Two more important data integrity fixes related to RAID device drivers
which wrongly throw away the SYNCHRONIZE CACHE command in the non-RAID
path and a memory leak fix in the scsi_debug driver.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Ching Huang (1):
scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware
Ewan D. Milne (1):
scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded
Kashyap Desai (1):
scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough)
devices
And the diffstat:
drivers/scsi/arcmsr/arcmsr_hba.c | 9 ---------
drivers/scsi/megaraid/megaraid_sas_base.c | 13 +++++--------
drivers/scsi/scsi_debug.c | 1 +
3 files changed, 6 insertions(+), 17 deletions(-)
With full diff below.
James
---
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 3d53d63..f0cfb04 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -2636,18 +2636,9 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd
*cmd,
struct AdapterControlBlock *acb = (struct AdapterControlBlock *)
host->hostdata;
struct CommandControlBlock *ccb;
int target = cmd->device->id;
- int lun = cmd->device->lun;
- uint8_t scsicmd = cmd->cmnd[0];
cmd->scsi_done = done;
cmd->host_scribble = NULL;
cmd->result = 0;
- if ((scsicmd == SYNCHRONIZE_CACHE) ||(scsicmd == SEND_DIAGNOSTIC)){
- if(acb->devstate[target][lun] == ARECA_RAID_GONE) {
- cmd->result = (DID_NO_CONNECT << 16);
- }
- cmd->scsi_done(cmd);
- return 0;
- }
if (target == 16) {
/* virtual device for iop message transfer */
arcmsr_handle_virtual_command(acb, cmd);
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c
b/drivers/scsi/megaraid/megaraid_sas_base.c
index 9ff57de..d8b1fbd 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1700,16 +1700,13 @@ megasas_queue_command(struct Scsi_Host *shost, struct
scsi_cmnd *scmd)
goto out_done;
}
- switch (scmd->cmnd[0]) {
- case SYNCHRONIZE_CACHE:
- /*
- * FW takes care of flush cache on its own
- * No need to send it down
- */
+ /*
+ * FW takes care of flush cache on its own for Virtual Disk.
+ * No need to send it down for VD. For JBOD send SYNCHRONIZE_CACHE to
FW.
+ */
+ if ((scmd->cmnd[0] == SYNCHRONIZE_CACHE) && MEGASAS_IS_LOGICAL(scmd)) {
scmd->result = DID_OK << 16;
goto out_done;
- default:
- break;
}
return instance->instancet->build_and_issue_cmd(instance, scmd);
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index c905709..cf04a36 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -5134,6 +5134,7 @@ static void __exit scsi_debug_exit(void)
bus_unregister(&pseudo_lld_bus);
root_device_unregister(pseudo_primary);
+ vfree(map_storep);
vfree(dif_storep);
vfree(fake_storep);
kfree(sdebug_q_arr);
