On Mon 30 Jan 07:03 PST 2017, Avaneesh Kumar Dwivedi wrote:

> This patch initialize certain driver related data based on compatible
> string. This enable driver to handle more than one similar device in
> by differentiating in probe their private data.
> 
> Signed-off-by: Avaneesh Kumar Dwivedi <[email protected]>

Applied, thanks

Regards,
Bjorn

> ---
>  drivers/remoteproc/qcom_adsp_pil.c | 47 
> ++++++++++++++++++++++++++------------
>  1 file changed, 33 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_adsp_pil.c 
> b/drivers/remoteproc/qcom_adsp_pil.c
> index 43a4ed2..f674301 100644
> --- a/drivers/remoteproc/qcom_adsp_pil.c
> +++ b/drivers/remoteproc/qcom_adsp_pil.c
> @@ -32,9 +32,12 @@
>  #include "qcom_mdt_loader.h"
>  #include "remoteproc_internal.h"
>  
> -#define ADSP_CRASH_REASON_SMEM               423
> -#define ADSP_FIRMWARE_NAME           "adsp.mdt"
> -#define ADSP_PAS_ID                  1
> +struct adsp_data {
> +     int crash_reason_smem;
> +     const char *firmware_name;
> +     int pas_id;
> +};
> +
>  
>  struct qcom_adsp {
>       struct device *dev;
> @@ -53,6 +56,9 @@ struct qcom_adsp {
>  
>       struct regulator *cx_supply;
>  
> +     int pas_id;
> +     int crash_reason_smem;
> +
>       struct completion start_done;
>       struct completion stop_done;
>  
> @@ -70,7 +76,7 @@ static int adsp_load(struct rproc *rproc, const struct 
> firmware *fw)
>       bool relocate;
>       int ret;
>  
> -     ret = qcom_scm_pas_init_image(ADSP_PAS_ID, fw->data, fw->size);
> +     ret = qcom_scm_pas_init_image(adsp->pas_id, fw->data, fw->size);
>       if (ret) {
>               dev_err(&rproc->dev, "invalid firmware metadata\n");
>               return ret;
> @@ -85,7 +91,8 @@ static int adsp_load(struct rproc *rproc, const struct 
> firmware *fw)
>       if (relocate) {
>               adsp->mem_reloc = fw_addr;
>  
> -             ret = qcom_scm_pas_mem_setup(ADSP_PAS_ID, adsp->mem_phys, 
> fw_size);
> +             ret = qcom_scm_pas_mem_setup(adsp->pas_id,
> +                                     adsp->mem_phys, fw_size);
>               if (ret) {
>                       dev_err(&rproc->dev, "unable to setup memory for 
> image\n");
>                       return ret;
> @@ -113,7 +120,7 @@ static int adsp_start(struct rproc *rproc)
>       if (ret)
>               goto disable_clocks;
>  
> -     ret = qcom_scm_pas_auth_and_reset(ADSP_PAS_ID);
> +     ret = qcom_scm_pas_auth_and_reset(adsp->pas_id);
>       if (ret) {
>               dev_err(adsp->dev,
>                       "failed to authenticate image and release reset\n");
> @@ -124,7 +131,7 @@ static int adsp_start(struct rproc *rproc)
>                                         msecs_to_jiffies(5000));
>       if (!ret) {
>               dev_err(adsp->dev, "start timed out\n");
> -             qcom_scm_pas_shutdown(ADSP_PAS_ID);
> +             qcom_scm_pas_shutdown(adsp->pas_id);
>               ret = -ETIMEDOUT;
>               goto disable_regulators;
>       }
> @@ -157,7 +164,7 @@ static int adsp_stop(struct rproc *rproc)
>                                   BIT(adsp->stop_bit),
>                                   0);
>  
> -     ret = qcom_scm_pas_shutdown(ADSP_PAS_ID);
> +     ret = qcom_scm_pas_shutdown(adsp->pas_id);
>       if (ret)
>               dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
>  
> @@ -197,7 +204,7 @@ static irqreturn_t adsp_fatal_interrupt(int irq, void 
> *dev)
>       size_t len;
>       char *msg;
>  
> -     msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, ADSP_CRASH_REASON_SMEM, &len);
> +     msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, adsp->crash_reason_smem, &len);
>       if (!IS_ERR(msg) && len > 0 && msg[0])
>               dev_err(adsp->dev, "fatal error received: %s\n", msg);
>  
> @@ -311,20 +318,25 @@ static int adsp_alloc_memory_region(struct qcom_adsp 
> *adsp)
>  
>  static int adsp_probe(struct platform_device *pdev)
>  {
> +     const struct adsp_data *desc;
>       struct qcom_adsp *adsp;
>       struct rproc *rproc;
>       int ret;
>  
> +     desc = of_device_get_match_data(&pdev->dev);
> +     if (!desc)
> +             return -EINVAL;
> +
>       if (!qcom_scm_is_available())
>               return -EPROBE_DEFER;
>  
> -     if (!qcom_scm_pas_supported(ADSP_PAS_ID)) {
> -             dev_err(&pdev->dev, "PAS is not available for ADSP\n");
> +     if (!qcom_scm_pas_supported(desc->pas_id)) {
> +             dev_err(&pdev->dev, "PAS is not available for subsystem\n");
>               return -ENXIO;
>       }
>  
>       rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops,
> -                         ADSP_FIRMWARE_NAME, sizeof(*adsp));
> +                         desc->firmware_name, sizeof(*adsp));
>       if (!rproc) {
>               dev_err(&pdev->dev, "unable to allocate remoteproc\n");
>               return -ENOMEM;
> @@ -344,6 +356,8 @@ static int adsp_probe(struct platform_device *pdev)
>       if (ret)
>               goto free_rproc;
>  
> +     adsp->pas_id = desc->pas_id;
> +     adsp->crash_reason_smem = desc->crash_reason_smem;
>       ret = adsp_init_clock(adsp);
>       if (ret)
>               goto free_rproc;
> @@ -407,9 +421,14 @@ static int adsp_remove(struct platform_device *pdev)
>       return 0;
>  }
>  
> +static const struct adsp_data adsp_resource_init = {
> +             .crash_reason_smem = 423,
> +             .firmware_name = "adsp.mdt",
> +             .pas_id = 1,
> +};
>  static const struct of_device_id adsp_of_match[] = {
> -     { .compatible = "qcom,msm8974-adsp-pil" },
> -     { .compatible = "qcom,msm8996-adsp-pil" },
> +     { .compatible = "qcom,msm8974-adsp-pil", .data = &adsp_resource_init},
> +     { .compatible = "qcom,msm8996-adsp-pil", .data = &adsp_resource_init},
>       { },
>  };
>  MODULE_DEVICE_TABLE(of, adsp_of_match);
> -- 
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. 
> is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project.
> 

Reply via email to