On Mon, Jan 02, 2017 at 05:37:17PM +0100, Quentin Schulz wrote: > + /* > + * IIO framework gives mV but Power Supply framework gives µV. > + */ > + val->intval *= 1000;
s/gives/wants/ ?
> +static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> + int val)
> +{
> + switch (val) {
> + case 4100000:
> + return regmap_update_bits(axp20x_batt->regmap,
> + AXP20X_CHRG_CTRL1,
> + AXP20X_CHRG_CTRL1_TGT_VOLT,
> + AXP20X_CHRG_CTRL1_TGT_4_1V);
> + case 4150000:
> + if (axp20x_batt->axp_id == AXP221_ID)
> + return -EINVAL;
> +
> + return regmap_update_bits(axp20x_batt->regmap,
> + AXP20X_CHRG_CTRL1,
> + AXP20X_CHRG_CTRL1_TGT_VOLT,
> + AXP20X_CHRG_CTRL1_TGT_4_15V);
> + case 4200000:
> + return regmap_update_bits(axp20x_batt->regmap,
> + AXP20X_CHRG_CTRL1,
> + AXP20X_CHRG_CTRL1_TGT_VOLT,
> + AXP20X_CHRG_CTRL1_TGT_4_2V);
> + default:
> + /*
> + * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
> + * can be set to 4.22V and 4.24V, but these voltages are too
> + * high for Lithium based batteries (AXP PMICs are supposed to
> + * be used with these kinds of battery).
> + */
> + return -EINVAL;
> + }
Since all your calls to regmap are the same, something like:
case 4100000:
val = AXP20X_CHRG_CTRL1_TGT_4_1V;
break;
case 4150000:
val = AXP20X_CHRG_CTRL1_TGT_4_15V;
break;
regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
AXP20X_CHRG_CTRL1_TGT_VOLT, val);
It would also get rid of your warnings in checkpatch.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
Description: PGP signature
