From: Patrice Chotard <patrice.chot...@st.com>
When using GPIO as IRQ source, the GPIO must be configured
in INPUT. The callback dedicated for this was missing in
pinctrl-st driver.
This fix the following kernel error when trying to lock a gpio
as IRQ:
[ 7.521095] gpio gpiochip7: (PIO11): gpiochip_lock_as_irq: tried to flag a
GPIO set as output for IRQ
[ 7.526018] gpio gpiochip7: (PIO11): unable to lock HW IRQ 6 for IRQ
[ 7.529405] genirq: Failed to request resources for 0-0053 (irq 81) on
irqchip GPIO
Signed-off-by: Patrice Chotard <patrice.chot...@st.com>
---
drivers/pinctrl/pinctrl-st.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
index 676efcc..84c2af8 100644
--- a/drivers/pinctrl/pinctrl-st.c
+++ b/drivers/pinctrl/pinctrl-st.c
@@ -1285,6 +1285,14 @@ static void st_gpio_irq_unmask(struct irq_data *d)
writel(BIT(d->hwirq), bank->base + REG_PIO_SET_PMASK);
}
+static int st_gpio_irq_request_resources(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ int pin = d->hwirq;
+
+ return st_gpio_direction_input(gc, pin);
+}
+
static int st_gpio_irq_set_type(struct irq_data *d, unsigned type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
@@ -1438,12 +1446,13 @@ static void st_gpio_irqmux_handler(struct irq_desc
*desc)
};
static struct irq_chip st_gpio_irqchip = {
- .name = "GPIO",
- .irq_disable = st_gpio_irq_mask,
- .irq_mask = st_gpio_irq_mask,
- .irq_unmask = st_gpio_irq_unmask,
- .irq_set_type = st_gpio_irq_set_type,
- .flags = IRQCHIP_SKIP_SET_WAKE,
+ .name = "GPIO",
+ .irq_request_resources = st_gpio_irq_request_resources,
+ .irq_disable = st_gpio_irq_mask,
+ .irq_mask = st_gpio_irq_mask,
+ .irq_unmask = st_gpio_irq_unmask,
+ .irq_set_type = st_gpio_irq_set_type,
+ .flags = IRQCHIP_SKIP_SET_WAKE,
};
static int st_gpiolib_register_bank(struct st_pinctrl *info,
--
1.9.1
