> -----Original Message----- > From: Scott Wood [mailto:o...@buserror.net] > Sent: Wednesday, January 04, 2017 6:38 PM > To: Troy Jia <hongtao....@nxp.com>; rui.zh...@intel.com; edubez...@gmail.com; > Y.T. Tang <yuantian.t...@nxp.com>; robh...@kernel.org > Cc: linux...@vger.kernel.org; devicet...@vger.kernel.org; linux- > ker...@vger.kernel.org > Subject: Re: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal bindings > > On Wed, 2017-01-04 at 16:57 +0800, Jia Hongtao wrote: > > For different types of SoC the sensor id and endianness may vary. > > "#thermal-sensor-cells" is used to provide sensor id information. > > "little-endian" property is to tell the endianness of TMU. > > > > Signed-off-by: Jia Hongtao <hongtao....@nxp.com> > > Acked-by: Rob Herring <r...@kernel.org> > > --- > > Documentation/devicetree/bindings/thermal/qoriq-thermal.txt | 7 > > +++++++ > > 1 file changed, 7 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > > b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > > index 66223d5..20ca4ef 100644 > > --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > > +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt > > @@ -17,6 +17,12 @@ Required properties: > > calibration data, as specified by the SoC reference manual. > > The first cell of each pair is the value to be written to TTCFGR, > > and the second is the value to be written to TSCFGR. > > +- #thermal-sensor-cells : Must be 1. The sensor specifier is the monitoring > > + site ID, and represents the "n" in TRITSRn and TRATSRn. > > I assume the driver will continue to work with existing device trees where > this > information is absent? If so, ACK for the whole series.
Yes. The driver works for all existing device trees. Thanks for the ACK. > > -Scott
