From: Eric Jeong <[email protected]> The change is to move pv88080 binding document from the regulator directory to mfd binding directory for PV88080 PMIC MFD support.
Signed-off-by: Eric Jeong <[email protected]> --- This patch applies against linux-next and next-20161026 Hi, Change since PATCH V1 - Patch separated from PATCH V1 Regards, Eric Jeong, Dialog Semiconductor Ltd. Documentation/devicetree/bindings/mfd/pv88080.txt | 63 ++++++++++++++++++++ .../devicetree/bindings/regulator/pv88080.txt | 62 ------------------- 2 files changed, 63 insertions(+), 62 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/pv88080.txt delete mode 100644 Documentation/devicetree/bindings/regulator/pv88080.txt diff --git a/Documentation/devicetree/bindings/mfd/pv88080.txt b/Documentation/devicetree/bindings/mfd/pv88080.txt new file mode 100644 index 0000000..7b556b1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/pv88080.txt @@ -0,0 +1,63 @@ +* Powerventure Semiconductor PV88080 PMIC + +Required properties: +- compatible: Must be one of the following, depending on the + silicon version: + - "pvs,pv88080" (DEPRECATED) + + - "pvs,pv88080-aa" for PV88080 AA or AB silicon + - "pvs,pv88080-ba" for PV88080 BA or BB silicon + NOTE: The use of the compatibles with no silicon version is deprecated. +- reg: I2C slave address, usually 0x49 +- interrupts: the interrupt outputs of the controller +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values listed below. The content of each sub-node is defined by the + standard binding for regulators; see regulator.txt. + BUCK1, BUCK2, BUCK3 and HVBUCK. + +Optional properties: +- Any optional property defined in regulator.txt + and gpio.txt for more information. + +Example: + + pmic: pv88080@49 { + compatible = "pvs,pv88080-ba"; + reg = <0x49>; + interrupt-parent = <&gpio>; + interrupts = <24 24>; + + regulators { + BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = < 220000>; + regulator-max-microamp = <7040000>; + }; + + BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <2193750>; + regulator-min-microamp = <1496000>; + regulator-max-microamp = <4189000>; + }; + + HVBUCK { + regulator-name = "hvbuck"; + regulator-min-microvolt = < 5000>; + regulator-max-microvolt = <1275000>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt b/Documentation/devicetree/bindings/regulator/pv88080.txt deleted file mode 100644 index e6e4b9c8..0000000 --- a/Documentation/devicetree/bindings/regulator/pv88080.txt +++ /dev/null @@ -1,62 +0,0 @@ -* Powerventure Semiconductor PV88080 Voltage Regulator - -Required properties: -- compatible: Must be one of the following, depending on the - silicon version: - - "pvs,pv88080" (DEPRECATED) - - - "pvs,pv88080-aa" for PV88080 AA or AB silicon - - "pvs,pv88080-ba" for PV88080 BA or BB silicon - NOTE: The use of the compatibles with no silicon version is deprecated. -- reg: I2C slave address, usually 0x49 -- interrupts: the interrupt outputs of the controller -- regulators: A node that houses a sub-node for each regulator within the - device. Each sub-node is identified using the node's name, with valid - values listed below. The content of each sub-node is defined by the - standard binding for regulators; see regulator.txt. - BUCK1, BUCK2, BUCK3 and HVBUCK. - -Optional properties: -- Any optional property defined in regulator.txt - -Example: - - pmic: pv88080@49 { - compatible = "pvs,pv88080-ba"; - reg = <0x49>; - interrupt-parent = <&gpio>; - interrupts = <24 24>; - - regulators { - BUCK1 { - regulator-name = "buck1"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1393750>; - regulator-min-microamp = < 220000>; - regulator-max-microamp = <7040000>; - }; - - BUCK2 { - regulator-name = "buck2"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1393750>; - regulator-min-microamp = <1496000>; - regulator-max-microamp = <4189000>; - }; - - BUCK3 { - regulator-name = "buck3"; - regulator-min-microvolt = <1400000>; - regulator-max-microvolt = <2193750>; - regulator-min-microamp = <1496000>; - regulator-max-microamp = <4189000>; - }; - - HVBUCK { - regulator-name = "hvbuck"; - regulator-min-microvolt = < 5000>; - regulator-max-microvolt = <1275000>; - }; - }; - }; - -- end-of-patch for PATCH V2
