On 10/11/16 09:25, Brian Masney wrote:
> When updating the in_illuminance_calibscale and
> in_illuminance_integration_time sysfs attributes, these values were not
> actually written to the chip. The chip would continue to use the old
> parameters. Extracted out tsl2583_set_als_gain() and
> tsl2583_set_als_time() functions that are now called when these sysfs
> attributes are updated. The chip initialization also calls these these
> new functions.
> 
> Signed-off-by: Brian Masney <masn...@onstation.org>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan
> ---
>  drivers/staging/iio/light/tsl2583.c | 85 
> +++++++++++++++++++++++--------------
>  1 file changed, 52 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/tsl2583.c 
> b/drivers/staging/iio/light/tsl2583.c
> index c196a42..1a7be12 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -352,6 +352,51 @@ static int taos_als_calibrate(struct iio_dev *indio_dev)
>       return (int)gain_trim_val;
>  }
>  
> +static int tsl2583_set_als_time(struct tsl2583_chip *chip)
> +{
> +     int als_count, als_time, ret;
> +     u8 val;
> +
> +     /* determine als integration register */
> +     als_count = (chip->taos_settings.als_time * 100 + 135) / 270;
> +     if (!als_count)
> +             als_count = 1; /* ensure at least one cycle */
> +
> +     /* convert back to time (encompasses overrides) */
> +     als_time = (als_count * 27 + 5) / 10;
> +
> +     val = 256 - als_count;
> +     ret = i2c_smbus_write_byte_data(chip->client,
> +                                     TSL258X_CMD_REG | TSL258X_ALS_TIME,
> +                                     val);
> +     if (ret < 0) {
> +             dev_err(&chip->client->dev, "%s failed to set the als time to 
> %d\n",
> +                     __func__, val);
> +             return ret;
> +     }
> +
> +     /* set chip struct re scaling and saturation */
> +     chip->als_saturation = als_count * 922; /* 90% of full scale */
> +     chip->als_time_scale = (als_time + 25) / 50;
> +
> +     return ret;
> +}
> +
> +static int tsl2583_set_als_gain(struct tsl2583_chip *chip)
> +{
> +     int ret;
> +
> +     /* Set the gain based on taos_settings struct */
> +     ret = i2c_smbus_write_byte_data(chip->client,
> +                                     TSL258X_CMD_REG | TSL258X_GAIN,
> +                                     chip->taos_settings.als_gain);
> +     if (ret < 0)
> +             dev_err(&chip->client->dev, "%s failed to set the gain to %d\n",
> +                     __func__, chip->taos_settings.als_gain);
> +
> +     return ret;
> +}
> +
>  static int tsl2583_set_power_state(struct tsl2583_chip *chip, u8 state)
>  {
>       int ret;
> @@ -371,10 +416,8 @@ static int tsl2583_set_power_state(struct tsl2583_chip 
> *chip, u8 state)
>   */
>  static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev)
>  {
> -     int ret, val;
> -     int als_count;
> -     int als_time;
>       struct tsl2583_chip *chip = iio_priv(indio_dev);
> +     int ret;
>  
>       /* and make sure we're not already on */
>       if (chip->taos_chip_status == TSL258X_CHIP_WORKING) {
> @@ -397,37 +440,13 @@ static int tsl2583_chip_init_and_power_on(struct 
> iio_dev *indio_dev)
>               return ret;
>       }
>  
> -     /* determine als integration register */
> -     als_count = (chip->taos_settings.als_time * 100 + 135) / 270;
> -     if (!als_count)
> -             als_count = 1; /* ensure at least one cycle */
> -
> -     /* convert back to time (encompasses overrides) */
> -     als_time = (als_count * 27 + 5) / 10;
> -
> -     val = 256 - als_count;
> -     ret = i2c_smbus_write_byte_data(chip->client,
> -                                     TSL258X_CMD_REG | TSL258X_ALS_TIME,
> -                                     val);
> -     if (ret < 0) {
> -             dev_err(&chip->client->dev, "%s failed to set the als time to 
> %d\n",
> -                     __func__, val);
> +     ret = tsl2583_set_als_time(chip);
> +     if (ret < 0)
>               return ret;
> -     }
>  
> -     /* Set the gain based on taos_settings struct */
> -     ret = i2c_smbus_write_byte_data(chip->client,
> -                                     TSL258X_CMD_REG | TSL258X_GAIN,
> -                                     chip->taos_settings.als_gain);
> -     if (ret < 0) {
> -             dev_err(&chip->client->dev, "%s failed to set the gain to %d\n",
> -                     __func__, chip->taos_settings.als_gain);
> +     ret = tsl2583_set_als_gain(chip);
> +     if (ret < 0)
>               return ret;
> -     }
> -
> -     /* set chip struct re scaling and saturation */
> -     chip->als_saturation = als_count * 922; /* 90% of full scale */
> -     chip->als_time_scale = (als_time + 25) / 50;
>  
>       usleep_range(3000, 3500);
>  
> @@ -707,7 +726,7 @@ static int tsl2583_write_raw(struct iio_dev *indio_dev,
>                       for (i = 0; i < ARRAY_SIZE(gainadj); i++) {
>                               if (gainadj[i].mean == val) {
>                                       chip->taos_settings.als_gain = i;
> -                                     ret = 0;
> +                                     ret = tsl2583_set_als_gain(chip);
>                                       break;
>                               }
>                       }
> @@ -717,7 +736,7 @@ static int tsl2583_write_raw(struct iio_dev *indio_dev,
>               if (chan->type == IIO_LIGHT && !val && val2 >= 50 &&
>                   val2 <= 650 && !(val2 % 50)) {
>                       chip->taos_settings.als_time = val2;
> -                     ret = 0;
> +                     ret = tsl2583_set_als_time(chip);
>               }
>               break;
>       default:
> 

Reply via email to