Remove pwm0grp since it is:
a) Not referenced anywhere in the DTS file (unlike Tower board it
is based on, this board does not use/expose FTM0)
b) Configures PTB2 and PTB3 in a way that contradicts
pinctrl-mdio-mux
Cc: Shawn Guo <shawn...@kernel.org>
Cc: Rob Herring <robh...@kernel.org>
Cc: Mark Rutland <mark.rutl...@arm.com>
Cc: Russell King <li...@armlinux.org.uk>
Cc: Sascha Hauer <ker...@pengutronix.de>
Cc: Stefan Agner <ste...@agner.ch>
Cc: devicet...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: and...@lunn.ch
Cc: Vivien Didelot <vivien.dide...@savoirfairelinux.com>
Cc: cphe...@gmail.com
Tested-by: Nikita Yushchenko <nikita.yo...@cogentembedded.com>
Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
---
Changes since v5:
- Patchset rebased on 4.10-rc3
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 958b4c4..c8e11a5 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -729,15 +729,6 @@
>;
};
- pinctrl_pwm0: pwm0grp {
- fsl,pins = <
- VF610_PAD_PTB0__FTM0_CH0 0x1582
- VF610_PAD_PTB1__FTM0_CH1 0x1582
- VF610_PAD_PTB2__FTM0_CH2 0x1582
- VF610_PAD_PTB3__FTM0_CH3 0x1582
- >;
- };
-
pinctrl_qspi0: qspi0grp {
fsl,pins = <
VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
--
2.9.3
