The card detect gpio on the hawk board is gpio4_0 and not gpio3_12
Signed-off-by: Axel Haslam <ahas...@baylibre.com>
---
arch/arm/mach-davinci/board-omapl138-hawk.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c
b/arch/arm/mach-davinci/board-omapl138-hawk.c
index a4e8726..c0c24ba9 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -25,7 +25,7 @@
#include <mach/mux.h>
#define HAWKBOARD_PHY_ID "davinci_mdio-0:07"
-#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
+#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
#define DA850_USB1_VBUS_PIN GPIO_TO_PIN(2, 4)
@@ -119,7 +119,7 @@ static struct edma_rsv_info *da850_edma_rsv[2] = {
static const short hawk_mmcsd0_pins[] = {
DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
- DA850_GPIO3_12, DA850_GPIO3_13,
+ DA850_GPIO4_0, DA850_GPIO3_13,
-1
};
--
2.9.3
