early console in setup code
[    0.000000] Linux version 4.11.0-rc3-00006-ga83b576 (kbuild@lkp-hsx03) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP PREEMPT Thu Mar 23 03:46:34 CST 2017
[    0.000000] Command line: ip=::::vm-kbuild-yocto-x86_64-28::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-28/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a-20170323-129860-261i1-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-03230128 branch=linux-devel/devel-spot-201703230053 commit=a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/vmlinuz-4.11.0-rc3-00006-ga83b576 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 cons
[    0.000000] KERNEL supported cpus:
[    0.000000]   Centaur CentaurHauls
[    0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[    0.000000] CPU: Your system may be unstable.
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffddfff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffde000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffde max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6b90-0x000f6b9f] mapped at [ffff8800000f6b90]
[    0.000000]   mpc: f6ba0-f6c78
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x04741000, 0x04741fff] PGTABLE
[    0.000000] BRK [0x04742000, 0x04742fff] PGTABLE
[    0.000000] BRK [0x04743000, 0x04743fff] PGTABLE
[    0.000000] BRK [0x04744000, 0x04744fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1fb21000-0x1ffcffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F69B0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE18DC 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE17B8 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 001778 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: APIC 0x000000001FFE182C 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE18A4 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffddfff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1ffdb000-0x1ffddfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1ffda001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 164098250 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x000000001ffddfff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffddfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffddfff]
[    0.000000] On node 0 totalpages: 130940
[    0.000000]   DMA32 zone: 2048 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 130940 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 33 pages/cpu @ffff88001f800000 s106368 r0 d28800 u2097152
[    0.000000] pcpu-alloc: s106368 r0 d28800 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1f80c800
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 128871
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ip=::::vm-kbuild-yocto-x86_64-28::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-28/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a-20170323-129860-261i1-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-03230128 branch=linux-devel/devel-spot-201703230053 commit=a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/vmlinuz-4.11.0-rc3-00006-ga83b576 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,1152
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Memory: 453904K/523760K available (11895K kernel code, 1081K rwdata, 4116K rodata, 996K init, 36020K bss, 69856K reserved, 0K cma-reserved)
[    0.001000] Preemptible hierarchical RCU implementation.
[    0.001000] 	Build-time adjustment of leaf fanout to 64.
[    0.001000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[    0.001000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.001000] NR_IRQS:4352 nr_irqs:256 16
[    0.001000] console [ttyS0] enabled
[    0.001000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001000] ... MAX_LOCK_DEPTH:          48
[    0.001000] ... MAX_LOCKDEP_KEYS:        8191
[    0.001000] ... CLASSHASH_SIZE:          4096
[    0.001000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001000] ... CHAINHASH_SIZE:          32768
[    0.001000]  memory used by lock dependency info: 8127 kB
[    0.001000]  per task-struct memory footprint: 1920 bytes
[    0.001000] ------------------------
[    0.001000] | Locking API testsuite:
[    0.001000] ----------------------------------------------------------------------------
[    0.001000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]               recursive read-lock:             |  ok  |             |failed|
[    0.001000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.001000]             mixed read-write-lock:             |failed|             |failed|
[    0.001000]             mixed write-read-lock:             |failed|             |failed|
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.001000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.001000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.001000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.001000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.001000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.001000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.001000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.001000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.001000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.001000]       hard-irq read-recursion/123:  ok  |
[    0.001000]       soft-irq read-recursion/123:  ok  |
[    0.001000]       hard-irq read-recursion/132:  ok  |
[    0.001000]       soft-irq read-recursion/132:  ok  |
[    0.001000]       hard-irq read-recursion/213:  ok  |
[    0.001000]       soft-irq read-recursion/213:  ok  |
[    0.001000]       hard-irq read-recursion/231:  ok  |
[    0.001000]       soft-irq read-recursion/231:  ok  |
[    0.001000]       hard-irq read-recursion/312:  ok  |
[    0.001000]       soft-irq read-recursion/312:  ok  |
[    0.001000]       hard-irq read-recursion/321:  ok  |
[    0.001000]       soft-irq read-recursion/321:  ok  |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]   | Wound/wait tests |
[    0.001000]   ---------------------
[    0.001000]                   ww api failures:  ok  |  ok  |  ok  |
[    0.001000]                ww contexts mixing:failed|  ok  |
[    0.001000]              finishing ww context:  ok  |  ok  |  ok  |  ok  |
[    0.001000]                locking mismatches:  ok  |  ok  |  ok  |
[    0.001000]                  EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]            spinlock nest unlocked:  ok  |
[    0.001000]   -----------------------------------------------------
[    0.001000]                                  |block | try  |context|
[    0.001000]   -----------------------------------------------------
[    0.001000]                           context:failed|  ok  |  ok  |
[    0.001000]                               try:failed|  ok  |failed|
[    0.001000]                             block:failed|  ok  |failed|
[    0.001000]                          spinlock:failed|  ok  |failed|
[    0.001000] --------------------------------------------------------
[    0.001000] 141 out of 253 testcases failed, as expected. |
[    0.001000] ----------------------------------------------------
[    0.001000] ODEBUG: selftest passed
[    0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.001000] hpet clockevent registered
[    0.001014] tsc: Detected 2693.506 MHz processor
[    0.002015] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693506)
[    0.003008] pid_max: default: 4096 minimum: 301
[    0.003806] ACPI: Core revision 20170119
[    0.008115] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.009117] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.010148] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.011077] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.012011] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.014065] mce: CPU supports 10 MCE banks
[    0.014978] mce: unknown CPU type - not enabling MCE support
[    0.015007] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.016006] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.029023] Freeing SMP alternatives memory: 40K
[    0.030708] smpboot: Max logical packages: 1
[    0.031077] enabled ExtINT on CPU#0
[    0.033430] ENABLING IO-APIC IRQs
[    0.034012] init IO_APIC IRQs
[    0.034560]  apic 0 pin 0 not connected
[    0.035024] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.036020] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.037000]  apic 0 pin 16 not connected
[    0.037000]  apic 0 pin 17 not connected
[    0.037000]  apic 0 pin 18 not connected
[    0.037000]  apic 0 pin 19 not connected
[    0.037000]  apic 0 pin 20 not connected
[    0.037000]  apic 0 pin 21 not connected
[    0.037000]  apic 0 pin 22 not connected
[    0.037000]  apic 0 pin 23 not connected
[    0.037000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.037000] TSC deadline timer enabled
[    0.037000] smpboot: CPU0: GenuineIntel Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1)
[    0.040019] Performance Events: no PMU driver, software events only.
[    0.049011] smp: Bringing up secondary CPUs ...
[    0.049848] smp: Brought up 1 node, 1 CPU
[    0.050011] ----------------
[    0.050522] | NMI testsuite:
[    0.051006] --------------------
[    0.051584]   remote IPI:  ok  |
[    0.052012]    local IPI:  ok  |
[    0.052583] --------------------
[    0.053007] Good, all   2 testcases passed! |
[    0.053801] ---------------------------------
[    0.054008] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[    0.055258] sched_clock: Marking stable (55000000, 0)->(479386774, -424386774)
[    0.056917] devtmpfs: initialized
[    0.058642] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.062368] futex hash table entries: 16 (order: -1, 2048 bytes)
[    0.063567] xor: automatically using best checksumming function   avx       
[    0.064952] NET: Registered protocol family 16
[    0.066624] workqueue: round-robin CPU selection forced, expect performance impact
[    0.069041] cpuidle: using governor menu
[    0.070129] ACPI: bus type PCI registered
[    0.070867] PCI: Using configuration type 1 for base access
[    0.089112] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.113089] raid6: sse2x1   gen()  4406 MB/s
[    0.132177] raid6: sse2x1   xor()  3330 MB/s
[    0.151269] raid6: sse2x2   gen()  6031 MB/s
[    0.170144] raid6: sse2x2   xor()  4156 MB/s
[    0.189222] raid6: sse2x4   gen()  7031 MB/s
[    0.208339] raid6: sse2x4   xor()  4755 MB/s
[    0.209176] raid6: using algorithm sse2x4 gen() 7031 MB/s
[    0.210160] raid6: .... xor() 4755 MB/s, rmw enabled
[    0.210960] raid6: using ssse3x2 recovery algorithm
[    0.211890] ACPI: Added _OSI(Module Device)
[    0.212659] ACPI: Added _OSI(Processor Device)
[    0.213493] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.214328] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219310] ACPI: Interpreter enabled
[    0.220024] ACPI: (supports S0 S4 S5)
[    0.222724] ACPI: Using IOAPIC for interrupt routing
[    0.223706] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.234763] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.235871] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.236953] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.238149] PCI host bridge to bus 0000:00
[    0.238816] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.240047] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.243287] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.244746] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    0.246061] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.247076] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.248854] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.250954] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.258481] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    0.275496] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.276763] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.277915] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.279112] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.280775] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.282368] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.283710] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.285742] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.292224] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.299316] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.320251] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.322270] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.325178] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.336086] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.354579] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.359101] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.366837] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.372742] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.384088] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe7fffff 64bit pref]
[    0.394184] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.396328] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    0.406412] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.407671] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.408871] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.412299] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.413537] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.414695] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.415880] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.417048] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.418499] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.419453] vgaarb: loaded
[    0.420526] SCSI subsystem initialized
[    0.422219] libata version 3.00 loaded.
[    0.422931] Linux cec interface: v0.10
[    0.423837] Linux video capture interface: v2.00
[    0.424631] pps_core: LinuxPPS API ver. 1 registered
[    0.425492] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.428243] FPGA manager framework
[    0.428815] PCI: Using ACPI for IRQ routing
[    0.429553] PCI: pci_cache_line_size set to 64 bytes
[    0.432750] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.433859] e820: reserve RAM buffer [mem 0x1ffde000-0x1fffffff]
[    0.435151] NET: Registered protocol family 23
[    0.436180] nfc: nfc_init: NFC Core ver 0.1
[    0.436948] NET: Registered protocol family 39
[    0.439154] clocksource: Switched to clocksource kvm-clock
[    0.440396] VFS: Disk quotas dquot_6.6.0
[    0.441067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.442255] FS-Cache: Loaded
[    0.442807] pnp: PnP ACPI init
[    0.445873] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.447069] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.448246] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.449363] pnp 00:03: [dma 2]
[    0.449956] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.451291] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.452620] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.453921] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.455704] pnp: PnP ACPI: found 7 devices
[    0.463911] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.465484] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.466569] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.467668] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.468910] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    0.470156] NET: Registered protocol family 1
[    0.470891] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.471856] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.472793] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.473845] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.475206] PCI: CLS 0 bytes, default 64
[    0.476013] Trying to unpack rootfs image as initramfs...
[    0.889187] Freeing initrd memory: 4796K
[    0.911475] AVX2 or AES-NI instructions are not detected.
[    0.912375] AVX2 instructions are not detected.
[    0.913194] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    0.915965] spin_lock-torture: Creating torture_shuffle task
[    0.916925] spin_lock-torture: Creating torture_stutter task
[    0.918017] spin_lock-torture: torture_shuffle task started
[    0.918943] spin_lock-torture: Creating lock_torture_writer task
[    0.919944] spin_lock-torture: torture_stutter task started
[    0.920850] spin_lock-torture: Creating lock_torture_writer task
[    0.921832] spin_lock-torture: lock_torture_writer task started
[    0.922800] spin_lock-torture: Creating lock_torture_stats task
[    0.923774] spin_lock-torture: lock_torture_writer task started
[    0.924826] spin_lock-torture: lock_torture_stats task started
[    1.949250] tsc: Refined TSC clocksource calibration: 2692.521 MHz
[    1.950363] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26cfa551cc3, max_idle_ns: 440795322428 ns
[   43.520166] torture_init_begin: Refusing rcu init: spin_lock running.
[   43.532633] torture_init_begin: One torture test at a time!
[   43.548863] workingset: timestamp_bits=40 max_order=17 bucket_order=0
[   43.552352] zbud: loaded
[   43.554761] JFS: nTxBlock = 3583, nTxLock = 28671
[   43.557080] SGI XFS with security attributes, debug enabled
[   43.562898] NILFS version 2 loaded
[   43.563506] ocfs2 stack glue: unable to register sysctl
[   43.565455] OCFS2 User DLM kernel interface loaded
[   43.572443] gfs2: GFS2 installed
[   43.586220] NET: Registered protocol family 38
[   43.587038] Key type asymmetric registered
[   43.588941] Asymmetric key parser 'x509' registered
[   43.589956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[   43.594942] io scheduler noop registered
[   43.595585] io scheduler deadline registered
[   43.596452] io scheduler cfq registered (default)
[   43.597240] io scheduler mq-deadline registered
[   43.598009] test_string_helpers: Running tests...
[   43.601658] test_firmware: interface ready
[   43.618536] test_hash: __hash_32() has no arch implementation to test.
[   43.621639] test_hash: hash_32() has no arch implementation to test.
[   43.622700] test_hash: hash_64() has no arch implementation to test.
[   43.625364] test_hash: 33152 tests passed.
[   43.626231] test_siphash: self-tests: pass
[   43.627025] Running rhashtable test nelem=8, max_size=0, shrinking=0
[   43.628024] Test 00:
[   43.633995]   Adding 50000 keys
[   43.697198]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   43.733226]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   43.734669]   Deleting 50000 keys
[   43.760511]   Duration of test: 125845886 ns
[   43.761458] Test 01:
[   43.764010]   Adding 50000 keys
[   43.825916]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   43.861872]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   43.863278]   Deleting 50000 keys
[   43.888982]   Duration of test: 124283716 ns
[   43.889870] Test 02:
[   43.892484]   Adding 50000 keys
[   43.968247]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   44.005877]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   44.007288]   Deleting 50000 keys
[   44.033468]   Duration of test: 140421914 ns
[   44.034388] Test 03:
[   44.036963]   Adding 50000 keys
[   44.100846]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   44.133357]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   44.134672]   Deleting 50000 keys
[   44.156287]   Duration of test: 118742627 ns
[   44.157089] Average test time: 127323535
[   44.157709] Testing concurrent rhashtable access from 10 threads
[   47.136052] Started 10 threads, 0 failed
[   47.143602] test_printf: all 260 tests passed
[   47.220726] test_bitmap: all 460506 tests passed
[   47.224394] test_uuid: all 18 tests passed
[   47.225673] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[   47.226611] crc32: self tests passed, processed 225944 bytes in 247333 nsec
[   47.228105] crc32c: CRC_LE_BITS = 32
[   47.228721] crc32c: self tests passed, processed 225944 bytes in 173495 nsec
[   47.257215] crc32_combine: 8373 self tests passed
[   47.285548] crc32c_combine: 8373 self tests passed
[   47.287860] xz_dec_test: module loaded
[   47.288530] xz_dec_test: Create a device node with 'mknod xz_dec_test c 247 0' and write .xz files to it.
[   47.292292] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[   47.293545] glob: 64 self-tests passed, 0 failed
[   47.296212] no IO addresses supplied
[   47.297533] hgafb: HGA card not detected.
[   47.298253] hgafb: probe of hgafb.0 failed with error -22
[   47.299459] uvesafb: failed to execute /sbin/v86d
[   47.301232] uvesafb: make sure that the v86d helper is installed and executable
[   47.302515] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[   47.304142] uvesafb: vbe_init() failed with -22
[   47.305128] uvesafb: probe of uvesafb.0 failed with error -22
[   47.306380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   47.307964] ACPI: Power Button [PWRF]
[   47.309064] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   47.310457] ACPI: Power Button [PWRF]
[   47.356415] HDLC line discipline maxframe=4096
[   47.357425] N_HDLC line discipline registered.
[   47.358101] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   47.386161] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   47.388196] console [ttyS0] disabled
[    0.000000] Linux version 4.11.0-rc3-00006-ga83b576 (kbuild@lkp-hsx03) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP PREEMPT Thu Mar 23 03:46:34 CST 2017
[    0.000000] Command line: ip=::::vm-kbuild-yocto-x86_64-28::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-28/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a-20170323-129860-261i1-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-03230128 branch=linux-devel/devel-spot-201703230053 commit=a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/vmlinuz-4.11.0-rc3-00006-ga83b576 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 cons
[    0.000000] KERNEL supported cpus:
[    0.000000]   Centaur CentaurHauls
[    0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[    0.000000] CPU: Your system may be unstable.
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffddfff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffde000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffde max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6b90-0x000f6b9f] mapped at [ffff8800000f6b90]
[    0.000000]   mpc: f6ba0-f6c78
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x04741000, 0x04741fff] PGTABLE
[    0.000000] BRK [0x04742000, 0x04742fff] PGTABLE
[    0.000000] BRK [0x04743000, 0x04743fff] PGTABLE
[    0.000000] BRK [0x04744000, 0x04744fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1fb21000-0x1ffcffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F69B0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE18DC 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE17B8 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 001778 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: APIC 0x000000001FFE182C 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE18A4 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffddfff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1ffdb000-0x1ffddfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1ffda001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 164098250 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x000000001ffddfff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffddfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffddfff]
[    0.000000] On node 0 totalpages: 130940
[    0.000000]   DMA32 zone: 2048 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 130940 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 33 pages/cpu @ffff88001f800000 s106368 r0 d28800 u2097152
[    0.000000] pcpu-alloc: s106368 r0 d28800 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1f80c800
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 128871
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ip=::::vm-kbuild-yocto-x86_64-28::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-28/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a-20170323-129860-261i1-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-03230128 branch=linux-devel/devel-spot-201703230053 commit=a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/vmlinuz-4.11.0-rc3-00006-ga83b576 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,1152
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Memory: 453904K/523760K available (11895K kernel code, 1081K rwdata, 4116K rodata, 996K init, 36020K bss, 69856K reserved, 0K cma-reserved)
[    0.001000] Preemptible hierarchical RCU implementation.
[    0.001000] 	Build-time adjustment of leaf fanout to 64.
[    0.001000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[    0.001000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.001000] NR_IRQS:4352 nr_irqs:256 16
[    0.001000] console [ttyS0] enabled
[    0.001000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001000] ... MAX_LOCK_DEPTH:          48
[    0.001000] ... MAX_LOCKDEP_KEYS:        8191
[    0.001000] ... CLASSHASH_SIZE:          4096
[    0.001000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001000] ... CHAINHASH_SIZE:          32768
[    0.001000]  memory used by lock dependency info: 8127 kB
[    0.001000]  per task-struct memory footprint: 1920 bytes
[    0.001000] ------------------------
[    0.001000] | Locking API testsuite:
[    0.001000] ----------------------------------------------------------------------------
[    0.001000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.001000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]               recursive read-lock:             |  ok  |             |failed|
[    0.001000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.001000]             mixed read-write-lock:             |failed|             |failed|
[    0.001000]             mixed write-read-lock:             |failed|             |failed|
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.001000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.001000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.001000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.001000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.001000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.001000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.001000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.001000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.001000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.001000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.001000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.001000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.001000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.001000]       hard-irq read-recursion/123:  ok  |
[    0.001000]       soft-irq read-recursion/123:  ok  |
[    0.001000]       hard-irq read-recursion/132:  ok  |
[    0.001000]       soft-irq read-recursion/132:  ok  |
[    0.001000]       hard-irq read-recursion/213:  ok  |
[    0.001000]       soft-irq read-recursion/213:  ok  |
[    0.001000]       hard-irq read-recursion/231:  ok  |
[    0.001000]       soft-irq read-recursion/231:  ok  |
[    0.001000]       hard-irq read-recursion/312:  ok  |
[    0.001000]       soft-irq read-recursion/312:  ok  |
[    0.001000]       hard-irq read-recursion/321:  ok  |
[    0.001000]       soft-irq read-recursion/321:  ok  |
[    0.001000]   --------------------------------------------------------------------------
[    0.001000]   | Wound/wait tests |
[    0.001000]   ---------------------
[    0.001000]                   ww api failures:  ok  |  ok  |  ok  |
[    0.001000]                ww contexts mixing:failed|  ok  |
[    0.001000]              finishing ww context:  ok  |  ok  |  ok  |  ok  |
[    0.001000]                locking mismatches:  ok  |  ok  |  ok  |
[    0.001000]                  EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.001000]            spinlock nest unlocked:  ok  |
[    0.001000]   -----------------------------------------------------
[    0.001000]                                  |block | try  |context|
[    0.001000]   -----------------------------------------------------
[    0.001000]                           context:failed|  ok  |  ok  |
[    0.001000]                               try:failed|  ok  |failed|
[    0.001000]                             block:failed|  ok  |failed|
[    0.001000]                          spinlock:failed|  ok  |failed|
[    0.001000] --------------------------------------------------------
[    0.001000] 141 out of 253 testcases failed, as expected. |
[    0.001000] ----------------------------------------------------
[    0.001000] ODEBUG: selftest passed
[    0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.001000] hpet clockevent registered
[    0.001014] tsc: Detected 2693.506 MHz processor
[    0.002015] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693506)
[    0.003008] pid_max: default: 4096 minimum: 301
[    0.003806] ACPI: Core revision 20170119
[    0.008115] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.009117] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.010148] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.011077] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.012011] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.014065] mce: CPU supports 10 MCE banks
[    0.014978] mce: unknown CPU type - not enabling MCE support
[    0.015007] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.016006] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.029023] Freeing SMP alternatives memory: 40K
[    0.030708] smpboot: Max logical packages: 1
[    0.031077] enabled ExtINT on CPU#0
[    0.033430] ENABLING IO-APIC IRQs
[    0.034012] init IO_APIC IRQs
[    0.034560]  apic 0 pin 0 not connected
[    0.035024] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.036020] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.037000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.037000]  apic 0 pin 16 not connected
[    0.037000]  apic 0 pin 17 not connected
[    0.037000]  apic 0 pin 18 not connected
[    0.037000]  apic 0 pin 19 not connected
[    0.037000]  apic 0 pin 20 not connected
[    0.037000]  apic 0 pin 21 not connected
[    0.037000]  apic 0 pin 22 not connected
[    0.037000]  apic 0 pin 23 not connected
[    0.037000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.037000] TSC deadline timer enabled
[    0.037000] smpboot: CPU0: GenuineIntel Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1)
[    0.040019] Performance Events: no PMU driver, software events only.
[    0.049011] smp: Bringing up secondary CPUs ...
[    0.049848] smp: Brought up 1 node, 1 CPU
[    0.050011] ----------------
[    0.050522] | NMI testsuite:
[    0.051006] --------------------
[    0.051584]   remote IPI:  ok  |
[    0.052012]    local IPI:  ok  |
[    0.052583] --------------------
[    0.053007] Good, all   2 testcases passed! |
[    0.053801] ---------------------------------
[    0.054008] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[    0.055258] sched_clock: Marking stable (55000000, 0)->(479386774, -424386774)
[    0.056917] devtmpfs: initialized
[    0.058642] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.062368] futex hash table entries: 16 (order: -1, 2048 bytes)
[    0.063567] xor: automatically using best checksumming function   avx       
[    0.064952] NET: Registered protocol family 16
[    0.066624] workqueue: round-robin CPU selection forced, expect performance impact
[    0.069041] cpuidle: using governor menu
[    0.070129] ACPI: bus type PCI registered
[    0.070867] PCI: Using configuration type 1 for base access
[    0.089112] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.113089] raid6: sse2x1   gen()  4406 MB/s
[    0.132177] raid6: sse2x1   xor()  3330 MB/s
[    0.151269] raid6: sse2x2   gen()  6031 MB/s
[    0.170144] raid6: sse2x2   xor()  4156 MB/s
[    0.189222] raid6: sse2x4   gen()  7031 MB/s
[    0.208339] raid6: sse2x4   xor()  4755 MB/s
[    0.209176] raid6: using algorithm sse2x4 gen() 7031 MB/s
[    0.210160] raid6: .... xor() 4755 MB/s, rmw enabled
[    0.210960] raid6: using ssse3x2 recovery algorithm
[    0.211890] ACPI: Added _OSI(Module Device)
[    0.212659] ACPI: Added _OSI(Processor Device)
[    0.213493] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.214328] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219310] ACPI: Interpreter enabled
[    0.220024] ACPI: (supports S0 S4 S5)
[    0.222724] ACPI: Using IOAPIC for interrupt routing
[    0.223706] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.234763] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.235871] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.236953] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.238149] PCI host bridge to bus 0000:00
[    0.238816] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.240047] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.243287] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.244746] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    0.246061] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.247076] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.248854] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.250954] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.258481] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    0.275496] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.276763] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.277915] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.279112] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.280775] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.282368] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.283710] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.285742] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.292224] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.299316] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.320251] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.322270] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.325178] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.336086] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.354579] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.359101] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.366837] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.372742] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.384088] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe7fffff 64bit pref]
[    0.394184] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.396328] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    0.406412] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.407671] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.408871] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.412299] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.413537] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.414695] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.415880] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.417048] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.418499] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.419453] vgaarb: loaded
[    0.420526] SCSI subsystem initialized
[    0.422219] libata version 3.00 loaded.
[    0.422931] Linux cec interface: v0.10
[    0.423837] Linux video capture interface: v2.00
[    0.424631] pps_core: LinuxPPS API ver. 1 registered
[    0.425492] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.428243] FPGA manager framework
[    0.428815] PCI: Using ACPI for IRQ routing
[    0.429553] PCI: pci_cache_line_size set to 64 bytes
[    0.432750] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.433859] e820: reserve RAM buffer [mem 0x1ffde000-0x1fffffff]
[    0.435151] NET: Registered protocol family 23
[    0.436180] nfc: nfc_init: NFC Core ver 0.1
[    0.436948] NET: Registered protocol family 39
[    0.439154] clocksource: Switched to clocksource kvm-clock
[    0.440396] VFS: Disk quotas dquot_6.6.0
[    0.441067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.442255] FS-Cache: Loaded
[    0.442807] pnp: PnP ACPI init
[    0.445873] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.447069] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.448246] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.449363] pnp 00:03: [dma 2]
[    0.449956] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.451291] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.452620] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.453921] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.455704] pnp: PnP ACPI: found 7 devices
[    0.463911] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.465484] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.466569] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.467668] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.468910] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    0.470156] NET: Registered protocol family 1
[    0.470891] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.471856] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.472793] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.473845] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.475206] PCI: CLS 0 bytes, default 64
[    0.476013] Trying to unpack rootfs image as initramfs...
[    0.889187] Freeing initrd memory: 4796K
[    0.911475] AVX2 or AES-NI instructions are not detected.
[    0.912375] AVX2 instructions are not detected.
[    0.913194] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    0.915965] spin_lock-torture: Creating torture_shuffle task
[    0.916925] spin_lock-torture: Creating torture_stutter task
[    0.918017] spin_lock-torture: torture_shuffle task started
[    0.918943] spin_lock-torture: Creating lock_torture_writer task
[    0.919944] spin_lock-torture: torture_stutter task started
[    0.920850] spin_lock-torture: Creating lock_torture_writer task
[    0.921832] spin_lock-torture: lock_torture_writer task started
[    0.922800] spin_lock-torture: Creating lock_torture_stats task
[    0.923774] spin_lock-torture: lock_torture_writer task started
[    0.924826] spin_lock-torture: lock_torture_stats task started
[    1.949250] tsc: Refined TSC clocksource calibration: 2692.521 MHz
[    1.950363] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26cfa551cc3, max_idle_ns: 440795322428 ns
[   43.520166] torture_init_begin: Refusing rcu init: spin_lock running.
[   43.532633] torture_init_begin: One torture test at a time!
[   43.548863] workingset: timestamp_bits=40 max_order=17 bucket_order=0
[   43.552352] zbud: loaded
[   43.554761] JFS: nTxBlock = 3583, nTxLock = 28671
[   43.557080] SGI XFS with security attributes, debug enabled
[   43.562898] NILFS version 2 loaded
[   43.563506] ocfs2 stack glue: unable to register sysctl
[   43.565455] OCFS2 User DLM kernel interface loaded
[   43.572443] gfs2: GFS2 installed
[   43.586220] NET: Registered protocol family 38
[   43.587038] Key type asymmetric registered
[   43.588941] Asymmetric key parser 'x509' registered
[   43.589956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[   43.594942] io scheduler noop registered
[   43.595585] io scheduler deadline registered
[   43.596452] io scheduler cfq registered (default)
[   43.597240] io scheduler mq-deadline registered
[   43.598009] test_string_helpers: Running tests...
[   43.601658] test_firmware: interface ready
[   43.618536] test_hash: __hash_32() has no arch implementation to test.
[   43.621639] test_hash: hash_32() has no arch implementation to test.
[   43.622700] test_hash: hash_64() has no arch implementation to test.
[   43.625364] test_hash: 33152 tests passed.
[   43.626231] test_siphash: self-tests: pass
[   43.627025] Running rhashtable test nelem=8, max_size=0, shrinking=0
[   43.628024] Test 00:
[   43.633995]   Adding 50000 keys
[   43.697198]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   43.733226]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   43.734669]   Deleting 50000 keys
[   43.760511]   Duration of test: 125845886 ns
[   43.761458] Test 01:
[   43.764010]   Adding 50000 keys
[   43.825916]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   43.861872]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   43.863278]   Deleting 50000 keys
[   43.888982]   Duration of test: 124283716 ns
[   43.889870] Test 02:
[   43.892484]   Adding 50000 keys
[   43.968247]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   44.005877]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   44.007288]   Deleting 50000 keys
[   44.033468]   Duration of test: 140421914 ns
[   44.034388] Test 03:
[   44.036963]   Adding 50000 keys
[   44.100846]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   44.133357]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   44.134672]   Deleting 50000 keys
[   44.156287]   Duration of test: 118742627 ns
[   44.157089] Average test time: 127323535
[   44.157709] Testing concurrent rhashtable access from 10 threads
[   47.136052] Started 10 threads, 0 failed
[   47.143602] test_printf: all 260 tests passed
[   47.220726] test_bitmap: all 460506 tests passed
[   47.224394] test_uuid: all 18 tests passed
[   47.225673] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[   47.226611] crc32: self tests passed, processed 225944 bytes in 247333 nsec
[   47.228105] crc32c: CRC_LE_BITS = 32
[   47.228721] crc32c: self tests passed, processed 225944 bytes in 173495 nsec
[   47.257215] crc32_combine: 8373 self tests passed
[   47.285548] crc32c_combine: 8373 self tests passed
[   47.287860] xz_dec_test: module loaded
[   47.288530] xz_dec_test: Create a device node with 'mknod xz_dec_test c 247 0' and write .xz files to it.
[   47.292292] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[   47.293545] glob: 64 self-tests passed, 0 failed
[   47.296212] no IO addresses supplied
[   47.297533] hgafb: HGA card not detected.
[   47.298253] hgafb: probe of hgafb.0 failed with error -22
[   47.299459] uvesafb: failed to execute /sbin/v86d
[   47.301232] uvesafb: make sure that the v86d helper is installed and executable
[   47.302515] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[   47.304142] uvesafb: vbe_init() failed with -22
[   47.305128] uvesafb: probe of uvesafb.0 failed with error -22
[   47.306380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   47.307964] ACPI: Power Button [PWRF]
[   47.309064] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   47.310457] ACPI: Power Button [PWRF]
[   47.356415] HDLC line discipline maxframe=4096
[   47.357425] N_HDLC line discipline registered.
[   47.358101] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   47.386161] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   47.388196] console [ttyS0] disabled
[   47.415228] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   47.904645] console [ttyS0] enabled
[   47.931789] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   47.957570] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   47.961403] lp: driver loaded but no devices found
[   47.962347] Non-volatile memory driver v1.3
[   47.963350] telclk_interrupt = 0xf non-mcpbl0010 hw.
[   47.964304] smapi::smapi_init, ERROR invalid usSmapiID
[   47.965288] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[   47.966387] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[   47.967271] mwave: mwavedd::mwave_init: Error: Failed to initialize
[   47.967910] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[   47.971564] [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
[   47.973335] parport_pc 00:04: reported by Plug and Play ACPI
[   47.974159] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[   47.975281] lp0: using parport0 (interrupt-driven).
[   47.975876] parport_pc 00:04: reported by Plug and Play ACPI
[   47.976660] parport1: PC-style at 0x378, irq 7 [PCSPP(,...)]
[   47.977792] lp1: using parport1 (interrupt-driven).
[   48.006978] brd: module loaded
[   48.023048] loop: module loaded
[   48.063308] null: module loaded
[   48.063699] dummy-irq: no IRQ given.  Use irq=N
[   48.064254] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[   48.065517] c2port c2port0: C2 port uc added
[   48.066326] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[   48.067901] panel: panel driver not yet registered
[   48.068769] Uniform Multi-Platform E-IDE driver
[   48.070179] ide-gd driver 1.18
[   48.070845] ide-cd driver 5.00
[   48.072257] rdac: device handler registered
[   48.074034] hp_sw: device handler registered
[   48.074537] emc: device handler registered
[   48.074991] ppa: Version 2.07 (for Linux 2.4.x)
[   48.078096] imm: Version 2.05 (for Linux 2.4.0)
[   48.079831] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[   48.080674] osst :I: Tape driver with OnStream support version 0.99.4
[   48.080674] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   48.087041] scsi host0: scsi_debug: version 1.86 [20160430]
[   48.087041]   dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[   48.091800] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0186 PQ: 0 ANSI: 7
[   48.095810] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB)
[   48.098181] sd 0:0:0:0: [sda] Write Protect is off
[   48.098723] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[   48.101508] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   48.128682] sd 0:0:0:0: [sda] Attached SCSI disk
[   48.130830] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   48.132474] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   48.134256] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB)
[   48.136250] sd 0:0:0:0: [sda] Write Protect is off
[   48.136802] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[   48.139772] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   48.156050] sd 0:0:0:0: [sda] Attached SCSI disk
[   48.157371] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   48.161387] ------------[ cut here ]------------
[   48.162278] WARNING: CPU: 0 PID: 1 at block/blk-stat.c:237 blk_free_queue_stats+0x31/0x40
[   48.164083] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-00006-ga83b576 #1
[   48.165276] Call Trace:
[   48.165576]  dump_stack+0x63/0x89
[   48.165982]  __warn+0xd4/0xf0
[   48.166322]  warn_slowpath_null+0x18/0x20
[   48.166794]  blk_free_queue_stats+0x31/0x40
[   48.167524]  blk_release_queue+0x67/0x110
[   48.167994]  kobject_cleanup+0x43/0x80
[   48.168446]  ? scsi_device_cls_release+0x20/0x20
[   48.168982]  kobject_put+0x28/0x50
[   48.169415]  blk_put_queue+0x10/0x20
[   48.170169]  scsi_device_dev_release_usercontext+0x19d/0x200
[   48.171159]  ? scsi_device_cls_release+0x20/0x20
[   48.172067]  execute_in_process_context+0x86/0xa0
[   48.172682]  scsi_device_dev_release+0x17/0x20
[   48.173246]  device_release+0x38/0xa0
[   48.173681]  kobject_cleanup+0x43/0x80
[   48.174180]  kobject_put+0x28/0x50
[   48.174576]  put_device+0x12/0x20
[   48.174973]  __scsi_remove_device+0x89/0xd0
[   48.175526]  scsi_forget_host+0x5b/0x60
[   48.175954]  scsi_remove_host+0x74/0x110
[   48.176458]  sdebug_driver_remove+0x24/0xb0
[   48.177031]  driver_probe_device+0xd4/0x380
[   48.177687]  __device_attach_driver+0x81/0xb0
[   48.178458]  ? __driver_attach+0xb0/0xb0
[   48.179120]  bus_for_each_drv+0x58/0x90
[   48.179917]  __device_attach+0xc6/0x120
[   48.180568]  device_initial_probe+0xe/0x10
[   48.181109]  bus_probe_device+0x9e/0xb0
[   48.181579]  device_add+0x417/0x5e0
[   48.182087]  device_register+0x15/0x20
[   48.182537]  sdebug_add_adapter+0xf1/0x1e0
[   48.183029]  scsi_debug_init+0x724/0x7bb
[   48.183580]  ? scsi_register_interface+0x11/0x20
[   48.184407]  ? init_sg+0x9e/0xcb
[   48.185118]  ? init_sg+0xcb/0xcb
[   48.185646]  do_one_initcall+0x9a/0x178
[   48.186335]  ? parse_args+0x253/0x380
[   48.186942]  kernel_init_freeable+0x13c/0x1bd
[   48.187752]  ? set_debug_rodata+0x12/0x12
[   48.188472]  ? rest_init+0xc0/0xc0
[   48.189075]  kernel_init+0x9/0x100
[   48.189642]  ret_from_fork+0x2c/0x40
[   48.190387] ---[ end trace 80efe29bee05d63f ]---
[   48.194867] scsi host0: scsi_debug: version 1.86 [20160430]
[   48.194867]   dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[   48.199676] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0186 PQ: 0 ANSI: 7
[   48.207374] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB)
[   48.209733] sd 0:0:0:0: [sda] Write Protect is off
[   48.210729] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[   48.214797] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   48.239742] sd 0:0:0:0: [sda] Attached SCSI disk
[   48.240998] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   48.242790] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   48.244753] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB)
[   48.247170] sd 0:0:0:0: [sda] Write Protect is off
[   48.247956] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[   48.249218] MACsec IEEE 802.1AE
[   48.250063] vcan: Virtual CAN interface driver
[   48.250823] slcan: serial line CAN interface driver
[   48.251640] slcan: 10 dynamic interface channels.
[   48.252487] CAN device driver interface
[   48.253244] sja1000 CAN netdevice driver
[   48.253994] sja1000_isa: insufficient parameters supplied
[   48.254901] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   48.256432] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   48.257578] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   48.278453] sd 0:0:0:0: [sda] Attached SCSI disk
[   48.421571] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   48.772059] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[   48.772919] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[   49.634512] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[   49.635675] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[   49.639007] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   49.640007] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   49.641252] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[   49.642373] igb: Copyright (c) 2007-2014 Intel Corporation.
[   49.647656] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.0.0-k
[   49.648957] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[   49.656244] aoe: AoE v85 initialised.
[   49.659622] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   49.673439] serio: i8042 KBD port at 0x60,0x64 irq 1
[   49.675822] serio: i8042 AUX port at 0x60,0x64 irq 12
[   49.682841] mousedev: PS/2 mouse device common for all mice
[   49.691091] evbug: Connected device: input1 (Power Button at LNXPWRBN/button/input0)
[   49.700057] mk712: device not present
[   49.705378] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[   49.706466] evbug: Connected device: input2 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[   49.714979] evbug: Disconnected device: input2
[   49.715616] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[   49.718083] evbug: Connected device: input3 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[   49.726856] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[   49.728078] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   49.729365] evbug: Connected device: input5 (PC Speaker at isa0061/input0)
[   49.730654] evbug: Disconnected device: input5
[   49.731987] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   49.733341] evbug: Connected device: input6 (PC Speaker at isa0061/input0)
[   49.734795] i2c-parport: adapter type unspecified
[   49.735396] i2c-parport-light: adapter type unspecified
[   49.737199] pps pps0: new PPS source ktimer
[   49.737908] pps pps0: ktimer PPS source registered
[   49.738855] pps_ldisc: PPS line discipline registered
[   49.739737] pps_parport: parallel port PPS client
[   49.740566] parport1: cannot grant exclusive access for device pps_parport
[   49.741791] pps_parport: couldn't register with parport1
[   49.742996] Driver for 1-wire Dallas network protocol.
[   49.743762] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[   49.745440] applesmc: supported laptop not found!
[   49.746237] applesmc: driver init failed (ret=-19)!
[   49.748376] pc87360: PC8736x not detected, module not inserted
[   49.749518] sch56xx_common: Unsupported device id: 0xff
[   49.750351] sch56xx_common: Unsupported device id: 0xff
[   49.751830] acquirewdt: WDT driver for Acquire single board computer initialising
[   49.753383] acquirewdt: I/O address 0x0043 already in use
[   49.754312] acquirewdt: probe of acquirewdt failed with error -5
[   49.755373] advantechwdt: WDT driver for Advantech single board computer initialising
[   49.756518] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[   49.757574] ib700wdt: WDT driver for IB700 single board computer initialising
[   49.758830] ib700wdt: START method I/O 443 is not available
[   49.759731] ib700wdt: probe of ib700wdt failed with error -5
[   49.760937] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[   49.762176] wafer5823wdt: I/O address 0x0443 already in use
[   49.763167] it87_wdt: no device
[   49.763680] pc87413_wdt: Version 1.1 at io 0x2E
[   49.764542] pc87413_wdt: cannot register miscdev on minor=130 (err=-16)
[   49.765504] sbc60xxwdt: I/O address 0x0443 already in use
[   49.766432] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[   49.768932] smsc37b787_wdt: Unable to register miscdev on minor 130
[   49.770063] w83977f_wdt: driver v1.00
[   49.770714] w83977f_wdt: cannot register miscdev on minor=130 (err=-16)
[   49.771685] machzwd: MachZ ZF-Logic Watchdog driver initializing
[   49.772496] machzwd: no ZF-Logic found
[   49.773175] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16)
[   49.783597] ISDN subsystem Rev: 1.1.2.3/
[   49.783601] 1.1.2.2/
[   49.784293] none/
[   49.784674] 1.1.2.2/
[   49.785000] 1.1.2.2
[   49.785414] 
[   49.786419] CAPI 2.0 started up with major 68 (no middleware)
[   49.787415] Modular ISDN core version 1.1.29
[   49.788867] NET: Registered protocol family 34
[   49.789649] DSP module 2.0
[   49.790108] mISDN_dsp: DSP clocks every 64 samples. This equals 8 jiffies.
[   49.792269] mISDN: Layer-1-over-IP driver Rev. 2.00
[   49.793219] 0 virtual devices registered
[   49.793863] dss1_divert module successfully installed
[   49.794744] HiSax: Linux Driver for passive ISDN cards
[   49.795627] HiSax: Version 3.5 (kernel)
[   49.796243] HiSax: Layer1 Revision 2.46.2.5
[   49.796852] HiSax: Layer2 Revision 2.30.2.4
[   49.797541] HiSax: TeiMgr Revision 2.20.2.3
[   49.798046] HiSax: Layer3 Revision 2.22.2.3
[   49.798746] HiSax: LinkLayer Revision 2.59.2.4
[   49.799547] HiSax: Total 1 card defined
[   49.800350] HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
[   49.801303] Gazel: Driver Revision 2.19.2.4
[   49.801923] Gazel: ISA PnP card automatic recognition
[   49.802827] Gazel: Card ISA R647/R648 found
[   49.803546] Gazel: config irq:15 isac:0x8180  cfg:0xC180
[   49.804434] Gazel: hscx A:0x180  hscx B:0x4180
[   49.818217] Gazel: ISAC version (ff): 2085 V2.3
[   49.818901] Gazel: HSCX version A: ???  B: ???
[   49.819525] Gazel: wrong HSCX versions check IO address
[   49.820522] HiSax: Card Gazel not installed !
[   49.821295] HFC-4S/8S: Layer 1 driver module for HFC-4S/8S isdn chips, Revision: 1.10
[   49.822617] HFC-4S/8S: (C) 2003 Cornelius Consult, www.cornelius-consult.de
[   49.823756] HFC-4S/8S: found 0 cards
[   49.826911] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   49.828108] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   49.832691] fw_cfg: probe of QEMU0002:00 failed with error -16
[   49.834348] hidraw: raw HID events driver (C) Jiri Kosina
[   49.836575] greybus: registered new driver hid
[   49.837357] greybus: registered new driver log
[   49.838055] greybus: registered new driver loopback
[   49.838832] greybus: registered new driver power_supply
[   49.840549] greybus: registered new driver vibrator
[   49.841419] greybus: registered new driver gbphy
[   49.842214] hdaps: supported laptop not found!
[   49.842908] hdaps: driver init failed (ret=-19)!
[   49.843784] cros_ec_lpc: unsupported system.
[   49.847947] NET: Registered protocol family 26
[   49.848682] GACT probability on
[   49.849436] Mirror/redirect action on
[   49.850557] netem: version 1.3
[   49.851102] u32 classifier
[   49.851571]     Performance counters on
[   49.852062]     input device check on
[   49.852581]     Actions configured
[   49.853072] NET: Registered protocol family 15
[   49.853731] NET: Registered protocol family 4
[   49.854441] NET: Registered protocol family 9
[   49.855114] X25: Linux Version 0.2
[   49.855714] can: controller area network core (rev 20120528 abi 9)
[   49.856729] NET: Registered protocol family 29
[   49.857375] can: raw protocol (rev 20120528)
[   49.858051] can: broadcast manager protocol (rev 20161123 t)
[   49.858947] can: netlink gateway (rev 20130117) max_hops=1
[   49.860244] IrCOMM protocol (Dag Brattli)
[   49.864829] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[   49.866135] DECnet: Routing cache hash table of 512 buckets, 32Kbytes
[   49.867260] NET: Registered protocol family 12
[   49.868023] 9pnet: Installing 9P2000 support
[   49.868853] NET: Registered protocol family 37
[   49.869707] Key type dns_resolver registered
[   49.870397] mce: Unable to init device /dev/mcelog (rc: -5)
[   49.872200] ... APIC ID:      00000000 (0)
[   49.872921] ... APIC VERSION: 01050014
[   49.873560] 0000000000000000000000000000000000000000000000000000000000000000
[   49.874653] 0000000000000000000000000000000000000000000000000000000000000000
[   49.875849] 0000000000000000000000000000000000000000000000000000000000008000
[   49.877183] number of MP IRQ sources: 15.
[   49.877896] number of IO-APIC #0 registers: 24.
[   49.878711] testing the IO APIC.......................
[   49.879600] IO APIC #0......
[   49.880057] .... register #00: 00000000
[   49.880793] .......    : physical APIC id: 00
[   49.881568] .......    : Delivery Type: 0
[   49.882231] .......    : LTS          : 0
[   49.882833] .... register #01: 00170011
[   49.883460] .......     : max redirection entries: 17
[   49.884277] .......     : PRQ implemented: 0
[   49.885008] .......     : IO APIC version: 11
[   49.885764] .... register #02: 00000000
[   49.886373] .......     : arbitration: 00
[   49.887015] .... IRQ redirection table:
[   49.887702] IOAPIC 0:
[   49.888083]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   49.889395]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[   49.890742]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[   49.892047]  pin03, disabled, edge , high, V(33), IRR(0), S(0), logical , D(01), M(1)
[   49.893377]  pin04, disabled, edge , high, V(34), IRR(0), S(0), logical , D(01), M(1)
[   49.894612]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(01), M(1)
[   49.895945]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(01), M(1)
[   49.897254]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[   49.898502]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(01), M(1)
[   49.899805]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[   49.901168]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(01), M(1)
[   49.902411]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(01), M(1)
[   49.903727]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[   49.905007]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(01), M(1)
[   49.906280]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[   49.907569]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[   49.908972]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   49.910296]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   49.911494]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   49.912820]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   49.914103]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   49.915444]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   49.916713]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   49.917994]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   49.919292] IRQ to pin mappings:
[   49.919848] IRQ0 -> 0:2
[   49.920384] IRQ1 -> 0:1
[   49.920811] IRQ3 -> 0:3
[   49.921255] IRQ4 -> 0:4
[   49.921676] IRQ5 -> 0:5
[   49.922102] IRQ6 -> 0:6
[   49.922543] IRQ7 -> 0:7
[   49.922971] IRQ8 -> 0:8
[   49.923443] IRQ9 -> 0:9
[   49.923864] IRQ10 -> 0:10
[   49.924304] IRQ11 -> 0:11
[   49.924776] IRQ12 -> 0:12
[   49.925239] IRQ13 -> 0:13
[   49.925699] IRQ14 -> 0:14
[   49.926105] IRQ15 -> 0:15
[   49.926565] .................................... done.
[   49.929090] registered taskstats version 1
[   49.931886] Btrfs loaded, crc32c=crc32c-intel, integrity-checker=on
[   49.933913] Key type trusted registered
[   49.936975] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[   49.938903] console [netcon0] enabled
[   49.939775] netconsole: network logging started
[   49.940821] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   49.941868] EDD information not available.
[   49.945810] Freeing unused kernel memory: 996K
[   49.946632] Write protecting the kernel read-only data: 18432k
[   49.948633] Freeing unused kernel memory: 380K
[   49.958342] Freeing unused kernel memory: 2028K
[   49.965497] process 273 (init) attempted a POSIX timer syscall while CONFIG_POSIX_TIMERS is not set
/etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: not found

Please wait: booting...
[   49.998689] gfs2: path_lookup on /dev/root returned error -2
Starting udev
[   50.060827] udevd[299]: starting version 3.1.5
[   50.062131] random: udevd: uninitialized urandom read (16 bytes read)
[   50.063345] random: udevd: uninitialized urandom read (16 bytes read)
[   50.064837] random: udevd: uninitialized urandom read (16 bytes read)
[   50.066095] random: udevd: uninitialized urandom read (16 bytes read)
[   50.254461] random: udevd: uninitialized urandom read (16 bytes read)
[   50.255716] random: udevd: uninitialized urandom read (16 bytes read)
[   50.292902] random: udevd: uninitialized urandom read (16 bytes read)
[   50.368803] elevator: switch to noop failed
[   50.400922] elevator: switch to noop failed
[   50.402540] elevator: switch to noop failed
[   50.403074] elevator: switch to noop failed
[   50.403444] elevator: switch to noop failed
[   50.409671] elevator: switch to noop failed
[   50.410666] elevator: switch to noop failed
[   50.411460] elevator: switch to noop failed
[   50.412589] elevator: switch to noop failed
[   50.413185] elevator: switch to noop failed
[   50.413982] elevator: switch to noop failed
[   50.414546] elevator: switch to noop failed
[   50.415285] elevator: switch to noop failed
[   50.415630] elevator: switch to noop failed
[   50.416980] elevator: switch to noop failed
[   50.417432] elevator: switch to noop failed
[   50.418012] elevator: switch to noop failed
[   50.418500] elevator: switch to noop failed
[   50.425827] elevator: switch to noop failed
[   51.127418] random: dd: uninitialized urandom read (512 bytes read)
Poky (Yocto Project Reference Distro) 2.1 qemux86-64 /dev/ttyS0
[  123.997194] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  185.437187] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  246.877195] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  308.317179] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  369.757210] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  431.197206] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  492.637207] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  554.077183] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  615.517183] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  676.957179] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  738.397184] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  799.837198] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  861.277180] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  922.717174] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  984.157206] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[ 1045.597177] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[ 1107.037184] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[ 1168.477189] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[ 1229.917177] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[ 1291.357391] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[ 1352.797183] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[ 1414.237187] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[ 1475.677191] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[ 1537.117194] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 

Elapsed time: 1530
BUG: kernel hang in test stage

initrds=(
	/osimage/yocto/yocto-minimal-x86_64-2016-04-22.cgz
	/lkp/scheduled/vm-kbuild-yocto-x86_64-28/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a-20170323-129860-261i1-0.cgz
	/lkp/lkp/lkp-x86_64.cgz
)

cat "${initrds[@]}" > /fs/sdd1/initrd-vm-kbuild-yocto-x86_64-28

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-cpu SandyBridge
	-kernel /pkg/linux/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/vmlinuz-4.11.0-rc3-00006-ga83b576
	-initrd /fs/sdd1/initrd-vm-kbuild-yocto-x86_64-28
	-m 512
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-drive file=/fs/sdd1/disk0-vm-kbuild-yocto-x86_64-28,media=disk,if=virtio
	-pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-x86_64-28
	-serial file:/dev/shm/kboot/vm-kbuild-yocto-x86_64-28/serial
	-serial file:/dev/shm/kboot/vm-kbuild-yocto-x86_64-28/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-kbuild-yocto-x86_64-28::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-kbuild-yocto-x86_64-28/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a-20170323-129860-261i1-0.yaml
	ARCH=x86_64
	kconfig=x86_64-randconfig-n0-03230128
	branch=linux-devel/devel-spot-201703230053
	commit=a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a
	BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/vmlinuz-4.11.0-rc3-00006-ga83b576
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-n0-03230128/gcc-4.8/a83b576c9c25cf771fb0b15ec5eb2e7510ec2f5a/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
