early console in setup code
Probing EDD (edd=off to disable)... ok
early console in extract_kernel
input_data: 0x0296c069
input_len: 0x006803d6
output: 0x01000000
output_len: 0x0117b1e0
kernel_total_size: 0x02000000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.9.0-rc8-01743-g75f6dfe (kbuild@athens) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #354 Sat Dec 31 11:13:49 CST 2016
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x035fffff]
[    0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[    0.000000] BRK [0x02bf2000, 0x02bf2fff] PGTABLE
[    0.000000] BRK [0x02bf3000, 0x02bf3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x13c8a000-0x13fdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F69C0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x0000000013FE18DC 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x0000000013FE17B8 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x0000000013FE0040 001778 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x0000000013FE0000 000040
[    0.000000] ACPI: APIC 0x0000000013FE182C 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x0000000013FE18A4 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13fe0000
[    0.000000]   low ram: 0 - 13fe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13c89001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 927394131 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000013fdffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000013fdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000] On node 0 totalpages: 81790
[    0.000000] free_area_init_node: node 0, pgdat 820b0180, node_mem_map 939b9024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 684 pages used for memmap
[    0.000000]   Normal zone: 77792 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1e91e40
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81070
[    0.000000] Kernel command line: ip=::::vm-lkp-hsw01-openwrt-ia32-12::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-hsw01-openwrt-ia32-12/trinity-300s-openwrt-i386-2016-03-16.cgz-75f6dfe3e652e1adef8cc1b073c89f3e22103a8f-20161231-21558-vybma4-0.yaml ARCH=i386 kconfig=i386-randconfig-a0-201652 branch=linux-devel/devel-spot-201612302128 commit=75f6dfe3e652e1adef8cc1b073c89f3e22103a8f BOOT_IMAGE=/pkg/linux/i386-randconfig-a0-201652/gcc-6/75f6dfe3e652e1adef8cc1b073c89f3e22103a8f/vmlinuz-4.9.0-rc8-01743-g75f6dfe max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-hsw01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-a0-201652/gcc-6/75f6dfe3e652e1adef8cc1b073c89f3e22103a8f/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 291708K/327160K available (9779K kernel code, 2280K rwdata, 5040K rodata, 784K init, 10608K bss, 35452K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff8d000 - 0xfffff000   ( 456 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0x947e0000 - 0xffbfe000   (1716 MB)
[    0.000000]     lowmem  : 0x80000000 - 0x93fe0000   ( 319 MB)
[    0.000000]       .init : 0x820b6000 - 0x8217a000   ( 784 kB)
[    0.000000]       .data : 0x8198d2fc - 0x820b5000   (7327 kB)
[    0.000000]       .text : 0x81000000 - 0x8198d2fc   (9780 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=9340a000 soft=9340c000
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 5151 kB
[    0.000000]  per task-struct memory footprint: 2112 bytes
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
failed|
[    0.000000] failed|
failed|
[    0.000000] 
[    0.000000]                  A-B-B-A deadlock:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
failed|
[    0.000000] failed|
failed|
[    0.000000] 
[    0.000000]              A-B-B-C-C-A deadlock:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
failed|
[    0.000000] failed|
failed|
[    0.000000] 
[    0.000000]              A-B-C-A-B-C deadlock:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
failed|
[    0.000000] failed|
failed|
[    0.000000] 
[    0.000000]          A-B-B-C-C-D-D-A deadlock:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
failed|
[    0.000000] failed|
failed|
[    0.000000] 
[    0.000000]          A-B-C-D-B-D-D-A deadlock:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
failed|
[    0.000000] failed|
failed|
[    0.000000] 
[    0.000000]          A-B-C-D-B-C-D-A deadlock:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
failed|
[    0.000000] failed|
failed|
[    0.000000] 
[    0.000000]                     double unlock:
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000] 
[    0.000000]                   initialize held:
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000] 
[    0.000000]                  bad unlock order:
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000] 
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:
[    0.000000]              |
  ok  |
[    0.000000]              |
failed|
[    0.000000] 
[    0.000000]            recursive read-lock #2:
[    0.000000]              |
  ok  |
[    0.000000]              |
failed|
[    0.000000] 
[    0.000000]             mixed read-write-lock:
[    0.000000]              |
failed|
[    0.000000]              |
failed|
[    0.000000] 
[    0.000000]             mixed write-read-lock:
[    0.000000]              |
failed|
[    0.000000]              |
failed|
[    0.000000] 
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]      soft-irqs-on + irq-safe-A/12:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]      hard-irqs-on + irq-safe-A/21:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]      soft-irqs-on + irq-safe-A/21:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]        sirq-safe-A => hirqs-on/12:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]        sirq-safe-A => hirqs-on/21:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]          hard-safe-A + irqs-on/12:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]          soft-safe-A + irqs-on/12:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]          hard-safe-A + irqs-on/21:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]          soft-safe-A + irqs-on/21:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #1/123:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #1/123:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #1/132:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #1/132:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #1/213:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #1/213:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #1/231:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #1/231:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #1/312:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #1/312:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #1/321:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #1/321:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #2/123:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #2/123:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #2/132:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #2/132:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #2/213:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #2/213:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #2/231:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #2/231:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #2/312:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #2/312:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     hard-safe-A + unsafe-B #2/321:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]     soft-safe-A + unsafe-B #2/321:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq lock-inversion/123:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq lock-inversion/123:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq lock-inversion/132:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq lock-inversion/132:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq lock-inversion/213:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq lock-inversion/213:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq lock-inversion/231:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq lock-inversion/231:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq lock-inversion/312:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq lock-inversion/312:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq lock-inversion/321:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq lock-inversion/321:
[    0.000000] failed|
failed|
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq read-recursion/123:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq read-recursion/123:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq read-recursion/132:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq read-recursion/132:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq read-recursion/213:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq read-recursion/213:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq read-recursion/231:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq read-recursion/231:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq read-recursion/312:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq read-recursion/312:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       hard-irq read-recursion/321:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]       soft-irq read-recursion/321:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]   | Wound/wait tests |
[    0.000000]   ---------------------
[    0.000000]                   ww api failures:
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]                ww contexts mixing:
[    0.000000] failed|
  ok  |
[    0.000000] 
[    0.000000]              finishing ww context:
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000] 
[    0.000000]                locking mismatches:
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]                  EDEADLK handling:
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000]   ok  |
  ok  |
[    0.000000] 
[    0.000000]            spinlock nest unlocked:
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]   -----------------------------------------------------
[    0.000000]                                  |block | try  |context|
[    0.000000]   -----------------------------------------------------
[    0.000000]                           context:
[    0.000000] failed|
  ok  |
[    0.000000]   ok  |
[    0.000000] 
[    0.000000]                               try:
[    0.000000] failed|
  ok  |
[    0.000000] failed|
[    0.000000] 
[    0.000000]                             block:
[    0.000000] failed|
  ok  |
[    0.000000] failed|
[    0.000000] 
[    0.000000]                          spinlock:
[    0.000000] failed|
  ok  |
[    0.000000] failed|
[    0.000000] 
[    0.000000] --------------------------------------------------------
[    0.000000] 141 out of 253 testcases failed, as expected. |
[    0.000000] ----------------------------------------------------
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2593.992 MHz processor
[    0.130563] Calibrating delay loop (skipped) preset value.. 5187.98 BogoMIPS (lpj=2593992)
[    0.131136] pid_max: default: 4096 minimum: 301
[    0.131409] ACPI: Core revision 20160831
[    0.132641] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.133078] Security Framework initialized
[    0.133357] Yama: becoming mindful.
[    0.133584] LoadPin: ready to pin (currently enabled)
[    0.133936] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.134394] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.135056] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.135388] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.135675] CPU: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.137224] Performance Events: PMU not available due to virtualization, using software events only.
[    0.148548] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.148839] enabled ExtINT on CPU#0
[    0.149580] ENABLING IO-APIC IRQs
[    0.149757] init IO_APIC IRQs
[    0.149958]  apic 0 pin 0 not connected
[    0.150244] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.150724] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.151220] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.151619] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.152085] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.152512] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.152913] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.153369] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.153857] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.154393] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.154804] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.155332] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.155758] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.156248] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.156666] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.157163]  apic 0 pin 16 not connected
[    0.157396]  apic 0 pin 17 not connected
[    0.157618]  apic 0 pin 18 not connected
[    0.157832]  apic 0 pin 19 not connected
[    0.158110]  apic 0 pin 20 not connected
[    0.158347]  apic 0 pin 21 not connected
[    0.158540]  apic 0 pin 22 not connected
[    0.158732]  apic 0 pin 23 not connected
[    0.159078] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.159420] Using local APIC timer interrupts.
[    0.159420] calibrating APIC timer ...
[    0.261004] ... lapic delta = 6247635
[    0.261207] ... PM-Timer delta = 357798
[    0.261415] ... PM-Timer result ok
[    0.261591] ..... delta 6247635
[    0.261754] ..... mult: 268333880
[    0.261929] ..... calibration result: 999621
[    0.262179] ..... CPU clock speed is 2592.0858 MHz.
[    0.262441] ..... host bus clock speed is 999.0621 MHz.
[    0.262908] devtmpfs: initialized
[    0.264099] evm: security.capability
[    0.265163] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.265709] xor: measuring software checksum speed
[    0.275736]    pIII_sse  : 24112.000 MB/sec
[    0.285732]    prefetch64-sse: 28064.000 MB/sec
[    0.285986] xor: using function: prefetch64-sse (28064.000 MB/sec)
[    0.286320] prandom: seed boundary self test passed
[    0.286947] prandom: 100 self tests passed
[    0.287485] NET: Registered protocol family 16
[    0.288885] cpuidle: using governor ladder
[    0.289102] cpuidle: using governor menu
[    0.290184] ACPI: bus type PCI registered
[    0.290464] PCI: Using configuration type 1 for base access
[    0.303398] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.320724] raid6: mmxx1    gen()  6101 MB/s
[    0.337717] raid6: mmxx2    gen()  6550 MB/s
[    0.354711] raid6: sse1x1   gen()  5238 MB/s
[    0.371703] raid6: sse1x2   gen()  6445 MB/s
[    0.388695] raid6: sse2x1   gen() 10292 MB/s
[    0.405699] raid6: sse2x1   xor()  6935 MB/s
[    0.422692] raid6: sse2x2   gen()  5480 MB/s
[    0.439676] raid6: sse2x2   xor()  8150 MB/s
[    0.439933] raid6: using algorithm sse2x1 gen() 10292 MB/s
[    0.440213] raid6: .... xor() 6935 MB/s, rmw enabled
[    0.440492] raid6: using intx1 recovery algorithm
[    0.440866] ACPI: Added _OSI(Module Device)
[    0.441110] ACPI: Added _OSI(Processor Device)
[    0.441345] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.441580] ACPI: Added _OSI(Processor Aggregator Device)
[    0.444263] ACPI: Interpreter enabled
[    0.444467] ACPI: (supports S0 S5)
[    0.444639] ACPI: Using IOAPIC for interrupt routing
[    0.444915] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.449825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.450193] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[    0.450590] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.451428] PCI host bridge to bus 0000:00
[    0.451642] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.451984] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.452319] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.452690] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window]
[    0.453061] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.453358] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.454189] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.454954] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.457381] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.458854] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.459260] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.459609] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.460021] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.460605] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.461188] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.461601] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.462283] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.464792] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.467720] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.473813] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.474800] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.475853] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.476851] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.480530] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.481105] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.481942] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.485979] pci_bus 0000:00: on NUMA node 0
[    0.486663] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.487120] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.487585] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.488027] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.488401] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.488784] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.489401] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.489717] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.490195] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.490502] vgaarb: loaded
[    0.491017] SCSI subsystem initialized
[    0.491307] libata version 3.00 loaded.
[    0.491589] Linux video capture interface: v2.00
[    0.491854] pps_core: LinuxPPS API ver. 1 registered
[    0.492120] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.492592] EDAC MC: Ver: 3.0.0
[    0.492935] wmi: Mapper loaded
[    0.493170] FPGA manager framework
[    0.493382] PCI: Using ACPI for IRQ routing
[    0.493639] PCI: pci_cache_line_size set to 64 bytes
[    0.494029] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.494371] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff]
[    0.495745] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.496041] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.499415] clocksource: Switched to clocksource kvm-clock
[    0.499965] VFS: Disk quotas dquot_6.6.0
[    0.500197] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.500652] pnp: PnP ACPI init
[    0.500886] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.501288] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.501673] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.502044] pnp 00:03: [dma 2]
[    0.502238] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.502655] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.503084] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.503554] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.504151] pnp: PnP ACPI: found 7 devices
[    0.539207] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.539717] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.540041] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.540363] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.540734] pci_bus 0000:00: resource 7 [mem 0x14000000-0xfebfffff window]
[    0.541174] NET: Registered protocol family 1
[    0.541413] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.541736] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.542061] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.542437] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.542867] PCI: CLS 0 bytes, default 64
[    0.543144] Unpacking initramfs...
[    0.732745] Freeing initrd memory: 3416K (93c8a000 - 93fe0000)
[    0.734193] Scanning for low memory corruption every 60 seconds
[    0.734968] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[    0.735469] NatSemi SCx200 Driver
[    0.735672] rcu-torture:--- Start of test: nreaders=1 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0
[    0.737272] rcu-torture: Creating rcu_torture_writer task
[    0.737630] rcu-torture: Creating rcu_torture_fakewriter task
[    0.737982] rcu-torture: rcu_torture_writer task started
[    0.738288] rcu-torture: GP expediting controlled from boot/sysfs for rcu,
[    0.738632] rcu-torture: Disabled dynamic grace-period expediting.
[    0.738947] rcu-torture: Creating rcu_torture_fakewriter task
[    0.739245] rcu-torture: rcu_torture_fakewriter task started
[    0.739538] rcu-torture: Creating rcu_torture_fakewriter task
[    0.739836] rcu-torture: rcu_torture_fakewriter task started
[    0.740141] rcu-torture: Creating rcu_torture_fakewriter task
[    0.741143] rcu-torture: rcu_torture_fakewriter task started
[    0.741456] rcu-torture: Creating rcu_torture_reader task
[    0.741760] rcu-torture: rcu_torture_fakewriter task started
[    0.742125] rcu-torture: Creating rcu_torture_stats task
[    0.742464] rcu-torture: rcu_torture_reader task started
[    0.742739] rcu-torture: Creating torture_shuffle task
[    0.743011] rcu-torture: rcu_torture_stats task started
[    0.743278] rcu-torture: Creating torture_stutter task
[    0.744173] rcu-torture: torture_shuffle task started
[    0.744439] rcu-torture: Creating rcu_torture_cbflood task
[    0.744727] rcu-torture: torture_stutter task started
[    0.745122] futex hash table entries: 16 (order: -3, 832 bytes)
[    0.745536] rcu-torture: rcu_torture_cbflood task started
[    0.745839] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.746194] zbud: loaded
[    0.746473] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.746858] efs: 1.0a - http://aeschi.ch.eu.org/efs/
[    0.747139] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.747399] QNX4 filesystem 0.2.3 registered.
[    0.747625] qnx6: QNX6 filesystem 1.0.0 registered.
[    0.747909] fuse init (API version 7.26)
[    0.748198] orangefs_debugfs_init: called with debug mask: :none: :0:
[    0.748596] orangefs_init: module version upstream loaded
[    0.748868] SGI XFS with ACLs, security attributes, realtime, debug enabled
[    0.749356] befs: version: 0.9.3
[    0.749703] gfs2: GFS2 installed
[    0.753693] Key type asymmetric registered
[    0.753985] Asymmetric key parser 'x509' registered
[    0.754300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.754726] io scheduler noop registered
[    0.754933] io scheduler deadline registered (default)
[    0.755195] io scheduler cfq registered
[    0.755388] test_string_helpers: Running tests...
[    0.756638] test_hexdump: all 1184 tests passed
[    0.764063] test_hash: __hash_32() has no arch implementation to test.
[    0.764392] test_hash: hash_32() has no arch implementation to test.
[    0.764710] test_hash: hash_64() has no arch implementation to test.
[    0.765028] test_hash: 33152 tests passed.
[    0.765367] test_printf: all 260 tests passed
[    0.792165] test_bitmap: all 460506 tests passed
[    0.792401] test_uuid: all 18 tests passed
[    0.792933] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.793186] crc32: self tests passed, processed 225944 bytes in 159460 nsec
[    0.793738] crc32c: CRC_LE_BITS = 64
[    0.793971] crc32c: self tests passed, processed 225944 bytes in 92027 nsec
[    0.806288] crc32_combine: 8373 self tests passed
[    0.818640] crc32c_combine: 8373 self tests passed
[    0.818922] xz_dec_test: module loaded
[    0.819111] xz_dec_test: Create a device node with 'mknod xz_dec_test c 248 0' and write .xz files to it.
[    0.819599] glob: 64 self-tests passed, 0 failed
[    0.819843] rbtree testing
[    1.111595]  -> 7564 cycles
[    1.138023] augmented rbtree testing
[    1.523851]  -> 10003 cycles
[    1.555644] gpio-mockup: probe of gpio-mockup failed with error -22
[    1.556194] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.556490] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.556830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.557520] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[    1.558286] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.558670] ACPI: Power Button [PWRF]
[    1.559119] GHES: HEST is not enabled!
[    1.559315] EINJ: EINJ table not found.
[    1.559513] ERST DBG: ERST support is disabled.
[    1.560140] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.582447] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.604523] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.605326] Initializing Nozomi driver 2.1d
[    1.605601] sonypi: Sony Programmable I/O Controller Driver v1.26.
[    1.606069] Non-volatile memory driver v1.3
[    1.606438] ppdev: user-space parallel port driver
[    1.606685] scx200_gpio: no SCx200 gpio present
[    1.606971] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[    1.607366] platform pc8736x_gpio.0: no device found
[    1.607670] nsc_gpio initializing
[    1.607887] smapi::smapi_init, ERROR invalid usSmapiID
[    1.608165] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    1.608628] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    1.608985] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    1.609295] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    1.609913] [drm] radeon kernel modesetting enabled.
[    1.610407] BUG: unable to handle kernel NULL pointer dereference at 0000002c
[    1.610833] IP: [<8143c0ba>] drm_dev_register+0xe9/0x173
[    1.611131] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 
[    1.611427] 
[    1.611513] Oops: 0000 [#1]
[    1.611656] CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.0-rc8-01743-g75f6dfe #354
[    1.612026] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    1.612523] task: 9342d000 task.stack: 9343e000
[    1.612749] EIP: 0060:[<8143c0ba>] EFLAGS: 00210246 CPU: 0
[    1.613023] EIP is at drm_dev_register+0xe9/0x173
[    1.613257] EAX: 900a3400 EBX: 900a5000 ECX: 00000000 EDX: 00000000
[    1.613617] ESI: 820233c0 EDI: 00000000 EBP: 9343ff10 ESP: 9343fef8
[    1.613989]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[    1.614278] CR0: 80050033 CR2: 0000002c CR3: 0217e000 CR4: 000006b0
[    1.614621] Stack:
[    1.614725]  00000000 00000000 8143c57d dd700876 82100b64 000003a3 9343ff20 82100ba4
[    1.615162]  34c27b4d 82100b64 9343ff80 820b7212 939b87ac 81e79ff0 00000000 9343ff00
[    1.615595]  81049d1c 00000000 81e79ff0 00060006 81e75748 000003a3 939b87ad 00000200
[    1.616052] Call Trace:
[    1.616190]  [<8143c57d>] ? drm_dev_alloc+0x28/0x43
[    1.616435]  [<82100b64>] ? vmwgfx_init+0x65/0x65
[    1.616669]  [<82100ba4>] vgem_init+0x40/0x74
[    1.616905]  [<82100b64>] ? vmwgfx_init+0x65/0x65
[    1.617148]  [<820b7212>] do_one_initcall+0x9e/0x17a
[    1.617411]  [<81049d1c>] ? parse_args+0x1bb/0x27e
[    1.617682]  [<820b7452>] ? kernel_init_freeable+0x164/0x266
[    1.617997]  [<820b7481>] kernel_init_freeable+0x193/0x266
[    1.618287]  [<8198706a>] ? rest_init+0xa2/0xa2
[    1.618521]  [<81987072>] kernel_init+0x8/0xcb
[    1.618758]  [<8198bc77>] ret_from_fork+0x1b/0x28
[    1.618994] Code: 68 eb aa 8b 55 e8 89 d8 ff d1 85 c0 89 c7 75 59 8b 43 14 f6 80 dd 00 00 00 20 74 07 89 d8 e8 b1 10 01 00 8b 43 20 8b 53 10 8b 08 <8b> 42 2c 85 c0 75 03 8b 42 08 51 50 ff b6 d8 00 00 00 ff b6 cc
[    1.620399] EIP: [<8143c0ba>] 
[    1.620566] drm_dev_register+0xe9/0x173
[    1.620781]  SS:ESP 0068:9343fef8
[    1.620975] CR2: 000000000000002c
[    1.621149] ---[ end trace 9d22d41231e36593 ]---
[    1.621389] Kernel panic - not syncing: Fatal exception
[    1.621680] Kernel Offset: disabled

Elapsed time: 10

initrds=(
	/osimage/openwrt/openwrt-i386-2016-03-16.cgz
	/lkp/scheduled/vm-lkp-hsw01-openwrt-ia32-12/trinity-300s-openwrt-i386-2016-03-16.cgz-75f6dfe3e652e1adef8cc1b073c89f3e22103a8f-20161231-21558-vybma4-0.cgz
	/lkp/lkp/lkp-i386.cgz
	/osimage/pkg/static/trinity-i386.cgz
)

cat "${initrds[@]}" > /fs/sda5/initrd-vm-lkp-hsw01-openwrt-ia32-12

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel /pkg/linux/i386-randconfig-a0-201652/gcc-6/75f6dfe3e652e1adef8cc1b073c89f3e22103a8f/vmlinuz-4.9.0-rc8-01743-g75f6dfe
	-initrd /fs/sda5/initrd-vm-lkp-hsw01-openwrt-ia32-12
	-m 320
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-pidfile /dev/shm/kboot/pid-vm-lkp-hsw01-openwrt-ia32-12
	-serial file:/dev/shm/kboot/vm-lkp-hsw01-openwrt-ia32-12/serial
	-serial file:/dev/shm/kboot/vm-lkp-hsw01-openwrt-ia32-12/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-hsw01-openwrt-ia32-12::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-hsw01-openwrt-ia32-12/trinity-300s-openwrt-i386-2016-03-16.cgz-75f6dfe3e652e1adef8cc1b073c89f3e22103a8f-20161231-21558-vybma4-0.yaml
	ARCH=i386
	kconfig=i386-randconfig-a0-201652
	branch=linux-devel/devel-spot-201612302128
	commit=75f6dfe3e652e1adef8cc1b073c89f3e22103a8f
	BOOT_IMAGE=/pkg/linux/i386-randconfig-a0-201652/gcc-6/75f6dfe3e652e1adef8cc1b073c89f3e22103a8f/vmlinuz-4.9.0-rc8-01743-g75f6dfe
	max_uptime=1500
	RESULT_ROOT=/result/trinity/300s/vm-lkp-hsw01-openwrt-ia32/openwrt-i386-2016-03-16.cgz/i386-randconfig-a0-201652/gcc-6/75f6dfe3e652e1adef8cc1b073c89f3e22103a8f/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
