> > ---
> > drivers/char/tpm/tpm_crb.c | 96
> > ++++++++++++++++++++++++++++++----------------
> > 1 file changed, 64 insertions(+), 32 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> > index 717b6b4..8d81b66 100644
> > --- a/drivers/char/tpm/tpm_crb.c
> > +++ b/drivers/char/tpm/tpm_crb.c
> > @@ -52,18 +52,28 @@ enum crb_cancel {
> > CRB_CANCEL_INVOKE = BIT(0),
> > };
> >
> > -struct crb_control_area {
> > - u32 req;
> > - u32 sts;
> > - u32 cancel;
> > - u32 start;
> > - u32 int_enable;
> > - u32 int_sts;
> > - u32 cmd_size;
> > - u32 cmd_pa_low;
> > - u32 cmd_pa_high;
> > - u32 rsp_size;
> > - u64 rsp_pa;
> > +struct crb_regs_head {
> > + u32 loc_state;
> > + u32 reserved1;
> > + u32 loc_ctrl;
> > + u32 loc_sts;
> > + u8 reserved2[32];
> > + u64 intf_id;
> > + u64 ctrl_ext;
> > +} __packed;
> > +
> > +struct crb_regs_tail {
> > + u32 ctrl_req;
> > + u32 ctrl_sts;
> > + u32 ctrl_cancel;
> > + u32 ctrl_start;
> > + u32 ctrl_int_enable;
> > + u32 ctrl_int_sts;
> > + u32 ctrl_cmd_size;
> > + u32 ctrl_cmd_pa_low;
> > + u32 ctrl_cmd_pa_high;
> > + u32 ctrl_rsp_size;
> > + u64 ctrl_rsp_pa;
> > } __packed;
Now I wonder if using traditional offsets wouldn't be cleaner solution.
> > enum crb_status {
> > @@ -78,7 +88,8 @@ enum crb_flags {
> > struct crb_priv {
> > unsigned int flags;
> > void __iomem *iobase;
> > - struct crb_control_area __iomem *cca;
> > + struct crb_regs_head __iomem *regs_h;
> > + struct crb_regs_tail __iomem *regs_t;
Why just not leaving it cca, it's descriptive enough.
> > u8 __iomem *cmd;
> > u8 __iomem *rsp;
> > u32 cmd_size;
> > @@ -104,7 +115,7 @@ static int __maybe_unused crb_go_idle(struct device
> *dev, struct crb_priv *priv)
> > if (priv->flags & CRB_FL_ACPI_START)
> > return 0;
> >
> > - iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->cca->req);
> > + iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req);
> > /* we don't really care when this settles */
> >
> > return 0;
> > @@ -128,21 +139,23 @@ static int __maybe_unused crb_cmd_ready(struct
> device *dev,
> > struct crb_priv *priv)
> > {
> > ktime_t stop, start;
> > + u32 req;
> >
> > if (priv->flags & CRB_FL_ACPI_START)
> > return 0;
> >
> > - iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->cca->req);
> > + iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
> >
> > start = ktime_get();
> > stop = ktime_add(start, ms_to_ktime(TPM2_TIMEOUT_C));
> > do {
> > - if (!(ioread32(&priv->cca->req) &
> CRB_CTRL_REQ_CMD_READY))
> > + req = ioread32(&priv->regs_t->ctrl_req);
> > + if (!(req & CRB_CTRL_REQ_CMD_READY))
> > return 0;
> > usleep_range(50, 100);
> > } while (ktime_before(ktime_get(), stop));
> >
> > - if (ioread32(&priv->cca->req) & CRB_CTRL_REQ_CMD_READY) {
> > + if (ioread32(&priv->regs_t->ctrl_req) & CRB_CTRL_REQ_CMD_READY)
> {
> > dev_warn(dev, "cmdReady timed out\n");
> > return -ETIME;
> > }
> > @@ -155,7 +168,7 @@ static u8 crb_status(struct tpm_chip *chip)
> > struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> > u8 sts = 0;
> >
> > - if ((ioread32(&priv->cca->start) & CRB_START_INVOKE) !=
> > + if ((ioread32(&priv->regs_t->ctrl_start) & CRB_START_INVOKE) !=
> > CRB_START_INVOKE)
> > sts |= CRB_DRV_STS_COMPLETE;
> >
> > @@ -171,7 +184,7 @@ static int crb_recv(struct tpm_chip *chip, u8 *buf,
> size_t count)
> > if (count < 6)
> > return -EIO;
> >
> > - if (ioread32(&priv->cca->sts) & CRB_CTRL_STS_ERROR)
> > + if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
> > return -EIO;
> >
> > memcpy_fromio(buf, priv->rsp, 6);
> > @@ -210,7 +223,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf,
> size_t len)
> > /* Zero the cancel register so that the next command will not get
> > * canceled.
> > */
> > - iowrite32(0, &priv->cca->cancel);
> > + iowrite32(0, &priv->regs_t->ctrl_cancel);
> >
> > if (len > priv->cmd_size) {
> > dev_err(&chip->dev, "invalid command count value %zd %d\n",
> @@
> > -224,7 +237,7 @@ static int crb_send(struct tpm_chip *chip, u8 *buf, size_t
> len)
> > wmb();
> >
> > if (priv->flags & CRB_FL_CRB_START)
> > - iowrite32(CRB_START_INVOKE, &priv->cca->start);
> > + iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
> >
> > if (priv->flags & CRB_FL_ACPI_START)
> > rc = crb_do_acpi_start(chip);
> > @@ -236,7 +249,7 @@ static void crb_cancel(struct tpm_chip *chip) {
> > struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> >
> > - iowrite32(CRB_CANCEL_INVOKE, &priv->cca->cancel);
> > + iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel);
> >
> > if ((priv->flags & CRB_FL_ACPI_START) && crb_do_acpi_start(chip))
> > dev_err(&chip->dev, "ACPI Start failed\n"); @@ -245,7 +258,7
> @@
> > static void crb_cancel(struct tpm_chip *chip) static bool
> > crb_req_canceled(struct tpm_chip *chip, u8 status) {
> > struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> > - u32 cancel = ioread32(&priv->cca->cancel);
> > + u32 cancel = ioread32(&priv->regs_t->ctrl_cancel);
> >
> > return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE; }
> @@
> > -287,6 +300,8 @@ static void __iomem *crb_map_res(struct device *dev,
> struct crb_priv *priv,
> > if (start != new_res.start)
> > return (void __iomem *) ERR_PTR(-EINVAL);
> >
> > + dev_dbg(dev, "%pr %pr", io_res, &new_res);
> > +
> > if (!resource_contains(io_res, &new_res))
> > return devm_ioremap_resource(dev, &new_res);
> >
> > @@ -322,10 +337,27 @@ static int crb_map_io(struct acpi_device *device,
> struct crb_priv *priv,
> > if (IS_ERR(priv->iobase))
> > return PTR_ERR(priv->iobase);
> >
> > - priv->cca = crb_map_res(dev, priv, &io_res, buf->control_address,
> > - sizeof(struct crb_control_area));
> > - if (IS_ERR(priv->cca))
> > - return PTR_ERR(priv->cca);
> > + /* The ACPI IO region starts at the head area and continues to include
> > + * the control area, as one nice sane region except for some older
> > + * stuff that puts the control area outside the ACPI IO region.
> > + */
This is not by the spec, can you be more specific, what platforms has that
behavior?
> > + if (!(priv->flags & CRB_FL_ACPI_START)) {
> > + if (buf->control_address == io_res.start +
> > + sizeof(struct crb_regs_head)) {
> > + priv->regs_h = crb_map_res(
Why do you need to map this again it just same as iobase ?
> > + dev, priv, &io_res, io_res.start,
> > + sizeof(struct crb_regs_head));
> > + if (IS_ERR(priv->regs_h))
> > + return PTR_ERR(priv->regs_h);
> > + } else {
> > + dev_warn(dev, FW_BUG "Bad ACPI memory layout");
> > + }
> > + }
> > +
> > + priv->regs_t = crb_map_res(dev, priv, &io_res, buf->control_address,
> > + sizeof(struct crb_regs_tail));
> > + if (IS_ERR(priv->regs_t))
> > + return PTR_ERR(priv->regs_t);
> >
> > /*
> > * PTT HW bug w/a: wake up the device to access @@ -335,10 +367,10
> > @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
> > if (ret)
> > return ret;
> >
> > - pa_high = ioread32(&priv->cca->cmd_pa_high);
> > - pa_low = ioread32(&priv->cca->cmd_pa_low);
> > + pa_high = ioread32(&priv->regs_t->ctrl_cmd_pa_high);
> > + pa_low = ioread32(&priv->regs_t->ctrl_cmd_pa_low);
> > cmd_pa = ((u64)pa_high << 32) | pa_low;
> > - cmd_size = ioread32(&priv->cca->cmd_size);
> > + cmd_size = ioread32(&priv->regs_t->ctrl_cmd_size);
> >
> > dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n",
> > pa_high, pa_low, cmd_size);
> > @@ -349,9 +381,9 @@ static int crb_map_io(struct acpi_device *device,
> struct crb_priv *priv,
> > goto out;
> > }
> >
> > - memcpy_fromio(&rsp_pa, &priv->cca->rsp_pa, 8);
> > + memcpy_fromio(&rsp_pa, &priv->regs_t->ctrl_rsp_pa, 8);
> > rsp_pa = le64_to_cpu(rsp_pa);
> > - rsp_size = ioread32(&priv->cca->rsp_size);
> > + rsp_size = ioread32(&priv->regs_t->ctrl_rsp_size);
> >
> > if (cmd_pa != rsp_pa) {
> > priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size);
> > --
> > 2.9.3
> >
>
