The A64 only has a single set of pins for each MMC controller. Since we
already have boards that require all of them, let's add them to the DTSI.
Reviewed-by: Andre Przywara <andre.przyw...@arm.com>
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 ++++++++++++++++++++-
1 file changed, 25 insertions(+), 0 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index d0ee7abe3b87..7b79c319ad3c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -244,6 +244,31 @@
function = "i2c1";
};
+ mmc0_pins: mmc0-pins {
+ pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc1_pins: mmc1-pins {
+ pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pins = "PC1", "PC5", "PC6", "PC8", "PC9",
+ "PC10","PC11", "PC12", "PC13",
+ "PC14", "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
uart0_pins_a: uart0@0 {
pins = "PB8", "PB9";
function = "uart0";
--
git-series 0.8.11
