Hello all, This series adds a reset controller driver that uses the TI SCI protocol to manage resets.
The TI SCI protocol is used to communicate with power management controllers used by some SoCs. These controllers manage the various power domains, clocks, and resets available on a SoC. This series is based on drivers for TI SCI and the first two controlled elements above, these series can be found here: TI-SCI: http://www.spinics.net/lists/arm-kernel/msg536851.html PM Domains: http://www.spinics.net/lists/devicetree/msg146621.html Clocks: https://www.spinics.net/lists/linux-clk/msg12785.html Thanks, Andrew Andrew F. Davis (3): Documentation: dt: reset: Add TI SCI reset binding dt-bindings: reset: Add K2G reset definitions reset: Add the TI SCI reset driver .../devicetree/bindings/reset/ti,sci-reset.txt | 68 ++++++ MAINTAINERS | 3 + drivers/reset/Kconfig | 9 + drivers/reset/Makefile | 1 + drivers/reset/reset-ti-sci.c | 262 +++++++++++++++++++++ include/dt-bindings/reset/k2g.h | 22 ++ 6 files changed, 365 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/ti,sci-reset.txt create mode 100644 drivers/reset/reset-ti-sci.c create mode 100644 include/dt-bindings/reset/k2g.h -- 2.10.1
