] usbcore: registered new interface driver ipheth
[    5.099019] aoe: AoE v85 initialised.
[    5.099710] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.100750] ohci-pci: OHCI PCI platform driver
[    5.101526] ohci-platform: OHCI generic platform driver
[    5.106513] usbcore: registered new interface driver cdc_acm
[    5.107495] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    5.109292] usbcore: registered new interface driver usblp
[    5.110337] usbcore: registered new interface driver cdc_wdm
[    5.111389] usbcore: registered new interface driver usb-storage
[    5.112793] usbcore: registered new interface driver ums-alauda
[    5.117420] usbcore: registered new interface driver ums-datafab
[    5.118458] usbcore: registered new interface driver ums-freecom
[    5.122551] usbcore: registered new interface driver ums-jumpshot
[    5.123412] usbcore: registered new interface driver ums-realtek
[    5.124348] usbcore: registered new interface driver ums-sddr55
[    5.125192] usbcore: registered new interface driver mdc800
[    5.125846] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    5.126971] usbcore: registered new interface driver cypress_cy7c63
[    5.127687] usbcore: registered new interface driver emi62 - firmware loader
[    5.128648] usbcore: registered new interface driver iowarrior
[    5.129416] usbcore: registered new interface driver usblcd
[    5.130142] usbcore: registered new interface driver rio500
[    5.131107] usbcore: registered new interface driver usbtest
[    5.131885] usbcore: registered new interface driver usbsevseg
[    5.133154] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    5.134036] dummy_hcd dummy_hcd.0: Dummy host controller
[    5.134673] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    5.135638] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.136604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.137575] usb usb1: Product: Dummy host controller
[    5.138229] usb usb1: Manufacturer: Linux 4.11.0-rc4-00072-gfbc1461 dummy_hcd
[    5.139169] usb usb1: SerialNumber: dummy_hcd.0
[    5.140189] hub 1-0:1.0: USB hub found
[    5.140928] hub 1-0:1.0: 1 port detected
[    5.141859] Mass Storage Function, version: 2009/09/11
[    5.142562] LUN: removable file: (no medium)
[    5.143056] no file given for LUN0
[    5.143862] g_acm_ms dummy_udc.0: failed to start g_acm_ms: -22
[    5.144760] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    5.146637] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.147289] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.148954] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    5.150651] usbcore: registered new interface driver bcm5974
[    5.153940] usbcore: registered new interface driver synaptics_usb
[    5.154740] usbcore: registered new interface driver gtco
[    5.155315] usbcore: registered new interface driver hanwang
[    5.156218] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[    5.156995] usbcore: registered new interface driver ati_remote2
[    5.157698] cm109: Keymap for Komunikate KIP1000 phone loaded
[    5.158554] usbcore: registered new interface driver cm109
[    5.159164] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    5.160402] i2c-parport-light: adapter type unspecified
[    5.161315] IR NEC protocol handler initialized
[    5.161839] IR SANYO protocol handler initialized
[    5.162499] IR Sharp protocol handler initialized
[    5.163073] IR XMP protocol handler initialized
[    5.163732] usbcore: registered new interface driver imon
[    5.164645] usbcore: registered new interface driver mceusb
[    5.165712] rc rc0: rc-core loopback device as /devices/virtual/rc/rc0
[    5.166547] Registered IR keymap rc-empty
[    5.167094] input: rc-core loopback device as /devices/virtual/rc/rc0/input4
[    5.168041] pps_ldisc: PPS line discipline registered
[    5.168663] Driver for 1-wire Dallas network protocol.
[    5.169404] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[    5.170549] applesmc: supported laptop not found!
[    5.171197] applesmc: driver init failed (ret=-19)!
[    5.172602] intel_powerclamp: CPU does not support MWAIT
[    5.172629] acquirewdt: WDT driver for Acquire single board computer initialising
[    5.174217] acquirewdt: I/O address 0x0043 already in use
[    5.174860] acquirewdt: probe of acquirewdt failed with error -5
[    5.175745] ib700wdt: WDT driver for IB700 single board computer initialising
[    5.177101] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[    5.178604] wafer5823wdt: I/O address 0x0443 already in use
[    5.179494] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.180446] sc1200wdt: build 20020303
[    5.181054] sc1200wdt: io parameter must be specified
[    5.181713] cpu5wdt: misc_register failed
[    5.182390] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[    5.184350] smsc37b787_wdt: Unable to register miscdev on minor 130
[    5.185266] machzwd: MachZ ZF-Logic Watchdog driver initializing
[    5.186183] machzwd: no ZF-Logic found
[    5.187324] ashmem: initialized
[    5.188051] acer_wmi: Acer Laptop ACPI-WMI Extras
[    5.188751] acer_wmi: No or unsupported WMI interface, unable to load
[    5.189569] fujitsu_tablet: Unknown (using defaults)
[    5.190308] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
[    5.192600] usbcore: registered new interface driver snd-usb-audio
[    5.193658] usbcore: registered new interface driver snd-ua101
[    5.194657] usbcore: registered new interface driver snd-usb-us122l
[    5.195764] usbcore: registered new interface driver snd-usb-caiaq
[    5.197103] Netfilter messages via NETLINK v0.30.
[    5.197920] nfnl_acct: registering with nfnetlink.
[    5.198794] xt_time: kernel timezone is -0000
[    5.199554] ip_set: protocol 6
[    5.200094] IPVS: Registered protocols (ESP)
[    5.200819] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    5.201943] IPVS: Each connection entry needs 408 bytes at least
[    5.203023] IPVS: Creating netns size=2176 id=0
[    5.203626] IPVS: ipvs loaded.
[    5.204143] IPVS: [lc] scheduler registered.
[    5.204633] IPVS: [wlc] scheduler registered.
[    5.205151] IPVS: [lblc] scheduler registered.
[    5.205642] IPVS: [dh] scheduler registered.
[    5.206195] IPVS: [sed] scheduler registered.
[    5.206733] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    5.207574] Initializing XFRM netlink socket
[    5.208293] 9pnet: Installing 9P2000 support
[    5.208835] NET: Registered protocol family 37
[    5.209353] Key type dns_resolver registered
[    5.209968] Key type ceph registered
[    5.215085] libceph: loaded (mon/osd proto 15/24)
[    5.218885] ... APIC ID:      00000000 (0)
[    5.219666] ... APIC VERSION: 01050014
[    5.220551] 0000000000000000000000000000000000000000000000000000000000000000
[    5.221760] 0000000000000000000000000000000000000000000000000000000000000000
[    5.223130] 0000000000000000000000000000000000000000000000000000000000008000
[    5.224659] number of MP IRQ sources: 15.
[    5.225605] number of IO-APIC #0 registers: 24.
[    5.226148] testing the IO APIC.......................
[    5.226764] IO APIC #0......
[    5.227099] .... register #00: 00000000
[    5.228534] .......    : physical APIC id: 00
[    5.229491] .......    : Delivery Type: 0
[    5.230006] .......    : LTS          : 0
[    5.230564] .... register #01: 00170011
[    5.231052] .......     : max redirection entries: 17
[    5.231770] .......     : PRQ implemented: 0
[    5.232323] .......     : IO APIC version: 11
[    5.232993] .... register #02: 00000000
[    5.233537] .......     : arbitration: 00
[    5.234064] .... IRQ redirection table:
[    5.234636] IOAPIC 0:
[    5.235034]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.236223]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[    5.237368]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[    5.238430]  pin03, disabled, edge , high, V(33), IRR(0), S(0), logical , D(01), M(1)
[    5.239740]  pin04, disabled, edge , high, V(34), IRR(0), S(0), logical , D(01), M(1)
[    5.241186]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(01), M(1)
[    5.242715]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(01), M(1)
[    5.244308]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[    5.245445]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(01), M(1)
[    5.246418]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[    5.247312]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(01), M(1)
[    5.248417]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(01), M(1)
[    5.249580]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[    5.250843]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(01), M(1)
[    5.251789]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[    5.253216]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[    5.254421]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.255389]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.256666]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.258015]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.259243]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.260439]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.261685]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.262890]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.264087] IRQ to pin mappings:
[    5.264591] IRQ0 -> 0:2
[    5.265044] IRQ1 -> 0:1
[    5.265442] IRQ3 -> 0:3
[    5.265945] IRQ4 -> 0:4
[    5.266500] IRQ5 -> 0:5
[    5.266897] IRQ6 -> 0:6
[    5.267319] IRQ7 -> 0:7
[    5.267710] IRQ8 -> 0:8
[    5.268094] IRQ9 -> 0:9
[    5.268487] IRQ10 -> 0:10
[    5.268953] IRQ11 -> 0:11
[    5.269437] IRQ12 -> 0:12
[    5.269850] IRQ13 -> 0:13
[    5.270245] IRQ14 -> 0:14
[    5.270670] IRQ15 -> 0:15
[    5.271097] .................................... done.
[    5.272364] registered taskstats version 1
[    5.278873] Btrfs loaded, crc32c=crc32c-generic
[    5.281509] Key type trusted registered
[    5.283253] cryptomgr_probe (141) used greatest stack depth: 14440 bytes left
[    5.286696] Key type encrypted registered
[    5.596572] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    7.315697] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[    7.334984] Sending DHCP requests ., OK
[    7.343696] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[    7.343700] IP-Config: Complete:
[    7.343703]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[    7.343710]      host=vm-kbuild-yocto-ia32-9, domain=, nis-domain=(none)
[    7.343711]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[    7.348249] ALSA device list:
[    7.348251]   No soundcards found.
[    7.357731] Freeing unused kernel memory: 2972K
[    7.357733] Write protecting the kernel read-only data: 20480k
[    7.365705] Freeing unused kernel memory: 1004K
[    7.369793] Freeing unused kernel memory: 320K
[    7.379915] mount (148) used greatest stack depth: 14408 bytes left
[    7.393391] nfsroot (155) used greatest stack depth: 14232 bytes left
mkdir: can't create directory '/var/lock': No such file or directory
mkdir: can't create directory '/var/lock/lkp-bootstrap.lock': No such file or directory
sleep: invalid number '333.3'
[    7.417901] cat (164) used greatest stack depth: 14120 bytes left
/ # PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lkp/lkp/src/bin
LKP: HOSTNAME vm-kbuild-yocto-ia32-9, MAC fa:8a:d9:5a:1a:fb, kernel 4.11.0-rc4-00072-gfbc1461 122, serial console /dev/ttyS0
[    7.452715] ip (185) used greatest stack depth: 13928 bytes left
[    7.473781] cp (208) used greatest stack depth: 13896 bytes left
[    7.766995] wait (267) used greatest stack depth: 13800 bytes left
[    7.794984] random: fast init done
[    8.442756] Kernel tests: Boot OK!
[    8.442756] /lkp/lkp/src/bin/run-lkp
[    8.442756] RESULT_ROOT=/result/trinity/300s/vm-kbuild-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/x86_64-acpi-redef/gcc-6/fbc14616f483788afabe77d05bfb99883dc66c73/0
[    8.442756] job=/lkp/scheduled/vm-kbuild-yocto-ia32-9/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-fbc14616f483788afabe77d05bfb99883dc66c73-20170331-102676-cxuzks-0.yaml
[    8.442756] run-job /lkp/scheduled/vm-kbuild-yocto-ia32-9/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-fbc14616f483788afabe77d05bfb99883dc66c73-20170331-102676-cxuzks-0.yaml
[    8.442756] /bin/busybox wget -q http://inn:80/~lkp/cgi-bin/lkp-jobfile-append-var?job_file=/lkp/scheduled/vm-kbuild-yocto-ia32-9/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-fbc14616f483788afabe77d05bfb99883dc66c73-20170331-102676-cxuzks-0.yaml&job_state=running -O /dev/null
[    8.750653] trinity (276) used greatest stack depth: 13784 bytes left
[   19.530456] trinity-main uses obsolete (PF_INET,SOCK_PACKET)
[   19.575512] trinity-c3 (301) used greatest stack depth: 13176 bytes left
[   19.598860] VFS: Warning: trinity-c1 using old stat() call. Recompile your binary.
[   19.609388] VFS: Warning: trinity-c1 using old stat() call. Recompile your binary.
[   19.801520] trinity-c0 (370) used greatest stack depth: 13112 bytes left
[   19.805623] VFS: Warning: trinity-c3 using old stat() call. Recompile your binary.
[   19.856297] trinity-c0 (385) used greatest stack depth: 12984 bytes left
[   20.339619] raw_sendmsg: trinity-c3 forgot to set AF_INET. Fix it!
[   20.589801] trinity-c3 (483) used greatest stack depth: 12728 bytes left
[   21.009531] VFS: Warning: trinity-c2 using old stat() call. Recompile your binary.
[   21.148898] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
[   22.298208] warning: process `trinity-c2' used the deprecated sysctl system call with 

Elapsed time: 310
BUG: kernel reboot-without-warning in test stage

initrds=(
	/osimage/yocto/yocto-tiny-i386-2016-04-22.cgz
	/lkp/scheduled/vm-kbuild-yocto-ia32-9/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-fbc14616f483788afabe77d05bfb99883dc66c73-20170331-102676-cxuzks-0.cgz
	/lkp/lkp/lkp-i386.cgz
	/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig.i386_2016-09-03.cgz
	/osimage/pkg/static/trinity-i386.cgz
)

cat "${initrds[@]}" > /fs/sda1/initrd-vm-kbuild-yocto-ia32-9

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-cpu Westmere
	-kernel /pkg/linux/x86_64-acpi-redef/gcc-6/fbc14616f483788afabe77d05bfb99883dc66c73/vmlinuz-4.11.0-rc4-00072-gfbc1461
	-initrd /fs/sda1/initrd-vm-kbuild-yocto-ia32-9
	-m 512
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-drive file=/fs/sda1/disk0-vm-kbuild-yocto-ia32-9,media=disk,if=virtio
	-pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-ia32-9
	-serial file:/dev/shm/kboot/vm-kbuild-yocto-ia32-9/serial
	-serial file:/dev/shm/kboot/vm-kbuild-yocto-ia32-9/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-kbuild-yocto-ia32-9::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-kbuild-yocto-ia32-9/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-fbc14616f483788afabe77d05bfb99883dc66c73-20170331-102676-cxuzks-0.yaml
	ARCH=x86_64
	kconfig=x86_64-acpi-redef
	branch=linux-devel/devel-catchup-201703302119
	commit=fbc14616f483788afabe77d05bfb99883dc66c73
	BOOT_IMAGE=/pkg/linux/x86_64-acpi-redef/gcc-6/fbc14616f483788afabe77d05bfb99883dc66c73/vmlinuz-4.11.0-rc4-00072-gfbc1461
	max_uptime=1500
	RESULT_ROOT=/result/trinity/300s/vm-kbuild-yocto-ia32/yocto-tiny-i386-2016-04-22.cgz/x86_64-acpi-redef/gcc-6/fbc14616f483788afabe77d05bfb99883dc66c73/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
