Adding additional reset sequence steps required specific
to q6v56 based on version check, along with some trivial
changes in name of local functions.
Signed-off-by: Avaneesh Kumar Dwivedi <akdwi...@codeaurora.org>
---
drivers/remoteproc/qcom_q6v5_pil.c | 132 +++++++++++++++++++++++++++----------
1 file changed, 98 insertions(+), 34 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c
b/drivers/remoteproc/qcom_q6v5_pil.c
index 1fc505b..68eda4f 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -66,6 +66,8 @@
#define QDSP6SS_RESET_REG 0x014
#define QDSP6SS_GFMUX_CTL_REG 0x020
#define QDSP6SS_PWR_CTL_REG 0x030
+#define QDSP6SS_MEM_PWR_CTL 0x0B0
+#define QDSP6SS_STRAP_ACC 0x110
/* AXI Halt Register Offsets */
#define AXI_HALTREQ_REG 0x0
@@ -94,8 +96,14 @@
#define QDSS_BHS_ON BIT(21)
#define QDSS_LDO_BYP BIT(22)
+/* QDSP6v56 parameters */
+#define QDSP6v56_LDO_BYP BIT(25)
+#define QDSP6v56_BHS_ON BIT(24)
#define QDSP6v56_CLAMP_WL BIT(21)
#define QDSP6v56_CLAMP_QMC_MEM BIT(22)
+#define HALT_CHECK_MAX_LOOPS (200)
+#define QDSP6SS_XO_CBCR (0x0038)
+#define QDSP6SS_ACC_OVERRIDE_VAL 0x20
struct q6_rproc_res {
char **proxy_clks;
int proxy_clk_cnt;
@@ -389,7 +397,8 @@ static void pil_mss_restart_reg(struct q6v5 *qproc, u32
mss_restart)
udelay(2);
}
}
-static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
+
+static int q6_load(struct rproc *rproc, const struct firmware *fw)
{
struct q6v5 *qproc = rproc->priv;
@@ -400,10 +409,10 @@ static int q6v5_load(struct rproc *rproc, const struct
firmware *fw)
static const struct rproc_fw_ops q6_fw_ops = {
.find_rsc_table = qcom_mdt_find_rsc_table,
- .load = q6v5_load,
+ .load = q6_load,
};
-static int q6v5_rmb_pbl_wait(struct q6v5 *qproc, int ms)
+static int q6_rmb_pbl_wait(struct q6v5 *qproc, int ms)
{
unsigned long timeout;
s32 val;
@@ -423,7 +432,7 @@ static int q6v5_rmb_pbl_wait(struct q6v5 *qproc, int ms)
return val;
}
-static int q6v5_rmb_mba_wait(struct q6v5 *qproc, u32 status, int ms)
+static int q6_rmb_mba_wait(struct q6v5 *qproc, u32 status, int ms)
{
unsigned long timeout;
@@ -449,40 +458,95 @@ static int q6v5_rmb_mba_wait(struct q6v5 *qproc, u32
status, int ms)
return val;
}
-static int q6v5proc_reset(struct q6v5 *qproc)
+static int q6proc_reset(struct q6v5 *qproc)
{
- u32 val;
- int ret;
+ int ret, i, count;
+ u64 val;
+
+ /* Override the ACC value if required */
+ if (!strcmp(qproc->q6_rproc_res->q6_version, "v56"))
+ writel_relaxed(QDSP6SS_ACC_OVERRIDE_VAL,
+ qproc->reg_base + QDSP6SS_STRAP_ACC);
/* Assert resets, stop core */
- val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
+ val = readl_relaxed(qproc->reg_base + QDSP6SS_RESET_REG);
val |= (Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE);
- writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
+ writel_relaxed(val, qproc->reg_base + QDSP6SS_RESET_REG);
+ /* BHS require xo cbcr to be enabled */
+ if (!strcmp(qproc->q6_rproc_res->q6_version, "v56")) {
+ val = readl_relaxed(qproc->reg_base + QDSP6SS_XO_CBCR);
+ val |= 0x1;
+ writel_relaxed(val, qproc->reg_base + QDSP6SS_XO_CBCR);
+ for (count = HALT_CHECK_MAX_LOOPS; count > 0; count--) {
+ val = readl_relaxed(qproc->reg_base + QDSP6SS_XO_CBCR);
+ if (!(val & BIT(31)))
+ break;
+ udelay(1);
+ }
+
+ val = readl_relaxed(qproc->reg_base + QDSP6SS_XO_CBCR);
+ if ((val & BIT(31)))
+ dev_err(qproc->dev, "Failed to enable xo branch
clock.\n");
+ }
/* Enable power block headswitch, and wait for it to stabilize */
- val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= QDSS_BHS_ON | QDSS_LDO_BYP;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val = readl_relaxed(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= QDSP6v56_BHS_ON;
+ writel_relaxed(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
udelay(1);
- /*
- * Turn on memories. L2 banks should be done individually
- * to minimize inrush current.
- */
- val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N |
- Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= Q6SS_L2DATA_SLP_NRET_N_2;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= Q6SS_L2DATA_SLP_NRET_N_1;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
- val |= Q6SS_L2DATA_SLP_NRET_N_0;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ /* Put LDO in bypass mode */
+ val |= QDSP6v56_LDO_BYP;
+ writel_relaxed(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+ if (!strcmp(qproc->q6_rproc_res->q6_version, "v56")) {
+ /*
+ * Deassert QDSP6 compiler memory clamp
+ */
+ val = readl_relaxed(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val &= ~QDSP6v56_CLAMP_QMC_MEM;
+ writel_relaxed(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+ /* Deassert memory peripheral sleep and L2 memory standby */
+ val |= (Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N);
+ writel_relaxed(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ /* Turn on L1, L2, ETB and JU memories 1 at a time */
+ val = readl_relaxed(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
+ for (i = 19; i >= 0; i--) {
+ val |= BIT(i);
+ writel_relaxed(val, qproc->reg_base +
+ QDSP6SS_MEM_PWR_CTL);
+ /*
+ * Wait for 1us for both memory peripheral and
+ * data array to turn on.
+ */
+ mb();
+ udelay(1);
+ }
+ /* Remove word line clamp */
+ val = readl_relaxed(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val &= ~QDSP6v56_CLAMP_WL;
+ writel_relaxed(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ } else {
+ /*
+ * Turn on memories. L2 banks should be done individually
+ * to minimize inrush current.
+ */
+ val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N |
+ Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= Q6SS_L2DATA_SLP_NRET_N_2;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= Q6SS_L2DATA_SLP_NRET_N_1;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= Q6SS_L2DATA_SLP_NRET_N_0;
+ writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ }
/* Remove IO clamp */
val &= ~Q6SS_CLAMP_IO;
- writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ writel_relaxed(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
/* Bring core out of reset */
val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
@@ -490,9 +554,9 @@ static int q6v5proc_reset(struct q6v5 *qproc)
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
/* Turn on core clock */
- val = readl(qproc->reg_base + QDSP6SS_GFMUX_CTL_REG);
+ val = readl_relaxed(qproc->reg_base + QDSP6SS_GFMUX_CTL_REG);
val |= Q6SS_CLK_ENABLE;
- writel(val, qproc->reg_base + QDSP6SS_GFMUX_CTL_REG);
+ writel_relaxed(val, qproc->reg_base + QDSP6SS_GFMUX_CTL_REG);
/* Start core execution */
val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
@@ -500,7 +564,7 @@ static int q6v5proc_reset(struct q6v5 *qproc)
writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
/* Wait for PBL status */
- ret = q6v5_rmb_pbl_wait(qproc, 1000);
+ ret = q6_rmb_pbl_wait(qproc, 1000);
if (ret == -ETIMEDOUT) {
dev_err(qproc->dev, "PBL boot timed out\n");
} else if (ret != RMB_PBL_SUCCESS) {
@@ -560,7 +624,7 @@ static int q6_mpss_init_image(struct q6v5 *qproc, const
struct firmware *fw)
writel(phys, qproc->rmb_base + RMB_PMI_META_DATA_REG);
writel(RMB_CMD_META_DATA_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
- ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_META_DATA_AUTH_SUCCESS, 1000);
+ ret = q6_rmb_mba_wait(qproc, RMB_MBA_META_DATA_AUTH_SUCCESS, 1000);
if (ret == -ETIMEDOUT)
dev_err(qproc->dev, "MPSS header authentication timed out\n");
else if (ret < 0)
@@ -618,7 +682,7 @@ static int q6_mpss_validate(struct q6v5 *qproc, const
struct firmware *fw)
writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
}
- ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
+ ret = q6_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
if (ret == -ETIMEDOUT)
dev_err(qproc->dev, "MPSS authentication timed out\n");
else if (ret < 0)
@@ -704,11 +768,11 @@ static int q6_start(struct rproc *rproc)
writel_relaxed(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG);
- ret = q6v5proc_reset(qproc);
+ ret = q6proc_reset(qproc);
if (ret)
goto halt_axi_ports;
- ret = q6v5_rmb_mba_wait(qproc, 0, 5000);
+ ret = q6_rmb_mba_wait(qproc, 0, 5000);
if (ret == -ETIMEDOUT) {
dev_err(qproc->dev, "MBA boot timed out\n");
goto halt_axi_ports;
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
