Hi! See inlined some my notes.
On Wednesday 14 December 2016 13:24:51 Pavel Machek wrote:
>
> Add driver for et8ek8 sensor, found in Nokia N900 main camera. Can be
> used for taking photos in 2.5MP resolution with fcam-dev.
>
> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov...@gmail.com>
> Signed-off-by: Pavel Machek <pa...@ucw.cz>
>
> ---
> From v4 I did cleanups to coding style and removed various oddities.
>
> Exposure value is now in native units, which simplifies the code.
>
> The patch to add device tree bindings was already acked by device tree
> people.
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 2669b4b..6d01e15 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -667,6 +667,7 @@ config VIDEO_S5K5BAF
> camera sensor with an embedded SoC image signal processor.
>
> source "drivers/media/i2c/smiapp/Kconfig"
> +source "drivers/media/i2c/et8ek8/Kconfig"
>
> config VIDEO_S5C73M3
> tristate "Samsung S5C73M3 sensor support"
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 92773b2..5bc7bbe 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -2,6 +2,7 @@ msp3400-objs := msp3400-driver.o msp3400-kthreads.o
> obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
>
> obj-$(CONFIG_VIDEO_SMIAPP) += smiapp/
> +obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8/
> obj-$(CONFIG_VIDEO_CX25840) += cx25840/
> obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/
> obj-y += soc_camera/
> diff --git a/drivers/media/i2c/et8ek8/Kconfig
> b/drivers/media/i2c/et8ek8/Kconfig
> new file mode 100644
> index 0000000..1439936
> --- /dev/null
> +++ b/drivers/media/i2c/et8ek8/Kconfig
> @@ -0,0 +1,6 @@
> +config VIDEO_ET8EK8
> + tristate "ET8EK8 camera sensor support"
> + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> + ---help---
> + This is a driver for the Toshiba ET8EK8 5 MP camera sensor.
> + It is used for example in Nokia N900 (RX-51).
> diff --git a/drivers/media/i2c/et8ek8/Makefile
> b/drivers/media/i2c/et8ek8/Makefile
> new file mode 100644
> index 0000000..66d1b7d
> --- /dev/null
> +++ b/drivers/media/i2c/et8ek8/Makefile
> @@ -0,0 +1,2 @@
> +et8ek8-objs += et8ek8_mode.o et8ek8_driver.o
> +obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8.o
> diff --git a/drivers/media/i2c/et8ek8/et8ek8_driver.c
> b/drivers/media/i2c/et8ek8/et8ek8_driver.c
> new file mode 100644
> index 0000000..4a638f8
> --- /dev/null
> +++ b/drivers/media/i2c/et8ek8/et8ek8_driver.c
> @@ -0,0 +1,1515 @@
> +/*
> + * et8ek8_driver.c
> + *
> + * Copyright (C) 2008 Nokia Corporation
> + *
> + * Contact: Sakari Ailus <sakari.ai...@iki.fi>
> + * Tuukka Toivonen <tuukka...@gmail.com>
> + * Pavel Machek <pa...@ucw.cz>
> + *
> + * Based on code from Toni Leinonen <toni.leino...@offcode.fi>.
> + *
> + * This driver is based on the Micron MT9T012 camera imager driver
> + * (C) Texas Instruments.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/sort.h>
> +#include <linux/v4l2-mediabus.h>
> +
> +#include <media/media-entity.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-subdev.h>
> +
> +#include "et8ek8_reg.h"
> +
> +#define ET8EK8_NAME "et8ek8"
> +#define ET8EK8_PRIV_MEM_SIZE 128
> +#define ET8EK8_MAX_MSG 48
> +
> +struct et8ek8_sensor {
> + struct v4l2_subdev subdev;
> + struct media_pad pad;
> + struct v4l2_mbus_framefmt format;
> + struct gpio_desc *reset;
> + struct regulator *vana;
> + struct clk *ext_clk;
> + u32 xclk_freq;
> +
> + u16 version;
> +
> + struct v4l2_ctrl_handler ctrl_handler;
> + struct v4l2_ctrl *exposure;
> + struct v4l2_ctrl *pixel_rate;
> + struct et8ek8_reglist *current_reglist;
> +
> + u8 priv_mem[ET8EK8_PRIV_MEM_SIZE];
> +
> + struct mutex power_lock;
> + int power_count;
> +};
> +
> +#define to_et8ek8_sensor(sd) container_of(sd, struct et8ek8_sensor, subdev)
> +
> +enum et8ek8_versions {
> + ET8EK8_REV_1 = 0x0001,
> + ET8EK8_REV_2,
> +};
> +
> +/*
> + * This table describes what should be written to the sensor register
> + * for each gain value. The gain(index in the table) is in terms of
> + * 0.1EV, i.e. 10 indexes in the table give 2 time more gain [0] in
> + * the *analog gain, [1] in the digital gain
> + *
> + * Analog gain [dB] = 20*log10(regvalue/32); 0x20..0x100
> + */
> +static struct et8ek8_gain {
> + u16 analog;
> + u16 digital;
> +} const et8ek8_gain_table[] = {
> + { 32, 0}, /* x1 */
> + { 34, 0},
> + { 37, 0},
> + { 39, 0},
> + { 42, 0},
> + { 45, 0},
> + { 49, 0},
> + { 52, 0},
> + { 56, 0},
> + { 60, 0},
> + { 64, 0}, /* x2 */
> + { 69, 0},
> + { 74, 0},
> + { 79, 0},
> + { 84, 0},
> + { 91, 0},
> + { 97, 0},
> + {104, 0},
> + {111, 0},
> + {119, 0},
> + {128, 0}, /* x4 */
> + {137, 0},
> + {147, 0},
> + {158, 0},
> + {169, 0},
> + {181, 0},
> + {194, 0},
> + {208, 0},
> + {223, 0},
> + {239, 0},
> + {256, 0}, /* x8 */
> + {256, 73},
> + {256, 152},
> + {256, 236},
> + {256, 327},
> + {256, 424},
> + {256, 528},
> + {256, 639},
> + {256, 758},
> + {256, 886},
> + {256, 1023}, /* x16 */
> +};
> +
> +/* Register definitions */
> +#define REG_REVISION_NUMBER_L 0x1200
> +#define REG_REVISION_NUMBER_H 0x1201
> +
> +#define PRIV_MEM_START_REG 0x0008
> +#define PRIV_MEM_WIN_SIZE 8
> +
> +#define ET8EK8_I2C_DELAY 3 /* msec delay b/w accesses */
> +
> +#define USE_CRC 1
> +
> +/*
> + * Register access helpers
> + *
> + * Read a 8/16/32-bit i2c register. The value is returned in 'val'.
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static int et8ek8_i2c_read_reg(struct i2c_client *client, u16 data_length,
> + u16 reg, u32 *val)
> +{
> + int r;
> + struct i2c_msg msg;
> + unsigned char data[4];
> +
> + if (!client->adapter)
> + return -ENODEV;
> + if (data_length != ET8EK8_REG_8BIT && data_length != ET8EK8_REG_16BIT)
> + return -EINVAL;
> +
> + msg.addr = client->addr;
> + msg.flags = 0;
> + msg.len = 2;
> + msg.buf = data;
> +
> + /* high byte goes out first */
> + data[0] = (u8) (reg >> 8);
> + data[1] = (u8) (reg & 0xff);
> + r = i2c_transfer(client->adapter, &msg, 1);
> + if (r < 0)
> + goto err;
> +
> + msg.len = data_length;
> + msg.flags = I2C_M_RD;
> + r = i2c_transfer(client->adapter, &msg, 1);
> + if (r < 0)
> + goto err;
> +
> + *val = 0;
> + /* high byte comes first */
> + if (data_length == ET8EK8_REG_8BIT)
> + *val = data[0];
> + else
> + *val = (data[0] << 8) + data[1];
> +
> + return 0;
> +
> +err:
> + dev_err(&client->dev, "read from offset 0x%x error %d\n", reg, r);
> +
> + return r;
> +}
> +
> +static void et8ek8_i2c_create_msg(struct i2c_client *client, u16 len, u16
> reg,
> + u32 val, struct i2c_msg *msg,
> + unsigned char *buf)
> +{
> + msg->addr = client->addr;
> + msg->flags = 0; /* Write */
> + msg->len = 2 + len;
> + msg->buf = buf;
> +
> + /* high byte goes out first */
> + buf[0] = (u8) (reg >> 8);
> + buf[1] = (u8) (reg & 0xff);
> +
> + switch (len) {
> + case ET8EK8_REG_8BIT:
> + buf[2] = (u8) (val) & 0xff;
> + break;
> + case ET8EK8_REG_16BIT:
> + buf[2] = (u8) (val >> 8) & 0xff;
> + buf[3] = (u8) (val & 0xff);
> + break;
> + default:
> + WARN_ONCE(1, ET8EK8_NAME ": %s: invalid message length.\n",
> + __func__);
dev_warn_once()
> + }
> +}
> +
> +/*
> + * A buffered write method that puts the wanted register write
> + * commands in a message list and passes the list to the i2c framework
> + */
> +static int et8ek8_i2c_buffered_write_regs(struct i2c_client *client,
> + const struct et8ek8_reg *wnext,
> + int cnt)
> +{
> + struct i2c_msg msg[ET8EK8_MAX_MSG];
> + unsigned char data[ET8EK8_MAX_MSG][6];
> + int wcnt = 0;
> + u16 reg, data_length;
> + u32 val;
> +
> + if (WARN_ONCE(cnt > ET8EK8_MAX_MSG,
> + ET8EK8_NAME ": %s: too many messages.\n", __func__)) {
Maybe replace it with dev_warn_once() too? That condition in WARN_ONCE
does not look nice...
> + return -EINVAL;
> + }
> +
> + /* Create new write messages for all writes */
> + while (wcnt < cnt) {
> + data_length = wnext->type;
> + reg = wnext->reg;
> + val = wnext->val;
> + wnext++;
> +
> + et8ek8_i2c_create_msg(client, data_length, reg,
> + val, &msg[wcnt], &data[wcnt][0]);
> +
> + /* Update write count */
> + wcnt++;
> + }
> +
> + /* Now we send everything ... */
> + return i2c_transfer(client->adapter, msg, wcnt);
> +}
> +
> +/*
> + * Write a list of registers to i2c device.
> + *
> + * The list of registers is terminated by ET8EK8_REG_TERM.
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static int et8ek8_i2c_write_regs(struct i2c_client *client,
> + const struct et8ek8_reg *regs)
> +{
> + int r, cnt = 0;
> + const struct et8ek8_reg *next;
> +
> + if (!client->adapter)
> + return -ENODEV;
> +
> + if (!regs)
> + return -EINVAL;
> +
> + /* Initialize list pointers to the start of the list */
> + next = regs;
> +
> + do {
> + /*
> + * We have to go through the list to figure out how
> + * many regular writes we have in a row
> + */
> + while (next->type != ET8EK8_REG_TERM &&
> + next->type != ET8EK8_REG_DELAY) {
> + /*
> + * Here we check that the actual length fields
> + * are valid
> + */
> + if (WARN(next->type != ET8EK8_REG_8BIT &&
> + next->type != ET8EK8_REG_16BIT,
> + "Invalid type = %d", next->type)) {
dev_warn()
> + return -EINVAL;
> + }
> + /*
> + * Increment count of successive writes and
> + * read pointer
> + */
> + cnt++;
> + next++;
> + }
> +
> + /* Now we start writing ... */
> + r = et8ek8_i2c_buffered_write_regs(client, regs, cnt);
> +
> + /* ... and then check that everything was OK */
> + if (r < 0) {
> + dev_err(&client->dev, "i2c transfer error!\n");
> + return r;
> + }
> +
> + /*
> + * If we ran into a sleep statement when going through
> + * the list, this is where we snooze for the required time
> + */
> + if (next->type == ET8EK8_REG_DELAY) {
> + msleep(next->val);
> + /*
> + * ZZZ ...
> + * Update list pointers and cnt and start over ...
> + */
> + next++;
> + regs = next;
> + cnt = 0;
> + }
> + } while (next->type != ET8EK8_REG_TERM);
> +
> + return 0;
> +}
> +
> +/*
> + * Write to a 8/16-bit register.
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static int et8ek8_i2c_write_reg(struct i2c_client *client, u16 data_length,
> + u16 reg, u32 val)
> +{
> + int r;
> + struct i2c_msg msg;
> + unsigned char data[6];
> +
> + if (!client->adapter)
> + return -ENODEV;
> + if (data_length != ET8EK8_REG_8BIT && data_length != ET8EK8_REG_16BIT)
> + return -EINVAL;
> +
> + et8ek8_i2c_create_msg(client, data_length, reg, val, &msg, data);
> +
> + r = i2c_transfer(client->adapter, &msg, 1);
> + if (r < 0)
> + dev_err(&client->dev,
> + "wrote 0x%x to offset 0x%x error %d\n", val, reg, r);
> + else
> + r = 0; /* on success i2c_transfer() returns messages trasfered
> */
> +
> + return r;
> +}
> +
> +static struct et8ek8_reglist *et8ek8_reglist_find_type(
> + struct et8ek8_meta_reglist *meta,
> + u16 type)
> +{
> + struct et8ek8_reglist **next = &meta->reglist[0].ptr;
> +
> + while (*next) {
> + if ((*next)->type == type)
> + return *next;
> +
> + next++;
> + }
> +
> + return NULL;
> +}
> +
> +static int et8ek8_i2c_reglist_find_write(struct i2c_client *client,
> + struct et8ek8_meta_reglist *meta,
> + u16 type)
> +{
> + struct et8ek8_reglist *reglist;
> +
> + reglist = et8ek8_reglist_find_type(meta, type);
> + if (!reglist)
> + return -EINVAL;
> +
> + return et8ek8_i2c_write_regs(client, reglist->regs);
> +}
> +
> +static struct et8ek8_reglist **et8ek8_reglist_first(
> + struct et8ek8_meta_reglist *meta)
> +{
> + return &meta->reglist[0].ptr;
> +}
Above code looks like re-implementation of linked-list. Does not kernel
already provide some?
> +static void et8ek8_reglist_to_mbus(const struct et8ek8_reglist *reglist,
> + struct v4l2_mbus_framefmt *fmt)
> +{
> + fmt->width = reglist->mode.window_width;
> + fmt->height = reglist->mode.window_height;
> + fmt->code = reglist->mode.bus_format;
> +}
> +
> +static struct et8ek8_reglist *et8ek8_reglist_find_mode_fmt(
> + struct et8ek8_meta_reglist *meta,
> + struct v4l2_mbus_framefmt *fmt)
> +{
> + struct et8ek8_reglist **list = et8ek8_reglist_first(meta);
> + struct et8ek8_reglist *best_match = NULL;
> + struct et8ek8_reglist *best_other = NULL;
> + struct v4l2_mbus_framefmt format;
> + unsigned int max_dist_match = (unsigned int)-1;
> + unsigned int max_dist_other = (unsigned int)-1;
> +
> + /*
> + * Find the mode with the closest image size. The distance between
> + * image sizes is the size in pixels of the non-overlapping regions
> + * between the requested size and the frame-specified size.
> + *
> + * Store both the closest mode that matches the requested format, and
> + * the closest mode for all other formats. The best match is returned
> + * if found, otherwise the best mode with a non-matching format is
> + * returned.
> + */
> + for (; *list; list++) {
> + unsigned int dist;
> +
> + if ((*list)->type != ET8EK8_REGLIST_MODE)
> + continue;
> +
> + et8ek8_reglist_to_mbus(*list, &format);
> +
> + dist = min(fmt->width, format.width)
> + * min(fmt->height, format.height);
> + dist = format.width * format.height
> + + fmt->width * fmt->height - 2 * dist;
> +
> +
> + if (fmt->code == format.code) {
> + if (dist < max_dist_match || !best_match) {
> + best_match = *list;
> + max_dist_match = dist;
> + }
> + } else {
> + if (dist < max_dist_other || !best_other) {
> + best_other = *list;
> + max_dist_other = dist;
> + }
> + }
> + }
> +
> + return best_match ? best_match : best_other;
> +}
> +
> +#define TIMEPERFRAME_AVG_FPS(t)
> \
> + (((t).denominator + ((t).numerator >> 1)) / (t).numerator)
> +
> +static struct et8ek8_reglist *et8ek8_reglist_find_mode_ival(
> + struct et8ek8_meta_reglist *meta,
> + struct et8ek8_reglist *current_reglist,
> + struct v4l2_fract *timeperframe)
> +{
> + int fps = TIMEPERFRAME_AVG_FPS(*timeperframe);
> + struct et8ek8_reglist **list = et8ek8_reglist_first(meta);
> + struct et8ek8_mode *current_mode = ¤t_reglist->mode;
> +
> + for (; *list; list++) {
> + struct et8ek8_mode *mode = &(*list)->mode;
> +
> + if ((*list)->type != ET8EK8_REGLIST_MODE)
> + continue;
> +
> + if (mode->window_width != current_mode->window_width ||
> + mode->window_height != current_mode->window_height)
> + continue;
> +
> + if (TIMEPERFRAME_AVG_FPS(mode->timeperframe) == fps)
> + return *list;
> + }
> +
> + return NULL;
> +}
> +
> +static int et8ek8_reglist_cmp(const void *a, const void *b)
> +{
> + const struct et8ek8_reglist **list1 = (const struct et8ek8_reglist **)a,
> + **list2 = (const struct et8ek8_reglist **)b;
> +
> + /* Put real modes in the beginning. */
> + if ((*list1)->type == ET8EK8_REGLIST_MODE &&
> + (*list2)->type != ET8EK8_REGLIST_MODE)
> + return -1;
> + if ((*list1)->type != ET8EK8_REGLIST_MODE &&
> + (*list2)->type == ET8EK8_REGLIST_MODE)
> + return 1;
> +
> + /* Descending width. */
> + if ((*list1)->mode.window_width > (*list2)->mode.window_width)
> + return -1;
> + if ((*list1)->mode.window_width < (*list2)->mode.window_width)
> + return 1;
> +
> + if ((*list1)->mode.window_height > (*list2)->mode.window_height)
> + return -1;
> + if ((*list1)->mode.window_height < (*list2)->mode.window_height)
> + return 1;
> +
> + return 0;
> +}
> +
> +static int et8ek8_reglist_import(struct i2c_client *client,
> + struct et8ek8_meta_reglist *meta)
> +{
> + int nlists = 0, i;
> +
> + dev_info(&client->dev, "meta_reglist version %s\n", meta->version);
> +
> + while (meta->reglist[nlists].ptr)
> + nlists++;
> +
> + if (!nlists)
> + return -EINVAL;
> +
> + sort(&meta->reglist[0].ptr, nlists, sizeof(meta->reglist[0].ptr),
> + et8ek8_reglist_cmp, NULL);
> +
> + i = nlists;
> + nlists = 0;
> +
> + while (i--) {
> + struct et8ek8_reglist *list;
> +
> + list = meta->reglist[nlists].ptr;
> +
> + dev_dbg(&client->dev,
> + "%s: type %d\tw %d\th %d\tfmt %x\tival %d/%d\tptr %p\n",
> + __func__,
> + list->type,
> + list->mode.window_width, list->mode.window_height,
> + list->mode.bus_format,
> + list->mode.timeperframe.numerator,
> + list->mode.timeperframe.denominator,
> + (void *)meta->reglist[nlists].ptr);
> +
> + nlists++;
> + }
> +
> + return 0;
> +}
> +
> +/* Called to change the V4L2 gain control value. This function
> + * rounds and clamps the given value and updates the V4L2 control value.
> + * If power is on, also updates the sensor analog and digital gains.
> + * gain is in 0.1 EV (exposure value) units.
> + */
> +static int et8ek8_set_gain(struct et8ek8_sensor *sensor, s32 gain)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
> + struct et8ek8_gain new;
> + int r;
> +
> + new = et8ek8_gain_table[gain];
> +
> + /* FIXME: optimise I2C writes! */
Is this FIMXE still valid?
> + r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT,
> + 0x124a, new.analog >> 8);
> + if (r)
> + return r;
> + r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT,
> + 0x1249, new.analog & 0xff);
> + if (r)
> + return r;
> +
> + r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT,
> + 0x124d, new.digital >> 8);
> + if (r)
> + return r;
> + r = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT,
> + 0x124c, new.digital & 0xff);
> +
> + return r;
> +}
> +
> +static int et8ek8_set_test_pattern(struct et8ek8_sensor *sensor, s32 mode)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
> + int cbh_mode, cbv_mode, tp_mode, din_sw, r1420, rval;
> +
> + /* Values for normal mode */
> + cbh_mode = 0;
> + cbv_mode = 0;
> + tp_mode = 0;
> + din_sw = 0x00;
> + r1420 = 0xF0;
> +
> + if (mode) {
> + /* Test pattern mode */
> + if (mode < 5) {
> + cbh_mode = 1;
> + cbv_mode = 1;
> + tp_mode = mode + 3;
> + } else {
> + cbh_mode = 0;
> + cbv_mode = 0;
> + tp_mode = mode - 4 + 3;
> + }
> +
> + din_sw = 0x01;
> + r1420 = 0xE0;
> + }
> +
> + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x111B,
> + tp_mode << 4);
> + if (rval)
> + return rval;
> +
> + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1121,
> + cbh_mode << 7);
> + if (rval)
> + return rval;
> +
> + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1124,
> + cbv_mode << 7);
> + if (rval)
> + return rval;
> +
> + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x112C, din_sw);
> + if (rval)
> + return rval;
> +
> + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1420, r1420);
> + return rval;
> +}
> +
> +/*
> -----------------------------------------------------------------------------
> + * V4L2 controls
> + */
> +
> +static int et8ek8_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct et8ek8_sensor *sensor =
> + container_of(ctrl->handler, struct et8ek8_sensor, ctrl_handler);
> +
> + switch (ctrl->id) {
> + case V4L2_CID_GAIN:
> + return et8ek8_set_gain(sensor, ctrl->val);
> +
> + case V4L2_CID_EXPOSURE:
> + {
> + int rows;
> + struct i2c_client *client =
> v4l2_get_subdevdata(&sensor->subdev);
> + rows = ctrl->val;
> + return et8ek8_i2c_write_reg(client, ET8EK8_REG_16BIT, 0x1243,
> + swab16(rows));
> + }
> +
> + case V4L2_CID_TEST_PATTERN:
> + return et8ek8_set_test_pattern(sensor, ctrl->val);
> +
> + case V4L2_CID_PIXEL_RATE:
> + return 0;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct v4l2_ctrl_ops et8ek8_ctrl_ops = {
> + .s_ctrl = et8ek8_set_ctrl,
> +};
> +
> +static const char * const et8ek8_test_pattern_menu[] = {
> + "Normal",
> + "Vertical colorbar",
> + "Horizontal colorbar",
> + "Scale",
> + "Ramp",
> + "Small vertical colorbar",
> + "Small horizontal colorbar",
> + "Small scale",
> + "Small ramp",
> +};
> +
> +static int et8ek8_init_controls(struct et8ek8_sensor *sensor)
> +{
> + s32 max_rows;
> +
> + v4l2_ctrl_handler_init(&sensor->ctrl_handler, 4);
> +
> + /* V4L2_CID_GAIN */
> + v4l2_ctrl_new_std(&sensor->ctrl_handler, &et8ek8_ctrl_ops,
> + V4L2_CID_GAIN, 0, ARRAY_SIZE(et8ek8_gain_table) - 1,
> + 1, 0);
> +
> + max_rows = sensor->current_reglist->mode.max_exp;
> + {
> + u32 min = 1, max = max_rows;
> +
> + sensor->exposure =
> + v4l2_ctrl_new_std(&sensor->ctrl_handler,
> &et8ek8_ctrl_ops,
> + V4L2_CID_EXPOSURE, min, max, min,
> max);
> + }
> +
> + /* V4L2_CID_PIXEL_RATE */
> + sensor->pixel_rate =
> + v4l2_ctrl_new_std(&sensor->ctrl_handler, &et8ek8_ctrl_ops,
> + V4L2_CID_PIXEL_RATE, 1, INT_MAX, 1, 1);
> +
> + /* V4L2_CID_TEST_PATTERN */
> + v4l2_ctrl_new_std_menu_items(&sensor->ctrl_handler,
> + &et8ek8_ctrl_ops, V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(et8ek8_test_pattern_menu) - 1,
> + 0, 0, et8ek8_test_pattern_menu);
> +
> + if (sensor->ctrl_handler.error)
> + return sensor->ctrl_handler.error;
> +
> + sensor->subdev.ctrl_handler = &sensor->ctrl_handler;
> +
> + return 0;
> +}
> +
> +static void et8ek8_update_controls(struct et8ek8_sensor *sensor)
> +{
> + struct v4l2_ctrl *ctrl;
> + struct et8ek8_mode *mode = &sensor->current_reglist->mode;
> +
> + u32 min, max, pixel_rate;
> + static const int S = 8;
> +
> + ctrl = sensor->exposure;
> +
> + min = 1;
> + max = mode->max_exp;
> +
> + /*
> + * Calculate average pixel clock per line. Assume buffers can spread
> + * the data over horizontal blanking time. Rounding upwards.
> + * Formula taken from stock Nokia N900 kernel.
> + */
> + pixel_rate = ((mode->pixel_clock + (1 << S) - 1) >> S) + mode->width;
> + pixel_rate = mode->window_width * (pixel_rate - 1) / mode->width;
> +
> + __v4l2_ctrl_modify_range(ctrl, min, max, min, max);
> + __v4l2_ctrl_s_ctrl_int64(sensor->pixel_rate, pixel_rate << S);
> +}
> +
> +static int et8ek8_configure(struct et8ek8_sensor *sensor)
> +{
> + struct v4l2_subdev *subdev = &sensor->subdev;
> + struct i2c_client *client = v4l2_get_subdevdata(subdev);
> + int rval;
> +
> + rval = et8ek8_i2c_write_regs(client, sensor->current_reglist->regs);
> + if (rval)
> + goto fail;
> +
> + /* Controls set while the power to the sensor is turned off are saved
> + * but not applied to the hardware. Now that we're about to start
> + * streaming apply all the current values to the hardware.
> + */
> + rval = v4l2_ctrl_handler_setup(&sensor->ctrl_handler);
> + if (rval)
> + goto fail;
> +
> + return 0;
> +
> +fail:
> + dev_err(&client->dev, "sensor configuration failed\n");
> +
> + return rval;
> +}
> +
> +static int et8ek8_stream_on(struct et8ek8_sensor *sensor)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
> +
> + return et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1252, 0xb0);
> +}
> +
> +static int et8ek8_stream_off(struct et8ek8_sensor *sensor)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
> +
> + return et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1252, 0x30);
> +}
> +
> +static int et8ek8_s_stream(struct v4l2_subdev *subdev, int streaming)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> + int ret;
> +
> + if (!streaming)
> + return et8ek8_stream_off(sensor);
> +
> + ret = et8ek8_configure(sensor);
> + if (ret < 0)
> + return ret;
> +
> + return et8ek8_stream_on(sensor);
> +}
> +
> +/* --------------------------------------------------------------------------
> + * V4L2 subdev operations
> + */
> +
> +static int et8ek8_power_off(struct et8ek8_sensor *sensor)
> +{
> + gpiod_set_value(sensor->reset, 0);
> + udelay(1);
> +
> + clk_disable_unprepare(sensor->ext_clk);
> +
> + return regulator_disable(sensor->vana);
> +}
> +
> +static int et8ek8_power_on(struct et8ek8_sensor *sensor)
> +{
> + struct v4l2_subdev *subdev = &sensor->subdev;
> + struct i2c_client *client = v4l2_get_subdevdata(subdev);
> + unsigned int xclk_freq;
> + int val, rval;
> +
> + rval = regulator_enable(sensor->vana);
> + if (rval) {
> + dev_err(&client->dev, "failed to enable vana regulator\n");
> + return rval;
> + }
> +
> + if (sensor->current_reglist)
> + xclk_freq = sensor->current_reglist->mode.ext_clock;
> + else
> + xclk_freq = sensor->xclk_freq;
> +
> + rval = clk_set_rate(sensor->ext_clk, xclk_freq);
> + if (rval < 0) {
> + dev_err(&client->dev, "unable to set extclk clock freq to %u\n",
> + xclk_freq);
> + goto out;
> + }
> + rval = clk_prepare_enable(sensor->ext_clk);
> + if (rval < 0) {
> + dev_err(&client->dev, "failed to enable extclk\n");
> + goto out;
> + }
> +
> + if (rval)
> + goto out;
> +
> + udelay(10); /* I wish this is a good value */
> +
> + gpiod_set_value(sensor->reset, 1);
> +
> + msleep(5000 * 1000 / xclk_freq + 1); /* Wait 5000 cycles */
> +
> + rval = et8ek8_i2c_reglist_find_write(client, &meta_reglist,
> + ET8EK8_REGLIST_POWERON);
> + if (rval)
> + goto out;
> +
> +#ifdef USE_CRC
> + rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT, 0x1263, &val);
> + if (rval)
> + goto out;
> +#if USE_CRC /* TODO get crc setting from DT */
> + val |= BIT(4);
> +#else
> + val &= ~BIT(4);
> +#endif
> + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x1263, val);
> + if (rval)
> + goto out;
> +#endif
USE_CRC is defined to 1. Do we need that #ifdef check at all?
What with above TODO?
> +
> +out:
> + if (rval)
> + et8ek8_power_off(sensor);
> +
> + return rval;
> +}
> +
> +/* --------------------------------------------------------------------------
> + * V4L2 subdev video operations
> + */
> +#define MAX_FMTS 4
> +static int et8ek8_enum_mbus_code(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + struct et8ek8_reglist **list =
> + et8ek8_reglist_first(&meta_reglist);
> + u32 pixelformat[MAX_FMTS];
> + int npixelformat = 0;
> +
> + if (code->index >= MAX_FMTS)
> + return -EINVAL;
> +
> + for (; *list; list++) {
> + struct et8ek8_mode *mode = &(*list)->mode;
> + int i;
> +
> + if ((*list)->type != ET8EK8_REGLIST_MODE)
> + continue;
> +
> + for (i = 0; i < npixelformat; i++) {
> + if (pixelformat[i] == mode->bus_format)
> + break;
> + }
> + if (i != npixelformat)
> + continue;
> +
> + if (code->index == npixelformat) {
> + code->code = mode->bus_format;
> + return 0;
> + }
> +
> + pixelformat[npixelformat] = mode->bus_format;
> + npixelformat++;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int et8ek8_enum_frame_size(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + struct et8ek8_reglist **list =
> + et8ek8_reglist_first(&meta_reglist);
> + struct v4l2_mbus_framefmt format;
> + int cmp_width = INT_MAX;
> + int cmp_height = INT_MAX;
> + int index = fse->index;
> +
> + for (; *list; list++) {
> + if ((*list)->type != ET8EK8_REGLIST_MODE)
> + continue;
> +
> + et8ek8_reglist_to_mbus(*list, &format);
> + if (fse->code != format.code)
> + continue;
> +
> + /* Assume that the modes are grouped by frame size. */
> + if (format.width == cmp_width && format.height == cmp_height)
> + continue;
> +
> + cmp_width = format.width;
> + cmp_height = format.height;
> +
> + if (index-- == 0) {
> + fse->min_width = format.width;
> + fse->min_height = format.height;
> + fse->max_width = format.width;
> + fse->max_height = format.height;
> + return 0;
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int et8ek8_enum_frame_ival(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_interval_enum *fie)
> +{
> + struct et8ek8_reglist **list =
> + et8ek8_reglist_first(&meta_reglist);
> + struct v4l2_mbus_framefmt format;
> + int index = fie->index;
> +
> + for (; *list; list++) {
> + struct et8ek8_mode *mode = &(*list)->mode;
> +
> + if ((*list)->type != ET8EK8_REGLIST_MODE)
> + continue;
> +
> + et8ek8_reglist_to_mbus(*list, &format);
> + if (fie->code != format.code)
> + continue;
> +
> + if (fie->width != format.width || fie->height != format.height)
> + continue;
> +
> + if (index-- == 0) {
> + fie->interval = mode->timeperframe;
> + return 0;
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> +static struct v4l2_mbus_framefmt *
> +__et8ek8_get_pad_format(struct et8ek8_sensor *sensor,
> + struct v4l2_subdev_pad_config *cfg,
> + unsigned int pad, enum v4l2_subdev_format_whence which)
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> + return v4l2_subdev_get_try_format(&sensor->subdev, cfg, pad);
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &sensor->format;
> + default:
> + return NULL;
> + }
> +}
> +
> +static int et8ek8_get_pad_format(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> + struct v4l2_mbus_framefmt *format;
> +
> + format = __et8ek8_get_pad_format(sensor, cfg, fmt->pad, fmt->which);
> + if (!format)
> + return -EINVAL;
> +
> + fmt->format = *format;
> +
> + return 0;
> +}
> +
> +static int et8ek8_set_pad_format(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> + struct v4l2_mbus_framefmt *format;
> + struct et8ek8_reglist *reglist;
> +
> + format = __et8ek8_get_pad_format(sensor, cfg, fmt->pad, fmt->which);
> + if (!format)
> + return -EINVAL;
> +
> + reglist = et8ek8_reglist_find_mode_fmt(&meta_reglist, &fmt->format);
> + et8ek8_reglist_to_mbus(reglist, &fmt->format);
> + *format = fmt->format;
> +
> + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
> + sensor->current_reglist = reglist;
> + et8ek8_update_controls(sensor);
> + }
> +
> + return 0;
> +}
> +
> +static int et8ek8_get_frame_interval(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_frame_interval *fi)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> +
> + memset(fi, 0, sizeof(*fi));
> + fi->interval = sensor->current_reglist->mode.timeperframe;
> +
> + return 0;
> +}
> +
> +static int et8ek8_set_frame_interval(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_frame_interval *fi)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> + struct et8ek8_reglist *reglist;
> +
> + reglist = et8ek8_reglist_find_mode_ival(&meta_reglist,
> + sensor->current_reglist,
> + &fi->interval);
> +
> + if (!reglist)
> + return -EINVAL;
> +
> + if (sensor->current_reglist->mode.ext_clock != reglist->mode.ext_clock)
> + return -EINVAL;
> +
> + sensor->current_reglist = reglist;
> + et8ek8_update_controls(sensor);
> +
> + return 0;
> +}
> +
> +static int et8ek8_g_priv_mem(struct v4l2_subdev *subdev)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> + struct i2c_client *client = v4l2_get_subdevdata(subdev);
> + unsigned int length = ET8EK8_PRIV_MEM_SIZE;
> + unsigned int offset = 0;
> + u8 *ptr = sensor->priv_mem;
> + int rval = 0;
> +
> + /* Read the EEPROM window-by-window, each window 8 bytes */
> + do {
> + u8 buffer[PRIV_MEM_WIN_SIZE];
> + struct i2c_msg msg;
> + int bytes, i;
> + int ofs;
> +
> + /* Set the current window */
> + rval = et8ek8_i2c_write_reg(client, ET8EK8_REG_8BIT, 0x0001,
> + 0xe0 | (offset >> 3));
> + if (rval < 0)
> + return rval;
> +
> + /* Wait for status bit */
> + for (i = 0; i < 1000; ++i) {
> + u32 status;
> +
> + rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT,
> + 0x0003, &status);
> + if (rval < 0)
> + return rval;
> + if (!(status & 0x08))
> + break;
> + usleep_range(1000, 2000);
> + };
> +
> + if (i == 1000)
> + return -EIO;
> +
> + /* Read window, 8 bytes at once, and copy to user space */
> + ofs = offset & 0x07; /* Offset within this window */
> + bytes = length + ofs > 8 ? 8-ofs : length;
> + msg.addr = client->addr;
> + msg.flags = 0;
> + msg.len = 2;
> + msg.buf = buffer;
> + ofs += PRIV_MEM_START_REG;
> + buffer[0] = (u8)(ofs >> 8);
> + buffer[1] = (u8)(ofs & 0xFF);
> +
> + rval = i2c_transfer(client->adapter, &msg, 1);
> + if (rval < 0)
> + return rval;
> +
> + mdelay(ET8EK8_I2C_DELAY);
> + msg.addr = client->addr;
> + msg.len = bytes;
> + msg.flags = I2C_M_RD;
> + msg.buf = buffer;
> + memset(buffer, 0, sizeof(buffer));
> +
> + rval = i2c_transfer(client->adapter, &msg, 1);
> + if (rval < 0)
> + return rval;
> +
> + rval = 0;
> + memcpy(ptr, buffer, bytes);
> +
> + length -= bytes;
> + offset += bytes;
> + ptr += bytes;
> + } while (length > 0);
> +
> + return rval;
> +}
> +
> +static int et8ek8_dev_init(struct v4l2_subdev *subdev)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> + struct i2c_client *client = v4l2_get_subdevdata(subdev);
> + int rval, rev_l, rev_h;
> +
> + rval = et8ek8_power_on(sensor);
> + if (rval) {
> + dev_err(&client->dev, "could not power on\n");
> + return rval;
> + }
> +
> + rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT,
> + REG_REVISION_NUMBER_L, &rev_l);
> + if (!rval)
> + rval = et8ek8_i2c_read_reg(client, ET8EK8_REG_8BIT,
> + REG_REVISION_NUMBER_H, &rev_h);
> + if (rval) {
> + dev_err(&client->dev, "no et8ek8 sensor detected\n");
> + goto out_poweroff;
> + }
> +
> + sensor->version = (rev_h << 8) + rev_l;
> + if (sensor->version != ET8EK8_REV_1 && sensor->version != ET8EK8_REV_2)
> + dev_info(&client->dev,
> + "unknown version 0x%x detected, continuing anyway\n",
> + sensor->version);
> +
> + rval = et8ek8_reglist_import(client, &meta_reglist);
> + if (rval) {
> + dev_err(&client->dev,
> + "invalid register list %s, import failed\n",
> + ET8EK8_NAME);
> + goto out_poweroff;
> + }
> +
> + sensor->current_reglist = et8ek8_reglist_find_type(&meta_reglist,
> + ET8EK8_REGLIST_MODE);
> + if (!sensor->current_reglist) {
> + dev_err(&client->dev,
> + "invalid register list %s, no mode found\n",
> + ET8EK8_NAME);
> + rval = -ENODEV;
> + goto out_poweroff;
> + }
> +
> + et8ek8_reglist_to_mbus(sensor->current_reglist, &sensor->format);
> +
> + rval = et8ek8_i2c_reglist_find_write(client, &meta_reglist,
> + ET8EK8_REGLIST_POWERON);
> + if (rval) {
> + dev_err(&client->dev,
> + "invalid register list %s, no POWERON mode found\n",
> + ET8EK8_NAME);
> + goto out_poweroff;
> + }
> + rval = et8ek8_stream_on(sensor); /* Needed to be able to read EEPROM */
> + if (rval)
> + goto out_poweroff;
> + rval = et8ek8_g_priv_mem(subdev);
> + if (rval)
> + dev_warn(&client->dev,
> + "can not read OTP (EEPROM) memory from sensor\n");
> + rval = et8ek8_stream_off(sensor);
> + if (rval)
> + goto out_poweroff;
> +
> + rval = et8ek8_power_off(sensor);
> + if (rval)
> + goto out_poweroff;
> +
> + return 0;
> +
> +out_poweroff:
> + et8ek8_power_off(sensor);
> +
> + return rval;
> +}
> +
> +/* --------------------------------------------------------------------------
> + * sysfs attributes
> + */
> +static ssize_t
> +et8ek8_priv_mem_read(struct device *dev, struct device_attribute *attr,
> + char *buf)
> +{
> + struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev));
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> +
> +#if PAGE_SIZE < ET8EK8_PRIV_MEM_SIZE
> +#error PAGE_SIZE too small!
> +#endif
> +
> + memcpy(buf, sensor->priv_mem, ET8EK8_PRIV_MEM_SIZE);
> +
> + return ET8EK8_PRIV_MEM_SIZE;
> +}
> +static DEVICE_ATTR(priv_mem, S_IRUGO, et8ek8_priv_mem_read, NULL);
> +
> +/* --------------------------------------------------------------------------
> + * V4L2 subdev core operations
> + */
> +
> +static int
> +et8ek8_registered(struct v4l2_subdev *subdev)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> + struct i2c_client *client = v4l2_get_subdevdata(subdev);
> + struct v4l2_mbus_framefmt *format;
> + int rval;
> +
> + dev_dbg(&client->dev, "registered!");
> +
> + rval = device_create_file(&client->dev, &dev_attr_priv_mem);
> + if (rval) {
> + dev_err(&client->dev, "could not register sysfs entry\n");
> + return rval;
> + }
> +
> + rval = et8ek8_dev_init(subdev);
> + if (rval)
> + goto err_file;
> +
> + rval = et8ek8_init_controls(sensor);
> + if (rval) {
> + dev_err(&client->dev, "controls initialization failed\n");
> + goto err_file;
> + }
> +
> + format = __et8ek8_get_pad_format(sensor, NULL, 0,
> + V4L2_SUBDEV_FORMAT_ACTIVE);
> + return 0;
> +
> +err_file:
> + device_remove_file(&client->dev, &dev_attr_priv_mem);
> +
> + return rval;
> +}
> +
> +static int __et8ek8_set_power(struct et8ek8_sensor *sensor, bool on)
> +{
> + return on ? et8ek8_power_on(sensor) : et8ek8_power_off(sensor);
> +}
> +
> +static int et8ek8_set_power(struct v4l2_subdev *subdev, int on)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> + int ret = 0;
> +
> + mutex_lock(&sensor->power_lock);
> +
> + /* If the power count is modified from 0 to != 0 or from != 0 to 0,
> + * update the power state.
> + */
> + if (sensor->power_count == !on) {
> + ret = __et8ek8_set_power(sensor, !!on);
> + if (ret < 0)
> + goto done;
> + }
> +
> + /* Update the power count. */
> + sensor->power_count += on ? 1 : -1;
> + WARN_ON(sensor->power_count < 0);
Rather some dev_warn()? Do we need stack trace here?
> +
> +done:
> + mutex_unlock(&sensor->power_lock);
> +
> + return ret;
> +}
> +
> +static int et8ek8_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(sd);
> + struct v4l2_mbus_framefmt *format;
> + struct et8ek8_reglist *reglist;
> +
> + reglist = et8ek8_reglist_find_type(&meta_reglist, ET8EK8_REGLIST_MODE);
> + format = __et8ek8_get_pad_format(sensor, fh->pad, 0,
> + V4L2_SUBDEV_FORMAT_TRY);
> + et8ek8_reglist_to_mbus(reglist, format);
> +
> + return et8ek8_set_power(sd, true);
> +}
> +
> +static int et8ek8_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> + return et8ek8_set_power(sd, false);
> +}
> +
> +static const struct v4l2_subdev_video_ops et8ek8_video_ops = {
> + .s_stream = et8ek8_s_stream,
> + .g_frame_interval = et8ek8_get_frame_interval,
> + .s_frame_interval = et8ek8_set_frame_interval,
> +};
> +
> +static const struct v4l2_subdev_core_ops et8ek8_core_ops = {
> + .s_power = et8ek8_set_power,
> +};
> +
> +static const struct v4l2_subdev_pad_ops et8ek8_pad_ops = {
> + .enum_mbus_code = et8ek8_enum_mbus_code,
> + .enum_frame_size = et8ek8_enum_frame_size,
> + .enum_frame_interval = et8ek8_enum_frame_ival,
> + .get_fmt = et8ek8_get_pad_format,
> + .set_fmt = et8ek8_set_pad_format,
> +};
> +
> +static const struct v4l2_subdev_ops et8ek8_ops = {
> + .core = &et8ek8_core_ops,
> + .video = &et8ek8_video_ops,
> + .pad = &et8ek8_pad_ops,
> +};
> +
> +static const struct v4l2_subdev_internal_ops et8ek8_internal_ops = {
> + .registered = et8ek8_registered,
> + .open = et8ek8_open,
> + .close = et8ek8_close,
> +};
> +
> +/* --------------------------------------------------------------------------
> + * I2C driver
> + */
> +static int __maybe_unused et8ek8_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> +
> + if (!sensor->power_count)
> + return 0;
> +
> + return __et8ek8_set_power(sensor, false);
> +}
> +
> +static int __maybe_unused et8ek8_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> +
> + if (!sensor->power_count)
> + return 0;
> +
> + return __et8ek8_set_power(sensor, true);
> +}
> +
> +static int et8ek8_probe(struct i2c_client *client,
> + const struct i2c_device_id *devid)
> +{
> + struct et8ek8_sensor *sensor;
> + struct device *dev = &client->dev;
> + int ret;
> +
> + sensor = devm_kzalloc(&client->dev, sizeof(*sensor), GFP_KERNEL);
> + if (!sensor)
> + return -ENOMEM;
> +
> + sensor->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(sensor->reset)) {
> + dev_dbg(&client->dev, "could not request reset gpio\n");
> + return PTR_ERR(sensor->reset);
> + }
> +
> + sensor->vana = devm_regulator_get(dev, "vana");
> + if (IS_ERR(sensor->vana)) {
> + dev_err(&client->dev, "could not get regulator for vana\n");
> + return PTR_ERR(sensor->vana);
> + }
> +
> + sensor->ext_clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(sensor->ext_clk)) {
> + dev_err(&client->dev, "could not get clock\n");
> + return PTR_ERR(sensor->ext_clk);
> + }
> +
> + ret = of_property_read_u32(dev->of_node, "clock-frequency",
> + &sensor->xclk_freq);
> + if (ret) {
> + dev_warn(dev, "can't get clock-frequency\n");
> + return ret;
> + }
> +
> + mutex_init(&sensor->power_lock);
> +
> + v4l2_i2c_subdev_init(&sensor->subdev, client, &et8ek8_ops);
> + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + sensor->subdev.internal_ops = &et8ek8_internal_ops;
> +
> + sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
> + ret = media_entity_pads_init(&sensor->subdev.entity, 1, &sensor->pad);
> + if (ret < 0) {
> + dev_err(&client->dev, "media entity init failed!\n");
> + goto err_mutex;
> + }
> +
> + ret = v4l2_async_register_subdev(&sensor->subdev);
> + if (ret < 0)
> + goto err_entity;
> +
> + dev_dbg(dev, "initialized!\n");
> +
> + return 0;
> +
> +err_entity:
> + media_entity_cleanup(&sensor->subdev.entity);
> +err_mutex:
> + mutex_destroy(&sensor->power_lock);
> + return ret;
> +}
> +
> +static int __exit et8ek8_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *subdev = i2c_get_clientdata(client);
> + struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
> +
> + if (sensor->power_count) {
> + WARN_ON(1);
Such warning is probably not useful...
> + et8ek8_power_off(sensor);
> + sensor->power_count = 0;
> + }
> +
> + v4l2_device_unregister_subdev(&sensor->subdev);
> + device_remove_file(&client->dev, &dev_attr_priv_mem);
> + v4l2_ctrl_handler_free(&sensor->ctrl_handler);
> + v4l2_async_unregister_subdev(&sensor->subdev);
> + media_entity_cleanup(&sensor->subdev.entity);
> + mutex_destroy(&sensor->power_lock);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id et8ek8_of_table[] = {
> + { .compatible = "toshiba,et8ek8" },
> + { },
> +};
> +
> +static const struct i2c_device_id et8ek8_id_table[] = {
> + { ET8EK8_NAME, 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, et8ek8_id_table);
> +
> +static const struct dev_pm_ops et8ek8_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(et8ek8_suspend, et8ek8_resume)
> +};
> +
> +static struct i2c_driver et8ek8_i2c_driver = {
> + .driver = {
> + .name = ET8EK8_NAME,
> + .pm = &et8ek8_pm_ops,
> + .of_match_table = et8ek8_of_table,
> + },
> + .probe = et8ek8_probe,
> + .remove = __exit_p(et8ek8_remove),
> + .id_table = et8ek8_id_table,
> +};
> +
> +module_i2c_driver(et8ek8_i2c_driver);
> +
> +MODULE_AUTHOR("Sakari Ailus <sakari.ai...@iki.fi>, Pavel Machek
> <pa...@ucw.cz");
> +MODULE_DESCRIPTION("Toshiba ET8EK8 camera sensor driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/i2c/et8ek8/et8ek8_mode.c
> b/drivers/media/i2c/et8ek8/et8ek8_mode.c
> new file mode 100644
> index 0000000..a79882a
> --- /dev/null
> +++ b/drivers/media/i2c/et8ek8/et8ek8_mode.c
> @@ -0,0 +1,587 @@
> +/*
> + * et8ek8_mode.c
> + *
> + * Copyright (C) 2008 Nokia Corporation
> + *
> + * Contact: Sakari Ailus <sakari.ai...@iki.fi>
> + * Tuukka Toivonen <tuukka...@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + */
> +
> +#include "et8ek8_reg.h"
> +
> +/*
> + * Stingray sensor mode settings for Scooby
> + */
Are settings for this sensor Stingray enough?
It was me who copied these sensors settings to kernel driver. And I
chose only Stingray as this is what was needed for my N900 for
testing... Btw, you could add somewhere my and Ivo's Signed-off and
copyright state as we both modified et8ek8.c code...
Other files are (or at least were) in camera-firmware repository on
gitorious.
> +/* Mode1_poweron_Mode2_16VGA_2592x1968_12.07fps */
> +static struct et8ek8_reglist mode1_poweron_mode2_16vga_2592x1968_12_07fps = {
> +/* (without the +1)
> + * SPCK = 80 MHz
> + * CCP2 = 640 MHz
> + * VCO = 640 MHz
> + * VCOUNT = 84 (2016)
> + * HCOUNT = 137 (3288)
> + * CKREF_DIV = 2
> + * CKVAR_DIV = 200
> + * VCO_DIV = 0
> + * SPCK_DIV = 7
> + * MRCK_DIV = 7
> + * LVDSCK_DIV = 0
> + */
> + .type = ET8EK8_REGLIST_POWERON,
> + .mode = {
> + .sensor_width = 2592,
> + .sensor_height = 1968,
> + .sensor_window_origin_x = 0,
> + .sensor_window_origin_y = 0,
> + .sensor_window_width = 2592,
> + .sensor_window_height = 1968,
> + .width = 3288,
> + .height = 2016,
> + .window_origin_x = 0,
> + .window_origin_y = 0,
> + .window_width = 2592,
> + .window_height = 1968,
> + .pixel_clock = 80000000,
> + .ext_clock = 9600000,
> + .timeperframe = {
> + .numerator = 100,
> + .denominator = 1207
> + },
> + .max_exp = 2012,
> + /* .max_gain = 0, */
> + .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .sensitivity = 65536
> + },
> + .regs = {
> + /* Need to set firstly */
> + { ET8EK8_REG_8BIT, 0x126C, 0xCC },
> + /* Strobe and Data of CCP2 delay are minimized. */
> + { ET8EK8_REG_8BIT, 0x1269, 0x00 },
> + /* Refined value of Min H_COUNT */
> + { ET8EK8_REG_8BIT, 0x1220, 0x89 },
> + /* Frequency of SPCK setting (SPCK=MRCK) */
> + { ET8EK8_REG_8BIT, 0x123A, 0x07 },
> + { ET8EK8_REG_8BIT, 0x1241, 0x94 },
> + { ET8EK8_REG_8BIT, 0x1242, 0x02 },
> + { ET8EK8_REG_8BIT, 0x124B, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1255, 0xFF },
> + { ET8EK8_REG_8BIT, 0x1256, 0x9F },
> + { ET8EK8_REG_8BIT, 0x1258, 0x00 },
> + /* From parallel out to serial out */
> + { ET8EK8_REG_8BIT, 0x125D, 0x88 },
> + /* From w/ embeded data to w/o embeded data */
> + { ET8EK8_REG_8BIT, 0x125E, 0xC0 },
> + /* CCP2 out is from STOP to ACTIVE */
> + { ET8EK8_REG_8BIT, 0x1263, 0x98 },
> + { ET8EK8_REG_8BIT, 0x1268, 0xC6 },
> + { ET8EK8_REG_8BIT, 0x1434, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1163, 0x44 },
> + { ET8EK8_REG_8BIT, 0x1166, 0x29 },
> + { ET8EK8_REG_8BIT, 0x1140, 0x02 },
> + { ET8EK8_REG_8BIT, 0x1011, 0x24 },
> + { ET8EK8_REG_8BIT, 0x1151, 0x80 },
> + { ET8EK8_REG_8BIT, 0x1152, 0x23 },
> + /* Initial setting for improvement2 of lower frequency noise */
> + { ET8EK8_REG_8BIT, 0x1014, 0x05 },
> + { ET8EK8_REG_8BIT, 0x1033, 0x06 },
> + { ET8EK8_REG_8BIT, 0x1034, 0x79 },
> + { ET8EK8_REG_8BIT, 0x1423, 0x3F },
> + { ET8EK8_REG_8BIT, 0x1424, 0x3F },
> + { ET8EK8_REG_8BIT, 0x1426, 0x00 },
> + /* Switch of Preset-White-balance (0d:disable / 1d:enable) */
> + { ET8EK8_REG_8BIT, 0x1439, 0x00 },
> + /* Switch of blemish correction (0d:disable / 1d:enable) */
> + { ET8EK8_REG_8BIT, 0x161F, 0x60 },
> + /* Switch of auto noise correction (0d:disable / 1d:enable) */
> + { ET8EK8_REG_8BIT, 0x1634, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1646, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1648, 0x00 },
> + { ET8EK8_REG_8BIT, 0x113E, 0x01 },
> + { ET8EK8_REG_8BIT, 0x113F, 0x22 },
> + { ET8EK8_REG_8BIT, 0x1239, 0x64 },
> + { ET8EK8_REG_8BIT, 0x1238, 0x02 },
> + { ET8EK8_REG_8BIT, 0x123B, 0x70 },
> + { ET8EK8_REG_8BIT, 0x123A, 0x07 },
> + { ET8EK8_REG_8BIT, 0x121B, 0x64 },
> + { ET8EK8_REG_8BIT, 0x121D, 0x64 },
> + { ET8EK8_REG_8BIT, 0x1221, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1220, 0x89 },
> + { ET8EK8_REG_8BIT, 0x1223, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1222, 0x54 },
> + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
> + { ET8EK8_REG_TERM, 0, 0}
> + }
> +};
> +
> +/* Mode1_16VGA_2592x1968_13.12fps_DPCM10-8 */
> +static struct et8ek8_reglist mode1_16vga_2592x1968_13_12fps_dpcm10_8 = {
> +/* (without the +1)
> + * SPCK = 80 MHz
> + * CCP2 = 560 MHz
> + * VCO = 560 MHz
> + * VCOUNT = 84 (2016)
> + * HCOUNT = 128 (3072)
> + * CKREF_DIV = 2
> + * CKVAR_DIV = 175
> + * VCO_DIV = 0
> + * SPCK_DIV = 6
> + * MRCK_DIV = 7
> + * LVDSCK_DIV = 0
> + */
> + .type = ET8EK8_REGLIST_MODE,
> + .mode = {
> + .sensor_width = 2592,
> + .sensor_height = 1968,
> + .sensor_window_origin_x = 0,
> + .sensor_window_origin_y = 0,
> + .sensor_window_width = 2592,
> + .sensor_window_height = 1968,
> + .width = 3072,
> + .height = 2016,
> + .window_origin_x = 0,
> + .window_origin_y = 0,
> + .window_width = 2592,
> + .window_height = 1968,
> + .pixel_clock = 80000000,
> + .ext_clock = 9600000,
> + .timeperframe = {
> + .numerator = 100,
> + .denominator = 1292
> + },
> + .max_exp = 2012,
> + /* .max_gain = 0, */
> + .bus_format = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
> + .sensitivity = 65536
> + },
> + .regs = {
> + { ET8EK8_REG_8BIT, 0x1239, 0x57 },
> + { ET8EK8_REG_8BIT, 0x1238, 0x82 },
> + { ET8EK8_REG_8BIT, 0x123B, 0x70 },
> + { ET8EK8_REG_8BIT, 0x123A, 0x06 },
> + { ET8EK8_REG_8BIT, 0x121B, 0x64 },
> + { ET8EK8_REG_8BIT, 0x121D, 0x64 },
> + { ET8EK8_REG_8BIT, 0x1221, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1220, 0x80 }, /* <-changed to v14 7E->80 */
> + { ET8EK8_REG_8BIT, 0x1223, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1222, 0x54 },
> + { ET8EK8_REG_8BIT, 0x125D, 0x83 }, /* CCP_LVDS_MODE/ */
> + { ET8EK8_REG_TERM, 0, 0}
> + }
> +};
> +
> +/* Mode3_4VGA_1296x984_29.99fps_DPCM10-8 */
> +static struct et8ek8_reglist mode3_4vga_1296x984_29_99fps_dpcm10_8 = {
> +/* (without the +1)
> + * SPCK = 96.5333333333333 MHz
> + * CCP2 = 579.2 MHz
> + * VCO = 579.2 MHz
> + * VCOUNT = 84 (2016)
> + * HCOUNT = 133 (3192)
> + * CKREF_DIV = 2
> + * CKVAR_DIV = 181
> + * VCO_DIV = 0
> + * SPCK_DIV = 5
> + * MRCK_DIV = 7
> + * LVDSCK_DIV = 0
> + */
> + .type = ET8EK8_REGLIST_MODE,
> + .mode = {
> + .sensor_width = 2592,
> + .sensor_height = 1968,
> + .sensor_window_origin_x = 0,
> + .sensor_window_origin_y = 0,
> + .sensor_window_width = 2592,
> + .sensor_window_height = 1968,
> + .width = 3192,
> + .height = 1008,
> + .window_origin_x = 0,
> + .window_origin_y = 0,
> + .window_width = 1296,
> + .window_height = 984,
> + .pixel_clock = 96533333,
> + .ext_clock = 9600000,
> + .timeperframe = {
> + .numerator = 100,
> + .denominator = 3000
> + },
> + .max_exp = 1004,
> + /* .max_gain = 0, */
> + .bus_format = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
> + .sensitivity = 65536
> + },
> + .regs = {
> + { ET8EK8_REG_8BIT, 0x1239, 0x5A },
> + { ET8EK8_REG_8BIT, 0x1238, 0x82 },
> + { ET8EK8_REG_8BIT, 0x123B, 0x70 },
> + { ET8EK8_REG_8BIT, 0x123A, 0x05 },
> + { ET8EK8_REG_8BIT, 0x121B, 0x63 },
> + { ET8EK8_REG_8BIT, 0x1220, 0x85 },
> + { ET8EK8_REG_8BIT, 0x1221, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1222, 0x54 },
> + { ET8EK8_REG_8BIT, 0x1223, 0x00 },
> + { ET8EK8_REG_8BIT, 0x121D, 0x63 },
> + { ET8EK8_REG_8BIT, 0x125D, 0x83 }, /* CCP_LVDS_MODE/ */
> + { ET8EK8_REG_TERM, 0, 0}
> + }
> +};
> +
> +/* Mode4_SVGA_864x656_29.88fps */
> +static struct et8ek8_reglist mode4_svga_864x656_29_88fps = {
> +/* (without the +1)
> + * SPCK = 80 MHz
> + * CCP2 = 320 MHz
> + * VCO = 640 MHz
> + * VCOUNT = 84 (2016)
> + * HCOUNT = 166 (3984)
> + * CKREF_DIV = 2
> + * CKVAR_DIV = 200
> + * VCO_DIV = 0
> + * SPCK_DIV = 7
> + * MRCK_DIV = 7
> + * LVDSCK_DIV = 1
> + */
> + .type = ET8EK8_REGLIST_MODE,
> + .mode = {
> + .sensor_width = 2592,
> + .sensor_height = 1968,
> + .sensor_window_origin_x = 0,
> + .sensor_window_origin_y = 0,
> + .sensor_window_width = 2592,
> + .sensor_window_height = 1968,
> + .width = 3984,
> + .height = 672,
> + .window_origin_x = 0,
> + .window_origin_y = 0,
> + .window_width = 864,
> + .window_height = 656,
> + .pixel_clock = 80000000,
> + .ext_clock = 9600000,
> + .timeperframe = {
> + .numerator = 100,
> + .denominator = 2988
> + },
> + .max_exp = 668,
> + /* .max_gain = 0, */
> + .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .sensitivity = 65536
> + },
> + .regs = {
> + { ET8EK8_REG_8BIT, 0x1239, 0x64 },
> + { ET8EK8_REG_8BIT, 0x1238, 0x02 },
> + { ET8EK8_REG_8BIT, 0x123B, 0x71 },
> + { ET8EK8_REG_8BIT, 0x123A, 0x07 },
> + { ET8EK8_REG_8BIT, 0x121B, 0x62 },
> + { ET8EK8_REG_8BIT, 0x121D, 0x62 },
> + { ET8EK8_REG_8BIT, 0x1221, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1220, 0xA6 },
> + { ET8EK8_REG_8BIT, 0x1223, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1222, 0x54 },
> + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
> + { ET8EK8_REG_TERM, 0, 0}
> + }
> +};
> +
> +/* Mode5_VGA_648x492_29.93fps */
> +static struct et8ek8_reglist mode5_vga_648x492_29_93fps = {
> +/* (without the +1)
> + * SPCK = 80 MHz
> + * CCP2 = 320 MHz
> + * VCO = 640 MHz
> + * VCOUNT = 84 (2016)
> + * HCOUNT = 221 (5304)
> + * CKREF_DIV = 2
> + * CKVAR_DIV = 200
> + * VCO_DIV = 0
> + * SPCK_DIV = 7
> + * MRCK_DIV = 7
> + * LVDSCK_DIV = 1
> + */
> + .type = ET8EK8_REGLIST_MODE,
> + .mode = {
> + .sensor_width = 2592,
> + .sensor_height = 1968,
> + .sensor_window_origin_x = 0,
> + .sensor_window_origin_y = 0,
> + .sensor_window_width = 2592,
> + .sensor_window_height = 1968,
> + .width = 5304,
> + .height = 504,
> + .window_origin_x = 0,
> + .window_origin_y = 0,
> + .window_width = 648,
> + .window_height = 492,
> + .pixel_clock = 80000000,
> + .ext_clock = 9600000,
> + .timeperframe = {
> + .numerator = 100,
> + .denominator = 2993
> + },
> + .max_exp = 500,
> + /* .max_gain = 0, */
> + .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .sensitivity = 65536
> + },
> + .regs = {
> + { ET8EK8_REG_8BIT, 0x1239, 0x64 },
> + { ET8EK8_REG_8BIT, 0x1238, 0x02 },
> + { ET8EK8_REG_8BIT, 0x123B, 0x71 },
> + { ET8EK8_REG_8BIT, 0x123A, 0x07 },
> + { ET8EK8_REG_8BIT, 0x121B, 0x61 },
> + { ET8EK8_REG_8BIT, 0x121D, 0x61 },
> + { ET8EK8_REG_8BIT, 0x1221, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1220, 0xDD },
> + { ET8EK8_REG_8BIT, 0x1223, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1222, 0x54 },
> + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
> + { ET8EK8_REG_TERM, 0, 0}
> + }
> +};
> +
> +/* Mode2_16VGA_2592x1968_3.99fps */
> +static struct et8ek8_reglist mode2_16vga_2592x1968_3_99fps = {
> +/* (without the +1)
> + * SPCK = 80 MHz
> + * CCP2 = 640 MHz
> + * VCO = 640 MHz
> + * VCOUNT = 254 (6096)
> + * HCOUNT = 137 (3288)
> + * CKREF_DIV = 2
> + * CKVAR_DIV = 200
> + * VCO_DIV = 0
> + * SPCK_DIV = 7
> + * MRCK_DIV = 7
> + * LVDSCK_DIV = 0
> + */
> + .type = ET8EK8_REGLIST_MODE,
> + .mode = {
> + .sensor_width = 2592,
> + .sensor_height = 1968,
> + .sensor_window_origin_x = 0,
> + .sensor_window_origin_y = 0,
> + .sensor_window_width = 2592,
> + .sensor_window_height = 1968,
> + .width = 3288,
> + .height = 6096,
> + .window_origin_x = 0,
> + .window_origin_y = 0,
> + .window_width = 2592,
> + .window_height = 1968,
> + .pixel_clock = 80000000,
> + .ext_clock = 9600000,
> + .timeperframe = {
> + .numerator = 100,
> + .denominator = 399
> + },
> + .max_exp = 6092,
> + /* .max_gain = 0, */
> + .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .sensitivity = 65536
> + },
> + .regs = {
> + { ET8EK8_REG_8BIT, 0x1239, 0x64 },
> + { ET8EK8_REG_8BIT, 0x1238, 0x02 },
> + { ET8EK8_REG_8BIT, 0x123B, 0x70 },
> + { ET8EK8_REG_8BIT, 0x123A, 0x07 },
> + { ET8EK8_REG_8BIT, 0x121B, 0x64 },
> + { ET8EK8_REG_8BIT, 0x121D, 0x64 },
> + { ET8EK8_REG_8BIT, 0x1221, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1220, 0x89 },
> + { ET8EK8_REG_8BIT, 0x1223, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1222, 0xFE },
> + { ET8EK8_REG_TERM, 0, 0}
> + }
> +};
> +
> +/* Mode_648x492_5fps */
> +static struct et8ek8_reglist mode_648x492_5fps = {
> +/* (without the +1)
> + * SPCK = 13.3333333333333 MHz
> + * CCP2 = 53.3333333333333 MHz
> + * VCO = 640 MHz
> + * VCOUNT = 84 (2016)
> + * HCOUNT = 221 (5304)
> + * CKREF_DIV = 2
> + * CKVAR_DIV = 200
> + * VCO_DIV = 5
> + * SPCK_DIV = 7
> + * MRCK_DIV = 7
> + * LVDSCK_DIV = 1
> + */
> + .type = ET8EK8_REGLIST_MODE,
> + .mode = {
> + .sensor_width = 2592,
> + .sensor_height = 1968,
> + .sensor_window_origin_x = 0,
> + .sensor_window_origin_y = 0,
> + .sensor_window_width = 2592,
> + .sensor_window_height = 1968,
> + .width = 5304,
> + .height = 504,
> + .window_origin_x = 0,
> + .window_origin_y = 0,
> + .window_width = 648,
> + .window_height = 492,
> + .pixel_clock = 13333333,
> + .ext_clock = 9600000,
> + .timeperframe = {
> + .numerator = 100,
> + .denominator = 499
> + },
> + .max_exp = 500,
> + /* .max_gain = 0, */
> + .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .sensitivity = 65536
> + },
> + .regs = {
> + { ET8EK8_REG_8BIT, 0x1239, 0x64 },
> + { ET8EK8_REG_8BIT, 0x1238, 0x02 },
> + { ET8EK8_REG_8BIT, 0x123B, 0x71 },
> + { ET8EK8_REG_8BIT, 0x123A, 0x57 },
> + { ET8EK8_REG_8BIT, 0x121B, 0x61 },
> + { ET8EK8_REG_8BIT, 0x121D, 0x61 },
> + { ET8EK8_REG_8BIT, 0x1221, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1220, 0xDD },
> + { ET8EK8_REG_8BIT, 0x1223, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1222, 0x54 },
> + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
> + { ET8EK8_REG_TERM, 0, 0}
> + }
> +};
> +
> +/* Mode3_4VGA_1296x984_5fps */
> +static struct et8ek8_reglist mode3_4vga_1296x984_5fps = {
> +/* (without the +1)
> + * SPCK = 49.4 MHz
> + * CCP2 = 395.2 MHz
> + * VCO = 790.4 MHz
> + * VCOUNT = 250 (6000)
> + * HCOUNT = 137 (3288)
> + * CKREF_DIV = 2
> + * CKVAR_DIV = 247
> + * VCO_DIV = 1
> + * SPCK_DIV = 7
> + * MRCK_DIV = 7
> + * LVDSCK_DIV = 0
> + */
> + .type = ET8EK8_REGLIST_MODE,
> + .mode = {
> + .sensor_width = 2592,
> + .sensor_height = 1968,
> + .sensor_window_origin_x = 0,
> + .sensor_window_origin_y = 0,
> + .sensor_window_width = 2592,
> + .sensor_window_height = 1968,
> + .width = 3288,
> + .height = 3000,
> + .window_origin_x = 0,
> + .window_origin_y = 0,
> + .window_width = 1296,
> + .window_height = 984,
> + .pixel_clock = 49400000,
> + .ext_clock = 9600000,
> + .timeperframe = {
> + .numerator = 100,
> + .denominator = 501
> + },
> + .max_exp = 2996,
> + /* .max_gain = 0, */
> + .bus_format = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .sensitivity = 65536
> + },
> + .regs = {
> + { ET8EK8_REG_8BIT, 0x1239, 0x7B },
> + { ET8EK8_REG_8BIT, 0x1238, 0x82 },
> + { ET8EK8_REG_8BIT, 0x123B, 0x70 },
> + { ET8EK8_REG_8BIT, 0x123A, 0x17 },
> + { ET8EK8_REG_8BIT, 0x121B, 0x63 },
> + { ET8EK8_REG_8BIT, 0x121D, 0x63 },
> + { ET8EK8_REG_8BIT, 0x1221, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1220, 0x89 },
> + { ET8EK8_REG_8BIT, 0x1223, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1222, 0xFA },
> + { ET8EK8_REG_8BIT, 0x125D, 0x88 }, /* CCP_LVDS_MODE/ */
> + { ET8EK8_REG_TERM, 0, 0}
> + }
> +};
> +
> +/* Mode_4VGA_1296x984_25fps_DPCM10-8 */
> +static struct et8ek8_reglist mode_4vga_1296x984_25fps_dpcm10_8 = {
> +/* (without the +1)
> + * SPCK = 84.2666666666667 MHz
> + * CCP2 = 505.6 MHz
> + * VCO = 505.6 MHz
> + * VCOUNT = 88 (2112)
> + * HCOUNT = 133 (3192)
> + * CKREF_DIV = 2
> + * CKVAR_DIV = 158
> + * VCO_DIV = 0
> + * SPCK_DIV = 5
> + * MRCK_DIV = 7
> + * LVDSCK_DIV = 0
> + */
> + .type = ET8EK8_REGLIST_MODE,
> + .mode = {
> + .sensor_width = 2592,
> + .sensor_height = 1968,
> + .sensor_window_origin_x = 0,
> + .sensor_window_origin_y = 0,
> + .sensor_window_width = 2592,
> + .sensor_window_height = 1968,
> + .width = 3192,
> + .height = 1056,
> + .window_origin_x = 0,
> + .window_origin_y = 0,
> + .window_width = 1296,
> + .window_height = 984,
> + .pixel_clock = 84266667,
> + .ext_clock = 9600000,
> + .timeperframe = {
> + .numerator = 100,
> + .denominator = 2500
> + },
> + .max_exp = 1052,
> + /* .max_gain = 0, */
> + .bus_format = MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
> + .sensitivity = 65536
> + },
> + .regs = {
> + { ET8EK8_REG_8BIT, 0x1239, 0x4F },
> + { ET8EK8_REG_8BIT, 0x1238, 0x02 },
> + { ET8EK8_REG_8BIT, 0x123B, 0x70 },
> + { ET8EK8_REG_8BIT, 0x123A, 0x05 },
> + { ET8EK8_REG_8BIT, 0x121B, 0x63 },
> + { ET8EK8_REG_8BIT, 0x1220, 0x85 },
> + { ET8EK8_REG_8BIT, 0x1221, 0x00 },
> + { ET8EK8_REG_8BIT, 0x1222, 0x58 },
> + { ET8EK8_REG_8BIT, 0x1223, 0x00 },
> + { ET8EK8_REG_8BIT, 0x121D, 0x63 },
> + { ET8EK8_REG_8BIT, 0x125D, 0x83 },
> + { ET8EK8_REG_TERM, 0, 0}
> + }
> +};
> +
> +struct et8ek8_meta_reglist meta_reglist = {
> + .version = "V14 03-June-2008",
> + .reglist = {
> + { .ptr = &mode1_poweron_mode2_16vga_2592x1968_12_07fps },
> + { .ptr = &mode1_16vga_2592x1968_13_12fps_dpcm10_8 },
> + { .ptr = &mode3_4vga_1296x984_29_99fps_dpcm10_8 },
> + { .ptr = &mode4_svga_864x656_29_88fps },
> + { .ptr = &mode5_vga_648x492_29_93fps },
> + { .ptr = &mode2_16vga_2592x1968_3_99fps },
> + { .ptr = &mode_648x492_5fps },
> + { .ptr = &mode3_4vga_1296x984_5fps },
> + { .ptr = &mode_4vga_1296x984_25fps_dpcm10_8 },
> + { .ptr = NULL }
> + }
> +};
> diff --git a/drivers/media/i2c/et8ek8/et8ek8_reg.h
> b/drivers/media/i2c/et8ek8/et8ek8_reg.h
> new file mode 100644
> index 0000000..07f1873
> --- /dev/null
> +++ b/drivers/media/i2c/et8ek8/et8ek8_reg.h
> @@ -0,0 +1,96 @@
> +/*
> + * et8ek8_reg.h
> + *
> + * Copyright (C) 2008 Nokia Corporation
> + *
> + * Contact: Sakari Ailus <sakari.ai...@iki.fi>
> + * Tuukka Toivonen <tuukka...@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + */
> +
> +#ifndef ET8EK8REGS_H
> +#define ET8EK8REGS_H
> +
> +#include <linux/i2c.h>
> +#include <linux/types.h>
> +#include <linux/videodev2.h>
> +#include <linux/v4l2-subdev.h>
> +
> +struct v4l2_mbus_framefmt;
> +struct v4l2_subdev_pad_mbus_code_enum;
> +
> +struct et8ek8_mode {
> + /* Physical sensor resolution and current image window */
> + u16 sensor_width;
> + u16 sensor_height;
> + u16 sensor_window_origin_x;
> + u16 sensor_window_origin_y;
> + u16 sensor_window_width;
> + u16 sensor_window_height;
> +
> + /* Image data coming from sensor (after scaling) */
> + u16 width;
> + u16 height;
> + u16 window_origin_x;
> + u16 window_origin_y;
> + u16 window_width;
> + u16 window_height;
> +
> + u32 pixel_clock; /* in Hz */
> + u32 ext_clock; /* in Hz */
> + struct v4l2_fract timeperframe;
> + u32 max_exp; /* Maximum exposure value */
> + u32 bus_format; /* MEDIA_BUS_FMT_ */
> + u32 sensitivity; /* 16.16 fixed point */
> +};
> +
> +#define ET8EK8_REG_8BIT 1
> +#define ET8EK8_REG_16BIT 2
> +#define ET8EK8_REG_DELAY 100
> +#define ET8EK8_REG_TERM 0xff
> +struct et8ek8_reg {
> + u16 type;
> + u16 reg; /* 16-bit offset */
> + u32 val; /* 8/16/32-bit value */
> +};
> +
> +/* Possible struct smia_reglist types. */
> +#define ET8EK8_REGLIST_STANDBY 0
> +#define ET8EK8_REGLIST_POWERON 1
> +#define ET8EK8_REGLIST_RESUME 2
> +#define ET8EK8_REGLIST_STREAMON 3
> +#define ET8EK8_REGLIST_STREAMOFF 4
> +#define ET8EK8_REGLIST_DISABLED 5
> +
> +#define ET8EK8_REGLIST_MODE 10
> +
> +#define ET8EK8_REGLIST_LSC_ENABLE 100
> +#define ET8EK8_REGLIST_LSC_DISABLE 101
> +#define ET8EK8_REGLIST_ANR_ENABLE 102
> +#define ET8EK8_REGLIST_ANR_DISABLE 103
> +
> +struct et8ek8_reglist {
> + u32 type;
> + struct et8ek8_mode mode;
> + struct et8ek8_reg regs[];
> +};
> +
> +#define ET8EK8_MAX_LEN 32
> +struct et8ek8_meta_reglist {
> + char version[ET8EK8_MAX_LEN];
> + union {
> + struct et8ek8_reglist *ptr;
> + } reglist[];
> +};
> +
> +extern struct et8ek8_meta_reglist meta_reglist;
> +
> +#endif /* ET8EK8REGS */
>
>
--
Pali Rohár
pali.ro...@gmail.com
