When using RS485 in half duplex, RX should be enabled when TX is
finished, and stopped when TX starts.
Before commit 0058f0871efe7b01c6 ("tty/serial: atmel: fix RS485 half
duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
was used. So, collisions could happened.
But disabling RX in atmel_start_tx() uncovered another bug:
RX was enabled again in the wrong place (in atmel_tx_dma) instead of
being enabled when TX is finished (in atmel_complete_tx_dma), so the
transmission simply stopped.
This bug was not triggered before commit 0058f0871efe7b01c6
("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
never disabled before.
Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.
Cc: sta...@vger.kernel.org
Reported-by: Gil Weber <weber...@gmail.com>
Tested-by: Gil Weber <weber...@gmail.com>
Signed-off-by: Richard Genoud <richard.gen...@gmail.com>
---
drivers/tty/serial/atmel_serial.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/tty/serial/atmel_serial.c
b/drivers/tty/serial/atmel_serial.c
index 168b10cad47b..11c0117af80b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -798,6 +798,11 @@ static void atmel_complete_tx_dma(void *arg)
*/
if (!uart_circ_empty(xmit))
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
+ else if ((port->rs485.flags & SER_RS485_ENABLED) &&
+ !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+ /* DMA done, stop TX, start RX for RS485 */
+ atmel_start_rx(port);
+ }
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -900,12 +905,6 @@ static void atmel_tx_dma(struct uart_port *port)
desc->callback = atmel_complete_tx_dma;
desc->callback_param = atmel_port;
atmel_port->cookie_tx = dmaengine_submit(desc);
-
- } else {
- if (port->rs485.flags & SER_RS485_ENABLED) {
- /* DMA done, stop TX, start RX for RS485 */
- atmel_start_rx(port);
- }
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
