On Sun, Jan 08, 2017 at 09:41:45AM +0100, Lukas Wunner wrote:
> Hotplug ports generally block their parents from suspending to D3hot as
> otherwise their interrupts couldn't be delivered.
>
> An exception are Thunderbolt host controllers: They have a separate
> GPIO pin to side-band signal plug events even if the controller is
> powered down or its parent ports are suspended to D3. They can be told
> apart from Thunderbolt controllers in attached devices by checking if
> they're situated below a non-Thunderbolt device (typically a root port,
> or the downstream port of a PCIe switch in the case of the MacPro6,1).
>
> To enable runtime PM for Thunderbolt on the Mac, the downstream bridges
> of a host controller must not block runtime PM on the upstream bridge as
> power to the chip is only cut once the upstream bridge has suspended.
> Amend the condition in pci_dev_check_d3cold() accordingly.
>
> Cc: Mika Westerberg <mika.westerb...@linux.intel.com>
> Cc: Rafael J. Wysocki <rafael.j.wyso...@intel.com>
> Cc: Andreas Noever <andreas.noe...@gmail.com>
> Cc: Tomas Winkler <tomas.wink...@intel.com>
> Cc: Amir Levy <amir.jer.l...@intel.com>
> Signed-off-by: Lukas Wunner <lu...@wunner.de>
> ---
> drivers/pci/pci.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 8ed098d..0b03fe7 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2271,6 +2271,7 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge)
>
> static int pci_dev_check_d3cold(struct pci_dev *dev, void *data)
> {
> + struct pci_dev *parent, *grandparent;
> bool *d3cold_ok = data;
>
> if (/* The device needs to be allowed to go D3cold ... */
> @@ -2284,7 +2285,17 @@ static int pci_dev_check_d3cold(struct pci_dev *dev,
> void *data)
> !pci_power_manageable(dev) ||
>
> /* Hotplug interrupts cannot be delivered if the link is down. */
> - dev->is_hotplug_bridge)
> + (dev->is_hotplug_bridge &&
> +
> + /*
> + * Exception: Thunderbolt host controllers have a pin to
> + * side-band signal plug events. Their hotplug ports are
> + * recognizable by having a non-Thunderbolt device as
> + * grandparent.
> + */
> + !(dev->is_thunderbolt && (parent = pci_upstream_bridge(dev)) &&
> + (grandparent = pci_upstream_bridge(parent)) &&
> + !grandparent->is_thunderbolt)))
Can you move this to its own helper function?
>
> *d3cold_ok = false;
>
> --
> 2.11.0
