On Thu, 26 Jan 2017, Michael Brunner wrote:
> This patch adds the DMI system ID of the Kontron COMe-bBD#, COMe-bKL6,
> COMe-cKL6, COMe-bSL6 and COMe-cAL6 boards to the Kontron PLD driver. The
> list of supported products in the module description is also updated.
>
> Signed-off-by: Michael Brunner <michael.brun...@kontron.com>
> Acked-by: Christian Rauch <christian.ra...@kontron.com>
> ---
> drivers/mfd/Kconfig | 5 +++++
> drivers/mfd/kempld-core.c | 40 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 45 insertions(+)
Applied, thanks.
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 4ce3b6f..5394125 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -506,17 +506,22 @@ config MFD_KEMPLD
> device may provide functions like watchdog, GPIO, UART and I2C bus.
>
> The following modules are supported:
> + * COMe-bBD#
> * COMe-bBL6
> * COMe-bHL6
> + * COMe-bSL6
> * COMe-bIP#
> + * COMe-bKL6
> * COMe-bPC2 (ETXexpress-PC)
> * COMe-bSC# (ETXexpress-SC T#)
> + * COMe-cAL6
> * COMe-cBL6
> * COMe-cBT6
> * COMe-cBW6
> * COMe-cCT6
> * COMe-cDC2 (microETXexpress-DC)
> * COMe-cHL6
> + * COMe-cKL6
> * COMe-cPC2 (microETXexpress-PC)
> * COMe-cSL6
> * COMe-mAL10
> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
> index da5722d..895f655 100644
> --- a/drivers/mfd/kempld-core.c
> +++ b/drivers/mfd/kempld-core.c
> @@ -496,6 +496,14 @@ static struct platform_driver kempld_driver = {
>
> static struct dmi_system_id kempld_dmi_table[] __initdata = {
> {
> + .ident = "BBD6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> .ident = "BBL6",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> @@ -512,6 +520,30 @@ static struct dmi_system_id kempld_dmi_table[]
> __initdata = {
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> }, {
> + .ident = "BKL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> + .ident = "BSL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> + .ident = "CAL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> .ident = "CBL6",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> @@ -600,6 +632,14 @@ static struct dmi_system_id kempld_dmi_table[]
> __initdata = {
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> }, {
> + .ident = "CKL6",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> .ident = "CNTG",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
