# HG changeset patch
# User Bryan O'Sullivan <[EMAIL PROTECTED]>
# Date 1173994465 25200
# Node ID 878b6054e9ca5327db9c9438f66265afaf88b055
# Parent a023ffe32d9df8cba7d8b15c24e7918eeb236a2c
IB/ipath - Fix calculation for number of kernel PIO buffers
If the module parameter "kpiobufs" is set too high, the calculation
to reset it to a sane value was incorrect.
Signed-off-by: Ralph Campbell <[EMAIL PROTECTED]>
Signed-off-by: Bryan O'Sullivan <[EMAIL PROTECTED]>
diff -r a023ffe32d9d -r 878b6054e9ca
drivers/infiniband/hw/ipath/ipath_init_chip.c
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c Thu Mar 15 14:34:25
2007 -0700
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c Thu Mar 15 14:34:25
2007 -0700
@@ -668,6 +668,7 @@ int ipath_init_chip(struct ipath_devdata
{
int ret = 0, i;
u32 val32, kpiobufs;
+ u32 piobufs, uports;
u64 val;
struct ipath_portdata *pd = NULL; /* keep gcc4 happy */
gfp_t gfp_flags = GFP_USER | __GFP_COMP;
@@ -702,16 +703,17 @@ int ipath_init_chip(struct ipath_devdata
* the in memory DMA'ed copies of the registers. This has to
* be done early, before we calculate lastport, etc.
*/
- val = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ piobufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
/*
* calc number of pioavail registers, and save it; we have 2
* bits per buffer.
*/
- dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2)
+ dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2)
/ (sizeof(u64) * BITS_PER_BYTE / 2);
+ uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0;
if (ipath_kpiobufs == 0) {
/* not set by user (this is default) */
- if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128)
+ if (piobufs >= (uports * IPATH_MIN_USER_PORT_BUFCNT) + 32)
kpiobufs = 32;
else
kpiobufs = 16;
@@ -719,31 +721,25 @@ int ipath_init_chip(struct ipath_devdata
else
kpiobufs = ipath_kpiobufs;
- if (kpiobufs >
- (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
- (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT))) {
- i = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
- (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT);
+ if (kpiobufs + (uports * IPATH_MIN_USER_PORT_BUFCNT) > piobufs) {
+ i = (int) piobufs -
+ (int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
if (i < 0)
i = 0;
- dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs for "
- "kernel leaves too few for %d user ports "
+ dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
+ "%d for kernel leaves too few for %d user ports "
"(%d each); using %u\n", kpiobufs,
- dd->ipath_cfgports - 1,
- IPATH_MIN_USER_PORT_BUFCNT, i);
+ piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i);
/*
* shouldn't change ipath_kpiobufs, because could be
* different for different devices...
*/
kpiobufs = i;
}
- dd->ipath_lastport_piobuf =
- dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - kpiobufs;
- dd->ipath_pbufsport = dd->ipath_cfgports > 1
- ? dd->ipath_lastport_piobuf / (dd->ipath_cfgports - 1)
- : 0;
- val32 = dd->ipath_lastport_piobuf -
- (dd->ipath_pbufsport * (dd->ipath_cfgports - 1));
+ dd->ipath_lastport_piobuf = piobufs - kpiobufs;
+ dd->ipath_pbufsport =
+ uports ? dd->ipath_lastport_piobuf / uports : 0;
+ val32 = dd->ipath_lastport_piobuf - (dd->ipath_pbufsport * uports);
if (val32 > 0) {
ipath_dbg("allocating %u pbufs/port leaves %u unused, "
"add to kernel\n", dd->ipath_pbufsport, val32);
@@ -754,8 +750,7 @@ int ipath_init_chip(struct ipath_devdata
dd->ipath_lastpioindex = dd->ipath_lastport_piobuf;
ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
"each for %u user ports\n", kpiobufs,
- dd->ipath_piobcnt2k + dd->ipath_piobcnt4k,
- dd->ipath_pbufsport, dd->ipath_cfgports - 1);
+ piobufs, dd->ipath_pbufsport, uports);
dd->ipath_f_early_init(dd);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
