On Thu, 5 Jan 2017 08:26:09 +0100
Lukasz Majewski <lu...@denx.de> wrote:
> Hi Boris,
>
> > On Thu, 5 Jan 2017 00:36:45 +0100
> > Lukasz Majewski <lu...@denx.de> wrote:
> >
> > > From: Boris Brezillon <boris.brezil...@free-electrons.com>
> >
> > Can you keep Sascha as the author of this patch?
>
> But the patch differs from the original one - and that change was sent
> by you - so I assume that you made the modifications.
>
> Apparently there are two authors and we only have one "Author"
> field :-) so I took the patch as it was sent by you.
Well, when the changes are substantial it can be justified, but here
the changes are trivial (2 lines changed), and I don't think it calls
for an authorship change (unless Sascha doesn't want to take the
responsibility for those 2 lines).
>
> Is the rest of the series correct?
I'll have a look.
>
> Best regards,
> Łukasz Majewski
>
> >
> > >
> > > The use of the ipg clock was introduced with commit 7b27c160c681
> > > ("pwm: i.MX: fix clock lookup").
> > > In the commit message it was claimed that the ipg clock is enabled
> > > for register accesses. This is true for the ->config() callback,
> > > but not for the ->set_enable() callback. Given that the ipg clock
> > > is not consistently enabled for all register accesses we can assume
> > > that either it is not required at all or that the current code does
> > > not work. Remove the ipg clock code for now so that it's no longer
> > > in the way of refactoring the driver.
> > >
> > > In the other hand, the imx7 IP requires the peripheral clock to be
> > > enabled before accessing its registers. Since ->config() can be
> > > called when the PWM is disabled (in which case, the peripheral
> > > clock is also disabled), we need to surround the imx->config() with
> > > clk_prepare_enable(per_clk)/clk_disable_unprepare(per_clk) calls.
> > >
> > > Note that the imx7 IP was working fine so far because the ipg clock
> > > was actually pointing to the peripheral clock, which guaranteed
> > > peripheral clock activation even when ->config() was called when
> > > the PWM was disabled.
> > >
> > > Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
> > > Signed-off-by: Boris Brezillon <boris.brezil...@free-electrons.com>
> > > Cc: Philipp Zabel <p.za...@pengutronix.de>
> > > ---
> > > Changes in v4:
> > > - Enable per clk before calling imx->config()
> > >
> > > Changes in v3:
> > > - New patch
> > > ---
> > > drivers/pwm/pwm-imx.c | 12 ++----------
> > > 1 file changed, 2 insertions(+), 10 deletions(-)
> > >
> > > diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
> > > index d600fd5..b1d1e50 100644
> > > --- a/drivers/pwm/pwm-imx.c
> > > +++ b/drivers/pwm/pwm-imx.c
> > > @@ -49,7 +49,6 @@
> > >
> > > struct imx_chip {
> > > struct clk *clk_per;
> > > - struct clk *clk_ipg;
> > >
> > > void __iomem *mmio_base;
> > >
> > > @@ -206,13 +205,13 @@ static int imx_pwm_config(struct pwm_chip
> > > *chip, struct imx_chip *imx = to_imx_chip(chip);
> > > int ret;
> > >
> > > - ret = clk_prepare_enable(imx->clk_ipg);
> > > + ret = clk_prepare_enable(imx->clk_per);
> > > if (ret)
> > > return ret;
> > >
> > > ret = imx->config(chip, pwm, duty_ns, period_ns);
> > >
> > > - clk_disable_unprepare(imx->clk_ipg);
> > > + clk_disable_unprepare(imx->clk_per);
> > >
> > > return ret;
> > > }
> > > @@ -293,13 +292,6 @@ static int imx_pwm_probe(struct
> > > platform_device *pdev) return PTR_ERR(imx->clk_per);
> > > }
> > >
> > > - imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
> > > - if (IS_ERR(imx->clk_ipg)) {
> > > - dev_err(&pdev->dev, "getting ipg clock failed with
> > > %ld\n",
> > > - PTR_ERR(imx->clk_ipg));
> > > - return PTR_ERR(imx->clk_ipg);
> > > - }
> > > -
> > > imx->chip.ops = &imx_pwm_ops;
> > > imx->chip.dev = &pdev->dev;
> > > imx->chip.base = -1;
> >
>
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
