As you suggested, I added/improved support for the Davicom chip to the
tulip driver. I'm going to fix the dmfe driver when I have more time.
This patch works-for-me(TM) using a Cnet card, but it would be very
interesting to see what happens with other Davicom based cards. I think it
should work, but you never know.
/Tobias Ringstrom
diff -ru tulip.orig/eeprom.c tulip/eeprom.c
--- tulip.orig/eeprom.c Mon Jun 19 22:42:39 2000
+++ tulip/eeprom.c Tue Nov 14 01:25:29 2000
@@ -198,12 +198,23 @@
if (p[1] == 0x05) {
mtable->has_reset = i;
leaf->media = p[2] & 0x0f;
+ } else if (tp->chip_id == DM910X && p[1] == 0x80) {
+ /* Hack to ignore Davicom delay period block */
+ mtable->leafcount--;
+ count--;
+ i--;
+ leaf->leafdata = p + 2;
+ p += (p[0] & 0x3f) + 1;
+ continue;
} else if (p[1] & 1) {
mtable->has_mii = 1;
leaf->media = 11;
} else {
mtable->has_nonmii = 1;
leaf->media = p[2] & 0x0f;
+ /* Davicom's media number for 100BaseTX is
+strange */
+ if (tp->chip_id == DM910X && leaf->media == 1)
+ leaf->media = 3;
switch (leaf->media) {
case 0: new_advertise |= 0x0020; break;
case 4: new_advertise |= 0x0040; break;
diff -ru tulip.orig/timer.c tulip/timer.c
--- tulip.orig/timer.c Mon Jun 19 22:42:39 2000
+++ tulip/timer.c Tue Nov 14 00:52:18 2000
@@ -90,6 +90,7 @@
case DC21142:
case MX98713:
case COMPEX9881:
+ case DM910X:
default: {
struct medialeaf *mleaf;
unsigned char *p;
diff -ru tulip.orig/tulip.h tulip/tulip.h
--- tulip.orig/tulip.h Mon Jun 19 22:42:39 2000
+++ tulip/tulip.h Mon Nov 13 23:40:06 2000
@@ -76,6 +76,7 @@
COMET,
COMPEX9881,
I21145,
+ DM910X,
};
diff -ru tulip.orig/tulip_core.c tulip/tulip_core.c
--- tulip.orig/tulip_core.c Mon Oct 16 22:36:08 2000
+++ tulip/tulip_core.c Tue Nov 14 00:51:51 2000
@@ -147,6 +147,9 @@
{ "Intel DS21145 Tulip", 128, 0x0801fbff,
HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI | HAS_NWAY,
t21142_timer },
+ { "Davicom DM9102/DM9102A", 128, 0x0001ebef,
+ HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI,
+ tulip_timer },
{0},
};
@@ -171,8 +174,8 @@
{ 0x104A, 0x2774, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
{ 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 },
{ 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 },
- { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 },
- { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 },
+ { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
+ { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
{ 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
{0, }
};
@@ -467,7 +470,8 @@
tulip_select_media(dev, 0);
}
} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142
- || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881) {
+ || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881
+ || tp->chip_id == DM910X) {
printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
"SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
dev->name, inl(ioaddr + CSR5), inl(ioaddr + CSR12),
@@ -1333,6 +1337,7 @@
outl(0x00000004, ioaddr + CSR13);
break;
case DC21140:
+ case DM910X:
default:
if (tp->mtable)
outl(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
