The test which automatically enables the backup timer on some HP
machines doesn't trigger on other hardware which needs the backup
timer too.
This patch add a way to enable it manually (8250.use_backup_timer=1)
to deal with these machines.
Signed-off-by: Gerd Hoffmann <[EMAIL PROTECTED]>
Cc: Alex Williamson <[EMAIL PROTECTED]>
Cc: Kevin Stansell <[EMAIL PROTECTED]>
---
drivers/serial/8250.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
Index: vanilla-2.6.21-rc2/drivers/serial/8250.c
===================================================================
--- vanilla-2.6.21-rc2.orig/drivers/serial/8250.c
+++ vanilla-2.6.21-rc2/drivers/serial/8250.c
@@ -52,8 +52,8 @@
* is unsafe when used on edge-triggered interrupts.
*/
static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
-
static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
+static unsigned int use_backup_timer;
/*
* Debugging.
@@ -1729,7 +1729,7 @@ static int serial8250_startup(struct uar
* If the interrupt is not reasserted, setup a timer to
* kick the UART on a regular basis.
*/
- if (iir & UART_IIR_NO_INT) {
+ if (iir & UART_IIR_NO_INT || use_backup_timer) {
pr_debug("ttyS%d - using backup timer\n", port->line);
up->timer.function = serial8250_backup_timeout;
up->timer.data = (unsigned long)up;
@@ -2805,6 +2805,9 @@ module_param(share_irqs, uint, 0644);
MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
" (unsafe)");
+module_param(use_backup_timer, uint, 0644);
+MODULE_PARM_DESC(use_backup_timer, "use backup timer");
+
module_param(nr_uarts, uint, 0644);
MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-"
__MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
--
Gerd Hoffmann <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
