On Fri, Jan 20, 2017 at 09:50:38PM -0800, Matt Ranostay wrote:
> Cc: devicet...@vger.kernel.org
> Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
> ---
> .../devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt | 14
> ++++++++++++++
> .../devicetree/bindings/net/wireless/marvell-8xxx.txt | 7 ++++++-
> 2 files changed, 20 insertions(+), 1 deletion(-)
> create mode 100644
> Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
> b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
> new file mode 100644
> index 000000000000..4bb56766982e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
> @@ -0,0 +1,14 @@
> +* Marvell SD8787 power sequence provider
> +
> +Required properties:
> +- compatible: must be "mmc-pwrseq-sd8787".
> +- powerdown-gpio: contains a power down GPIO specifier with active state
> +- reset-gpio: contains a reset GPIO specifier with active state
My comments on the previous v3 still apply.
> +
> +Example:
> +
> + wifi_pwrseq: wifi_pwrseq {
> + compatible = "mmc-pwrseq-sd8787";
> + powerdown-gpio = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
> + reset-gpio = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
> + }
