[RESEND PATCH v2 21/53] mtd: nand: denali: move multi device fixup code to a helper function

[Masahiro Yamada]

Collect multi NAND fixups into a helper function instead of
scattering them in denali_init().

I am rewording the comment block to clearly explain what is called
"multi device".

Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---

Changes in v2:
  - Reword the comment block for clarification

 drivers/mtd/nand/denali.c | 54 +++++++++++++++++++++++++++++------------------
 1 file changed, 33 insertions(+), 21 deletions(-)

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 1706975..4e63d57 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1458,6 +1458,36 @@ static void denali_drv_init(struct denali_nand_info 
*denali)
        denali->irq_status = 0;
 }
 
+static void denali_multidev_fixup(struct denali_nand_info *denali)
+{
+       struct nand_chip *chip = &denali->nand;
+       struct mtd_info *mtd = nand_to_mtd(chip);
+
+       /*
+        * Support for multi device:
+        * When the IP configuration is x16 capable and two x8 chips are
+        * connected in parallel, DEVICES_CONNECTED should be set to 2.
+        * In this case, the core framework knows nothing about this fact,
+        * so we should tell it the _logical_ pagesize and anything necessary.
+        */
+       denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+
+       mtd->size <<= denali->devnum - 1;
+       mtd->erasesize <<= denali->devnum - 1;
+       mtd->writesize <<= denali->devnum - 1;
+       mtd->oobsize <<= denali->devnum - 1;
+       chip->chipsize <<= denali->devnum - 1;
+       chip->page_shift += denali->devnum - 1;
+       chip->phys_erase_shift += denali->devnum - 1;
+       chip->bbt_erase_shift += denali->devnum - 1;
+       chip->chip_shift += denali->devnum - 1;
+       chip->pagemask <<= denali->devnum - 1;
+       chip->ecc.size *= denali->devnum;
+       chip->ecc.bytes *= denali->devnum;
+       chip->ecc.strength *= denali->devnum;
+       denali->bbtskipbytes *= denali->devnum;
+}
+
 int denali_init(struct denali_nand_info *denali)
 {
        struct nand_chip *chip = &denali->nand;
@@ -1540,24 +1570,6 @@ int denali_init(struct denali_nand_info *denali)
        }
 
        /*
-        * support for multi nand
-        * MTD known nothing about multi nand, so we should tell it
-        * the real pagesize and anything necessery
-        */
-       denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
-       chip->chipsize <<= denali->devnum - 1;
-       chip->page_shift += denali->devnum - 1;
-       chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
-       chip->bbt_erase_shift += denali->devnum - 1;
-       chip->phys_erase_shift = chip->bbt_erase_shift;
-       chip->chip_shift += denali->devnum - 1;
-       mtd->writesize <<= denali->devnum - 1;
-       mtd->oobsize <<= denali->devnum - 1;
-       mtd->erasesize <<= denali->devnum - 1;
-       mtd->size = chip->numchips * chip->chipsize;
-       denali->bbtskipbytes *= denali->devnum;
-
-       /*
         * second stage of the NAND scan
         * this stage requires information regarding ECC and
         * bad block management.
@@ -1600,11 +1612,9 @@ int denali_init(struct denali_nand_info *denali)
        }
 
        mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
-       chip->ecc.bytes *= denali->devnum;
-       chip->ecc.strength *= denali->devnum;
 
        /* override the default read operations */
-       chip->ecc.size = ECC_SECTOR_SIZE * denali->devnum;
+       chip->ecc.size = ECC_SECTOR_SIZE;
        chip->ecc.read_page = denali_read_page;
        chip->ecc.read_page_raw = denali_read_page_raw;
        chip->ecc.write_page = denali_write_page;
@@ -1613,6 +1623,8 @@ int denali_init(struct denali_nand_info *denali)
        chip->ecc.write_oob = denali_write_oob;
        chip->erase = denali_erase;
 
+       denali_multidev_fixup(denali);
+
        ret = nand_scan_tail(mtd);
        if (ret)
                goto failed_req_irq;
-- 
2.7.4