When I configure 'CPU Idle PM Support' on my HP dv2125nr notebook with a Turion X64 X2 processor and X86_64 architecture selected, the computer freezes on bootup. I have included a portion the configuration file and part of /var/log/boot.msg for my working system. Please let me know if further info from my system is required. I would be happy to test any patches, etc.
Larry ============================================================== The console log ends with the following entries: ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) cpuidle: driver acpi_idle failed to attach to cpu 0 cpuidle: driver acpi_idle failed to attach to cpu 0 cpuidle: using driver acpi_idle Loading thermal At this point, the system hangs. ================================================= The beginning section of my .config is as follows: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.21-rc4-mm1 # Wed Mar 21 13:05:07 2007 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ZONE_DMA32=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_DMI=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="-mm1" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SWAP_PREFETCH=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y # CONFIG_TASK_XACCT is not set # CONFIG_UTS_NS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set CONFIG_PAGE_GROUP_BY_MOBILITY=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Process debugging support # CONFIG_UTRACE=y CONFIG_PTRACE=y # # Block layer # CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set CONFIG_MK8=y # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y CONFIG_SMP=y CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_BKL is not set # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_ADAPTIVE_READAHEAD=y # CONFIG_DEBUG_READAHEAD is not set CONFIG_NR_CPUS=128 CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_REORDER is not set CONFIG_K8_NB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_GENERIC_PENDING_IRQ=y # # Power management options # CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set CONFIG_SOFTWARE_SUSPEND=y CONFIG_PM_STD_PARTITION="" CONFIG_SUSPEND_SMP=y # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_SLEEP_PROC_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=m # CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=m CONFIG_ACPI_SBS=m # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=m # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=m CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m # # CPUFreq processor drivers # CONFIG_X86_POWERNOW_K8=m CONFIG_X86_POWERNOW_K8_ACPI=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_ACPI_CPUFREQ=m # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # # CPU idle PM support # CONFIG_CPU_IDLE=y # # Governors # CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) # ... ================================================================= A listing of /var/log/boot.msg (from my running system) to the point at which it fails when cpuidle is loaded is as follows: Inspecting /boot/System.map-2.6.21-rc3-L2.6-g61ae474e-dirty Loaded 23859 symbols from /boot/System.map-2.6.21-rc3-L2.6-g61ae474e-dirty. Symbols match kernel version 2.6.21. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.21-rc3-L2.6-g61ae474e-dirty ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #2 SMP Mon Mar 12 14:51:06 CDT 2007 <6>Command line: root=/dev/sda3 vga=0x317 resume=/dev/sda2 splash=silent <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) <4> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000005bf10000 (usable) <4> BIOS-e820: 000000005bf10000 - 000000005bf19000 (ACPI data) <4> BIOS-e820: 000000005bf19000 - 000000005bf80000 (ACPI NVS) <4> BIOS-e820: 000000005bf80000 - 0000000060000000 (reserved) <4> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) <7>Entering add_active_range(0, 0, 157) 0 entries of 256 used <7>Entering add_active_range(0, 256, 376592) 1 entries of 256 used <4>end_pfn_map = 1048576 <6>DMI present. <4>ACPI: RSDP 000F87C0, 0014 (r0 HP ) <4>ACPI: RSDT 5BF131F0, 0038 (r1 HP 30B5 6040000 LTP 0) <4>ACPI: FACP 5BF18D52, 0074 (r1 HP 30B5 6040000 PTL_ F4240) <4>ACPI: DSDT 5BF13228, 5B2A (r1 HP 30B5 6040000 MSFT 100000E) <4>ACPI: FACS 5BF19FC0, 0040 <4>ACPI: MCFG 5BF18DC6, 003C (r1 HP 30B5 6040000 LTP 0) <4>ACPI: APIC 5BF18E02, 0054 (r1 HP 30B5 6040000 LTP 0) <4>ACPI: BOOT 5BF18E56, 0028 (r1 HP 30B5 6040000 LTP 1) <4>ACPI: SSDT 5BF18E7E, 0182 (r1 HP 30B5 6040000 LTP 1) <7>Entering add_active_range(0, 0, 157) 0 entries of 256 used <7>Entering add_active_range(0, 256, 376592) 1 entries of 256 used <4>Zone PFN ranges: <4> DMA 0 -> 4096 <4> DMA32 4096 -> 1048576 <4> Normal 1048576 -> 1048576 <4>early_node_map[2] active PFN ranges <4> 0: 0 -> 157 <4> 0: 256 -> 376592 <7>On node 0 totalpages: 376493 <7> DMA zone: 88 pages used for memmap <7> DMA zone: 2241 pages reserved <7> DMA zone: 1668 pages, LIFO batch:0 <7> DMA32 zone: 8002 pages used for memmap <7> DMA32 zone: 364494 pages, LIFO batch:31 <7> Normal zone: 0 pages used for memmap <6>ACPI: PM-Timer IO Port: 0x1008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <6>Processor #0 (Bootup-CPU) <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) <6>Processor #1 <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <6>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 <7>ACPI: IRQ9 used by override. <6>Setting APIC routing to physical flat <6>Using ACPI (MADT) for SMP configuration information <4>Nosave address range: 000000000009d000 - 000000000009e000 <4>Nosave address range: 000000000009e000 - 00000000000a0000 <4>Nosave address range: 00000000000a0000 - 00000000000d2000 <4>Nosave address range: 00000000000d2000 - 0000000000100000 <6>Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) <6>SMP: Allowing 2 CPUs, 0 hotplug CPUs <6>PERCPU: Allocating 49728 bytes of per cpu data <4>Built 1 zonelists. Total pages: 366162 <5>Kernel command line: root=/dev/sda3 vga=0x317 resume=/dev/sda2 splash=silent <4>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 32768 bytes) <6>time.c: Detected 1607.353 MHz processor. <4>Console: colour dummy device 80x25 <4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>... MAX_LOCKDEP_SUBCLASSES: 8 <4>... MAX_LOCK_DEPTH: 30 <4>... MAX_LOCKDEP_KEYS: 2048 <4>... CLASSHASH_SIZE: 1024 <4>... MAX_LOCKDEP_ENTRIES: 8192 <4>... MAX_LOCKDEP_CHAINS: 16384 <4>... CHAINHASH_SIZE: 8192 <4> memory used by lock dependency info: 1648 kB <4> per task-struct memory footprint: 1680 bytes <4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) <4>Checking aperture... <4>CPU 0: aperture @ 8492000000 size 32 MB <4>Aperture too small (32 MB) <4>No AGP bridge found <4>Memory: 1457524k/1506368k available (1886k kernel code, 48008k reserved, 1205k data, 220k init) <4>Calibrating delay using timer specific routine.. 3218.55 BogoMIPS (lpj=6437119) <4>Mount-cache hash table entries: 256 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 0 <4>lockdep: not fixing up alternatives. <6>ACPI: Core revision 20070126 <6>Using local APIC timer interrupts. <4>result 12557461 <6>Detected 12.557 MHz APIC timer. <4>lockdep: not fixing up alternatives. <6>Booting processor 1/2 APIC 0x1 <4>Initializing CPU#1 <4>Calibrating delay using timer specific routine.. 3214.91 BogoMIPS (lpj=6429832) <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <6>CPU: Physical Processor ID: 0 <6>CPU: Processor Core ID: 1 <4>AMD Turion(tm) 64 X2 stepping 02 <6>Brought up 2 CPUs <6>testing NMI watchdog ... OK. <4>migration_cost=163 <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: Using MMCONFIG at e0000000 - e02fffff <5>PCI: No mmconfig possible on device 00:18 <5>PCI: No mmconfig possible on device 03:09 <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S3 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <7>PCI: Scanning bus 0000:00 <7>PCI: Found 0000:00:00.0 [10de/02f0] 000500 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:00.0 <7>PCI: Found 0000:00:00.1 [10de/02fa] 000500 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:00.1 <7>PCI: Found 0000:00:00.2 [10de/02fe] 000500 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:00.2 <7>PCI: Found 0000:00:00.3 [10de/02f8] 000500 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:00.3 <7>PCI: Found 0000:00:00.4 [10de/02f9] 000500 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:00.4 <7>PCI: Found 0000:00:00.5 [10de/02ff] 000500 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:00.5 <7>PCI: Found 0000:00:00.6 [10de/027f] 000500 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:00.6 <7>PCI: Found 0000:00:00.7 [10de/027e] 000500 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:00.7 <7>PCI: Found 0000:00:02.0 [10de/02fc] 000604 01 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:02.0 <7>PCI: Found 0000:00:03.0 [10de/02fd] 000604 01 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:03.0 <7>PCI: Found 0000:00:05.0 [10de/0244] 000300 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:05.0 <7>Boot video device is 0000:00:05.0 <7>PCI: Found 0000:00:09.0 [10de/0270] 000500 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:09.0 <7>PCI: Found 0000:00:0a.0 [10de/0260] 000601 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:0a.0 <7>PCI: Found 0000:00:0a.1 [10de/0264] 000c05 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:0a.1 <7>PCI: Found 0000:00:0a.3 [10de/0271] 000b40 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:0a.3 <7>PCI: Found 0000:00:0b.0 [10de/026d] 000c03 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:0b.0 <7>PCI: Found 0000:00:0b.1 [10de/026e] 000c03 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:0b.1 <7>PCI: Found 0000:00:0d.0 [10de/0265] 000101 00 <4>0000:00:0d.0: cannot adjust BAR0 (not I/O) <4>0000:00:0d.0: cannot adjust BAR1 (not I/O) <4>0000:00:0d.0: cannot adjust BAR2 (not I/O) <4>0000:00:0d.0: cannot adjust BAR3 (not I/O) <7>PCI: Calling quirk ffffffff8037061c for 0000:00:0d.0 <7>PCI: Found 0000:00:0e.0 [10de/0266] 000101 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:0e.0 <7>PCI: Found 0000:00:10.0 [10de/026f] 000604 01 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:10.0 <7>PCI: Found 0000:00:10.1 [10de/026c] 000403 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:10.1 <7>PCI: Found 0000:00:14.0 [10de/0269] 000680 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:14.0 <7>PCI: Found 0000:00:18.0 [1022/1100] 000600 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:18.0 <7>PCI: Found 0000:00:18.1 [1022/1101] 000600 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:18.1 <7>PCI: Found 0000:00:18.2 [1022/1102] 000600 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:18.2 <7>PCI: Found 0000:00:18.3 [1022/1103] 000600 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:00:18.3 <7>PCI: Fixups for bus 0000:00 <7>PCI: Scanning behind PCI bridge 0000:00:02.0, config 010100, pass 0 <7>PCI: Scanning bus 0000:01 <7>PCI: Found 0000:01:00.0 [14e4/4311] 000280 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:01:00.0 <7>PCI: Fixups for bus 0000:01 <7>PCI: Bus scan for 0000:01 returning with max=01 <7>PCI: Scanning behind PCI bridge 0000:00:03.0, config 020200, pass 0 <7>PCI: Scanning bus 0000:02 <7>PCI: Fixups for bus 0000:02 <7>PCI: Bus scan for 0000:02 returning with max=02 <7>PCI: Scanning behind PCI bridge 0000:00:10.0, config 030300, pass 0 <7>PCI: Scanning bus 0000:03 <7>PCI: Found 0000:03:09.0 [1180/0832] 000c00 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:03:09.0 <7>PCI: Found 0000:03:09.1 [1180/0822] 000805 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:03:09.1 <7>PCI: Found 0000:03:09.2 [1180/0843] 000880 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:03:09.2 <7>PCI: Found 0000:03:09.3 [1180/0592] 000880 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:03:09.3 <7>PCI: Found 0000:03:09.4 [1180/0852] 000880 00 <7>PCI: Calling quirk ffffffff8037061c for 0000:03:09.4 <7>PCI: Fixups for bus 0000:03 <6>PCI: Transparent bridge - 0000:00:10.0 <7>PCI: Bus scan for 0000:03 returning with max=03 <7>PCI: Scanning behind PCI bridge 0000:00:02.0, config 010100, pass 1 <7>PCI: Scanning behind PCI bridge 0000:00:03.0, config 020200, pass 1 <7>PCI: Scanning behind PCI bridge 0000:00:10.0, config 030300, pass 1 <7>PCI: Bus scan for 0000:00 returning with max=03 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] <4>ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. <4>ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *10 <4>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15) <4>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled. <4>ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *10 <4>ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10 <4>ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. <4>ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10 <4>ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 19 20 21 22 23) *11 <4>ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11 <4>ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7 <4>ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11 <4>ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. <4>ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. <4>ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. <4>ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. <4>ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5 <4>ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0 <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <7>pnp: ACPI device : hid PNP0C01 <7>pnp: ACPI device : hid PNP0A03 <7>pnp: ACPI device : hid PNP0C02 <7>pnp: ACPI device : hid PNP0C02 <7>pnp: ACPI device : hid PNP0C02 <7>pnp: ACPI device : hid PNP0200 <7>pnp: ACPI device : hid PNP0800 <7>pnp: ACPI device : hid PNP0B00 <7>pnp: ACPI device : hid PNP0C04 <7>pnp: ACPI device : hid PNP0303 <7>pnp: ACPI device : hid SYN0127 <6>pnp: PnP ACPI: found 11 devices <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <7>pnp: the driver 'system' has been registered <7>pnp: match found with the PnP device '00:00' and the driver 'system' <6>pnp: 00:00: iomem range 0xffc00000-0xffffffff has been reserved <6>pnp: 00:00: iomem range 0xfec00000-0xfec00fff has been reserved <6>pnp: 00:00: iomem range 0xfee00000-0xfeefffff has been reserved <6>pnp: 00:00: iomem range 0x0-0x0 could not be reserved <7>pnp: match found with the PnP device '00:02' and the driver 'system' <6>pnp: 00:02: iomem range 0xe0000000-0xefffffff has been reserved <7>pnp: match found with the PnP device '00:03' and the driver 'system' <6>pnp: 00:03: ioport range 0x1000-0x107f has been reserved <6>pnp: 00:03: ioport range 0x1080-0x10ff has been reserved <6>pnp: 00:03: ioport range 0x1400-0x147f has been reserved <6>pnp: 00:03: ioport range 0x1480-0x14ff has been reserved <6>pnp: 00:03: ioport range 0x1800-0x187f has been reserved <6>pnp: 00:03: ioport range 0x1880-0x18ff has been reserved <6>pnp: 00:03: ioport range 0x2000-0x203f has been reserved <7>pnp: match found with the PnP device '00:04' and the driver 'system' <6>Time: tsc clocksource has been installed. <7> got res [68000000:6801ffff] bus [68000000:6801ffff] flags 7202 for BAR 6 of 0000:00:05.0 <6>PCI: Bridge: 0000:00:02.0 <6> IO window: disabled. <6> MEM window: c3000000-c30fffff <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:03.0 <6> IO window: 4000-4fff <6> MEM window: c8000000-c87fffff <6> PREFETCH window: disabled. <6>PCI: Bridge: 0000:00:10.0 <6> IO window: disabled. <6> MEM window: c3100000-c31fffff <6> PREFETCH window: disabled. <7>PCI: Setting latency timer of device 0000:00:02.0 to 64 <7>PCI: Setting latency timer of device 0000:00:03.0 to 64 <7>PCI: Setting latency timer of device 0000:00:10.0 to 64 <6>NET: Registered protocol family 2 <6>Time: acpi_pm clocksource has been installed. <4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes) <4>TCP established hash table entries: 65536 (order: 10, 4194304 bytes) <4>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) <6>TCP: Hash tables configured (established 65536 bind 65536) <6>TCP reno registered <6>checking if image is initramfs... it is <6>Freeing initrd memory: 3311k freed <6>Simple Boot Flag at 0x36 set to 0x1 <6>audit: initializing netlink socket (disabled) <5>audit(1174482018.004:1): initialized <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:00.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:00.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:00.1 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:00.1 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:00.2 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:00.2 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:00.3 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:00.3 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:00.4 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:00.4 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:00.5 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:00.5 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:00.6 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:00.6 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:00.7 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:00.7 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:02.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:02.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:03.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:03.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:05.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:05.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:09.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:09.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:0a.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:0a.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:0a.1 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:0a.1 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:0a.3 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:0a.3 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:0b.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:0b.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:0b.1 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:0b.1 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:0d.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:0d.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:0e.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:0e.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:10.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:10.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:10.1 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:10.1 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:14.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:14.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:18.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:18.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:18.1 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:18.1 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:18.2 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:18.2 <7>PCI: Calling quirk ffffffff802f3139 for 0000:00:18.3 <7>PCI: Calling quirk ffffffff80358d25 for 0000:00:18.3 <7>PCI: Calling quirk ffffffff802f3139 for 0000:01:00.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:01:00.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:03:09.0 <7>PCI: Calling quirk ffffffff80358d25 for 0000:03:09.0 <7>PCI: Calling quirk ffffffff802f3139 for 0000:03:09.1 <7>PCI: Calling quirk ffffffff80358d25 for 0000:03:09.1 <7>PCI: Calling quirk ffffffff802f3139 for 0000:03:09.2 <7>PCI: Calling quirk ffffffff80358d25 for 0000:03:09.2 <7>PCI: Calling quirk ffffffff802f3139 for 0000:03:09.3 <7>PCI: Calling quirk ffffffff80358d25 for 0000:03:09.3 <7>PCI: Calling quirk ffffffff802f3139 for 0000:03:09.4 <7>PCI: Calling quirk ffffffff80358d25 for 0000:03:09.4 <7>PCI: Setting latency timer of device 0000:00:02.0 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:02.0:pcie00] <7>Allocate Port Service[0000:00:02.0:pcie03] <7>PCI: Setting latency timer of device 0000:00:03.0 to 64 <4>assign_interrupt_mode Found MSI capability <7>Allocate Port Service[0000:00:03.0:pcie00] <7>Allocate Port Service[0000:00:03.0:pcie03] <6>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000400000, using 3072k, total 65536k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=1 <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <4>Console: switching to colour frame buffer device 128x48 <6>fb0: VESA VGA frame buffer device <6>Real Time Clock Driver v1.12ac <6>Non-volatile memory driver v1.2 <6>Linux agpgart interface v0.102 (c) Dave Jones <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled <7>pnp: the driver 'serial' has been registered <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize <7>pnp: the driver 'i8042 kbd' has been registered <7>pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd' <7>pnp: the driver 'i8042 aux' has been registered <7>pnp: match found with the PnP device '00:0a' and the driver 'i8042 aux' <6>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>i8042.c: Detected active multiplexing controller, rev 1.1. <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX0 port at 0x60,0x64 irq 12 <6>serio: i8042 AUX1 port at 0x60,0x64 irq 12 <6>serio: i8042 AUX2 port at 0x60,0x64 irq 12 <6>serio: i8042 AUX3 port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>TCP cubic registered <6>NET: Registered protocol family 1 <6>Freeing unused kernel memory: 220k freed <6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 <6>input: SynPS/2 Synaptics TouchPad as /class/input/input1 <6>input: AT Translated Set 2 keyboard as /class/input/input2 <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <5>SCSI subsystem initialized <6>ACPI: Processor [CPU0] (supports 8 throttling states) <6>ACPI: Processor [CPU1] (supports 8 throttling states) <6>ACPI: Thermal Zone [TZS0] (54 C) <6>ACPI: Thermal Zone [TZS1] (57 C) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
