early console in setup code
Probing EDD (edd=off to disable)... ok
early console in extract_kernel
input_data: 0x0304b080
input_len: 0x007314c4
output: 0x01000000
output_len: 0x014bc68c
kernel_total_size: 0x02794000
Physical KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
[    0.000000] Linux version 4.8.0-rc4-00003-gbea5b15 (kbuild@intel11) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #2 Mon Oct 10 15:09:21 CST 2016
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x1000000
[    0.000000] MTRR: Disabled
[    0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] initial memory mapped: [mem 0x00000000-0x0effffff]
[    0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[    0.000000] BRK [0x0e7dc000, 0x0e7dcfff] PGTABLE
[    0.000000] BRK [0x0e7dd000, 0x0e7ddfff] PGTABLE
[    0.000000] BRK [0x0e7de000, 0x0e7defff] PGTABLE
[    0.000000] BRK [0x0e7df000, 0x0e7dffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x13cf1000-0x13fdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6410 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x0000000013FE1780 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x0000000013FE1654 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x0000000013FE0040 001614 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x0000000013FE0000 000040
[    0.000000] ACPI: APIC 0x0000000013FE16C8 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x0000000013FE1748 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13fe0000
[    0.000000]   low ram: 0 - 13fe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13cf0001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 31293599481 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000013fdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000] On node 0 totalpages: 81790
[    0.000000]   Normal zone: 720 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 81790 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] APIC: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr d565b00
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81070
[    0.000000] Kernel command line: ip=::::vm-lkp-wsx03-yocto-i386-23::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-yocto-i386-23/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-bea5b158ff0da9c7246ff391f754f5f38e34577a-20161011-122672-13d4b6x-9.yaml ARCH=i386 kconfig=i386-randconfig-a0-201641 branch=linux-review/Philippe-Reynes/net-usb-lan78xx-use-new-api-ethtool_-get-set-_link_ksettings/20161009-191344 commit=bea5b158ff0da9c7246ff391f754f5f38e34577a BOOT_IMAGE=/pkg/linux/i386-randconfig-a0-201641/gcc-6/bea5b158ff0da9c7246ff391f754f5f38e34577a/vmlinuz-4.8.0-rc4-00003-gbea5b15 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-wsx03-yocto-i386/yocto-tiny-i386-2016-04-22.cgz/i386-randconfig-a0-201641/gcc-6/bea5b158ff0da9c7246ff391f754f5f38e34577a/9 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=er
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 282120K/327160K available (12940K kernel code, 1334K rwdata, 4744K rodata, 728K init, 16476K bss, 45040K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0x947e0000 - 0xffbfe000   (1716 MB)
[    0.000000]     lowmem  : 0x80000000 - 0x93fe0000   ( 319 MB)
[    0.000000]       .init : 0x8d696000 - 0x8d74c000   ( 728 kB)
[    0.000000]       .data : 0x8d0a34b3 - 0x8d694a20   (6085 kB)
[    0.000000]       .text : 0x8c400000 - 0x8d0a34b3   (12941 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Running RCU self tests
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=80090000 soft=80092000
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 4911 kB
[    0.000000]  per task-struct memory footprint: 1344 bytes
[    0.000000] allocated 524288 bytes of page_ext
[    0.000000] ODEBUG: selftest passed
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: HPET/PMTIMER calibration failed
[    0.000000] tsc: Detected 2260.998 MHz processor
[    1.050052] Calibrating delay loop (skipped) preset value.. 4521.99 BogoMIPS (lpj=22609980)
[    1.061558] pid_max: default: 4096 minimum: 301
[    1.068005] ACPI: Core revision 20160422
[    1.123613] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    1.132531] 
[    1.134823] Security Framework initialized
[    1.140435] Yama: becoming mindful.
[    1.145942] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.154787] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.171512] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    1.179515] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    1.187654] CPU: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    1.244937] Performance Events: PMU not available due to virtualization, using software events only.
[    1.316266] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    1.324238] enabled ExtINT on CPU#0
[    1.340406] ENABLING IO-APIC IRQs
[    1.345530] init IO_APIC IRQs
[    1.349680]  apic 0 pin 0 not connected
[    1.355807] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    1.367110] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    1.378005] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    1.389017] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    1.399905] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    1.410795] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    1.421624] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    1.432539] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    1.443464] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    1.454284] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    1.465659] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    1.477229] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    1.488468] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    1.499584] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    1.510636] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    1.521656]  apic 0 pin 16 not connected
[    1.527203]  apic 0 pin 17 not connected
[    1.532582]  apic 0 pin 18 not connected
[    1.538186]  apic 0 pin 19 not connected
[    1.543531]  apic 0 pin 20 not connected
[    1.549071]  apic 0 pin 21 not connected
[    1.554386]  apic 0 pin 22 not connected
[    1.559898]  apic 0 pin 23 not connected
[    1.565853] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.578567] Using local APIC timer interrupts.
[    1.578567] calibrating APIC timer ...
[    1.715573] ... lapic delta = 6248922
[    1.723543] ... PM-Timer delta = 357968
[    1.732003] ... PM-Timer result ok
[    1.739524] ..... delta 6248922
[    1.746519] ..... mult: 268389156
[    1.753615] ..... calibration result: 9998275
[    1.763114] ..... CPU clock speed is 2261.0992 MHz.
[    1.773677] ..... host bus clock speed is 999.8275 MHz.
[    1.790759] devtmpfs: initialized
[    1.824161] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    1.851128] regulator-dummy: no parameters
[    1.862402] regulator-dummy: no parameters
[    1.872096] regulator-dummy: Failed to create debugfs directory
[    1.889402] NET: Registered protocol family 16
[    1.914095] EISA bus registered
[    1.921190] cpuidle: using governor ladder
[    1.941479] ACPI: bus type PCI registered
[    1.954628] PCI: PCI BIOS revision 2.10 entry at 0xfd40f, last bus=0
[    2.181927] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.198754] gpio-f7188x: Not a Fintek device at 0x0000002e
[    2.210870] gpio-f7188x: Not a Fintek device at 0x0000004e
[    2.225065] ACPI: Added _OSI(Module Device)
[    2.234170] ACPI: Added _OSI(Processor Device)
[    2.243731] ACPI: Added _OSI(3.0 _SCP Extensions)
[    2.253801] ACPI: Added _OSI(Processor Aggregator Device)
[    2.301964] ACPI: Interpreter enabled
[    2.310586] ACPI: (supports S0 S3 S5)
[    2.318517] ACPI: Using IOAPIC for interrupt routing
[    2.329800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.489273] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    2.502781] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[    2.515641] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    2.534249] PCI host bridge to bus 0000:00
[    2.543228] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    2.557746] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    2.572259] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    2.588263] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window]
[    2.604306] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.617176] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    2.638559] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    2.661830] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    2.731826] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    2.765467] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    2.781638] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    2.795533] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    2.810860] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    2.829014] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    2.846540] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    2.861934] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    2.883807] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    2.926259] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    2.991178] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    3.106511] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    3.128703] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    3.161955] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    3.194620] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    3.325857] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    3.348064] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    3.381857] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    3.413328] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    3.529080] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    3.551867] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    3.634694] pci_bus 0000:00: on NUMA node 0
[    3.659940] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    3.677204] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    3.693924] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    3.710494] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    3.725521] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    3.748015] ACPI: Enabled 16 GPEs in block 00 to 0F
[    3.769301] vgaarb: setting as boot device: PCI:0000:00:02.0
[    3.781782] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    3.799766] vgaarb: loaded
[    3.805929] vgaarb: bridge control possible 0000:00:02.0
[    3.827124] ACPI: bus type USB registered
[    3.836774] usbcore: registered new interface driver usbfs
[    3.849576] usbcore: registered new interface driver hub
[    3.861794] usbcore: registered new device driver usb
[    3.875795] media: Linux media interface: v0.10
[    3.886619] Linux video capture interface: v2.00
[    3.897832] pps_core: LinuxPPS API ver. 1 registered
[    3.909079] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.929454] PTP clock support registered
[    3.940089] FPGA manager framework
[    3.948129] PCI: Using ACPI for IRQ routing
[    3.957299] PCI: pci_cache_line_size set to 32 bytes
[    3.970163] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    3.983543] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff]
[    4.003473] Bluetooth: Core ver 2.21
[    4.012125] NET: Registered protocol family 31
[    4.022134] Bluetooth: HCI device and connection manager initialized
[    4.036176] Bluetooth: HCI socket layer initialized
[    4.047255] Bluetooth: L2CAP socket layer initialized
[    4.058887] Bluetooth: SCO socket layer initialized
[    4.070256] NET: Registered protocol family 8
[    4.080109] NET: Registered protocol family 20
[    4.092780] workqueue: round-robin CPU selection forced, expect performance impact
[    4.112261] NetLabel: Initializing
[    4.119967] NetLabel:  domain hash size = 128
[    4.129760] NetLabel:  protocols = UNLABELED CIPSOv4
[    4.141521] NetLabel:  unlabeled traffic allowed by default
[    4.167478] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    4.184036] clocksource: Switched to clocksource kvm-clock
[    4.200302] FS-Cache: Loaded
[    4.208705] pnp: PnP ACPI init
[    4.217840] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    4.234300] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    4.249822] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    4.264701] pnp 00:03: [dma 2]
[    4.272665] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    4.288975] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    4.305955] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.322060] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.342218] pnp: PnP ACPI: found 7 devices
[    4.400838] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.420673] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    4.434181] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    4.447919] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    4.463093] pci_bus 0000:00: resource 7 [mem 0x14000000-0xfebfffff window]
[    4.479228] NET: Registered protocol family 2
[    4.493874] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    4.509951] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[    4.526734] TCP: Hash tables configured (established 4096 bind 4096)
[    4.541311] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    4.555018] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    4.571167] NET: Registered protocol family 1
[    4.586165] RPC: Registered named UNIX socket transport module.
[    4.599612] RPC: Registered udp transport module.
[    4.610015] RPC: Registered tcp transport module.
[    4.620615] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.634936] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    4.648192] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    4.661180] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    4.675471] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    4.694634] PCI: CLS 0 bytes, default 32
[    4.706981] Unpacking initramfs...
[    9.498436] debug: unmapping init [mem 0x93cf1000-0x93fdffff]
[    9.522544] has_svm: not amd
[    9.529959] kvm: no hardware support
[    9.545479] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    9.561297] apm: overridden by ACPI.
[    9.576759] cryptomgr_test (21) used greatest stack depth: 7128 bytes left
[    9.601138] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    9.628683] spin_lock-torture: Creating torture_shuffle task
[    9.639304] spin_lock-torture: Creating torture_stutter task
[    9.651263] spin_lock-torture: torture_shuffle task started
[    9.663550] spin_lock-torture: Creating lock_torture_writer task
[    9.676123] spin_lock-torture: torture_stutter task started
[    9.688243] spin_lock-torture: Creating lock_torture_writer task
[    9.700750] spin_lock-torture: lock_torture_writer task started
[    9.716027] spin_lock-torture: Creating lock_torture_stats task
[    9.728569] spin_lock-torture: lock_torture_writer task started
[    9.747657] torture_init_begin: Refusing rcu init: spin_lock running.
[    9.761166] spin_lock-torture: lock_torture_stats task started
[    9.773510] torture_init_begin: One torture test at a time!
[    9.792183] futex hash table entries: 16 (order: -3, 704 bytes)
[    9.810588] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    9.825751] zbud: loaded
[    9.837907] DLM installed
[    9.855308] NFS: Registering the id_resolver key type
[    9.866890] Key type id_resolver registered
[    9.875852] Key type id_legacy registered
[    9.902695] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    9.915888] orangefs_init: called with debug mask: :none: :0:
[    9.929891] orangefs: module version upstream loaded
[    9.940811] FS-Cache: Netfs 'ceph' registered for caching
[    9.952147] ceph: loaded (mds proto 32)
[   10.005948] NET: Registered protocol family 38
[   10.016154] test_string_helpers: Running tests...
[   10.096164] test_firmware: interface ready
[   10.105394] Running rhashtable test nelem=8, max_size=0, shrinking=0
[   10.118585] Test 00:
[   10.134854]   Adding 50000 keys
[   11.176176]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   11.748659]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   11.774259]   Deleting 50000 keys
[   12.175213]   Duration of test: 2033688587 ns
[   12.184745] Test 01:
[   12.195823]   Adding 50000 keys
[   13.114290]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   13.677703]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   13.693191]   Deleting 50000 keys
[   14.078525]   Duration of test: 1876057469 ns
[   14.089414] Test 02:
[   14.101928]   Adding 50000 keys
[   15.051455]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   15.647983]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   15.668006]   Deleting 50000 keys
[   16.051249]   Duration of test: 1942028840 ns
[   16.061045] Test 03:
[   16.072769]   Adding 50000 keys
[   16.956163]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   17.574024]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   17.594082]   Deleting 50000 keys
[   18.028677]   Duration of test: 1949129658 ns
[   18.038984] Average test time: 1950226138
[   18.048966] Testing concurrent rhashtable access from 10 threads
[   58.012300] rhashtable_thra (101) used greatest stack depth: 7060 bytes left
[   58.057934] rhashtable_thra (105) used greatest stack depth: 7036 bytes left
[   58.074778] rhashtable_thra (104) used greatest stack depth: 7028 bytes left
[   58.100830] rhashtable_thra (107) used greatest stack depth: 6880 bytes left
[   58.116784] Started 10 threads, 0 failed
[   58.138683] test_uuid: all 18 tests passed
[   58.154919] rbtree testing -> 166733 cycles
[   66.024017] augmented rbtree testing -> 234758 cycles
[   77.078532] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[   77.095001] gpio_it87: no device
[   77.112006] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   77.125783] ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6
[   77.141827] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   77.158378] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   77.177496] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[   77.191044] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[   77.212013] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[   77.229775] vmlfb: initializing
[   77.238621] Could not find Carillo Ranch MCH device.
[   77.251453] no IO addresses supplied
[   77.261663] hgafb: HGA card not detected.
[   77.271903] hgafb: probe of hgafb.0 failed with error -22
[   77.287746] usbcore: registered new interface driver udlfb
[   77.310272] uvesafb: failed to execute /sbin/v86d
[   77.321680] uvesafb: make sure that the v86d helper is installed and executable
[   77.339437] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[   77.355020] uvesafb: vbe_init() failed with -22
[   77.366006] uvesafb: probe of uvesafb.0 failed with error -22
[   77.381105] ipmi message handler version 39.2
[   77.391835] ipmi device interface
[   77.401072] IPMI System Interface driver.
[   77.411696] ipmi_si: Unable to find any System Interface(s)
[   77.424889] IPMI SSIF Interface driver
[   77.434551] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[   77.456226] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   77.474665] ACPI: Power Button [PWRF]
[   77.494303] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[   77.512510] ACPI: Power Button [PWRF]
[   79.615122] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[   79.630056] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[   83.375596] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[   83.393746] xenfs: not registering filesystem on non-xen platform
[   84.011567] r3964: Philips r3964 Driver $Revision: 1.10 $
[   84.022967] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   84.037266] serial 00:05: GPIO lookup for consumer cts
[   84.047889] serial 00:05: using ACPI for GPIO lookup
[   84.058194] acpi PNP0501:00: GPIO: looking up cts-gpios
[   84.069059] acpi PNP0501:00: GPIO: looking up cts-gpio
[   84.080488] acpi PNP0501:00: GPIO: looking up 0 in _CRS
[   84.091578] serial 00:05: using lookup tables for GPIO lookup
[   84.103906] serial 00:05: lookup for GPIO cts failed
[   84.112729] serial 00:05: GPIO lookup for consumer dsr
[   84.122704] serial 00:05: using ACPI for GPIO lookup
[   84.131845] acpi PNP0501:00: GPIO: looking up dsr-gpios
[   84.141434] acpi PNP0501:00: GPIO: looking up dsr-gpio
[   84.149470] serial 00:05: using lookup tables for GPIO lookup
[   84.159069] serial 00:05: lookup for GPIO dsr failed
[   84.168915] serial 00:05: GPIO lookup for consumer dcd
[   84.178213] serial 00:05: using ACPI for GPIO lookup
[   84.186641] acpi PNP0501:00: GPIO: looking up dcd-gpios
[   84.195616] acpi PNP0501:00: GPIO: looking up dcd-gpio
[   84.204302] serial 00:05: using lookup tables for GPIO lookup
[   84.214709] serial 00:05: lookup for GPIO dcd failed
[   84.223783] serial 00:05: GPIO lookup for consumer rng
[   84.233401] serial 00:05: using ACPI for GPIO lookup
[   84.242480] acpi PNP0501:00: GPIO: looking up rng-gpios
[   84.250898] acpi PNP0501:00: GPIO: looking up rng-gpio
[   84.258904] serial 00:05: using lookup tables for GPIO lookup
[   84.268109] serial 00:05: lookup for GPIO rng failed
[   84.276571] serial 00:05: GPIO lookup for consumer rts
[   84.285512] serial 00:05: using ACPI for GPIO lookup
[   84.293909] acpi PNP0501:00: GPIO: looking up rts-gpios
[   84.306315] acpi PNP0501:00: GPIO: looking up rts-gpio
[   84.324822] serial 00:05: using lookup tables for GPIO lookup
[   84.352788] serial 00:05: lookup for GPIO rts failed
[   84.367062] serial 00:05: GPIO lookup for consumer dtr
[   84.374864] serial 00:05: using ACPI for GPIO lookup
[   84.383719] acpi PNP0501:00: GPIO: looking up dtr-gpios
[   84.394637] acpi PNP0501:00: GPIO: looking up dtr-gpio
[   84.405393] serial 00:05: using lookup tables for GPIO lookup
[   84.415668] serial 00:05: lookup for GPIO dtr failed
[   84.541028] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   84.573834] console [ttyS0] disabled
[   84.660673] console [ttyS0] enabled
[   84.671728] serial 00:06: GPIO lookup for consumer cts
[   84.679792] serial 00:06: using ACPI for GPIO lookup
[   84.687513] acpi PNP0501:01: GPIO: looking up cts-gpios
[   84.695905] acpi PNP0501:01: GPIO: looking up cts-gpio
[   84.703873] acpi PNP0501:01: GPIO: looking up 0 in _CRS
[   84.712230] serial 00:06: using lookup tables for GPIO lookup
[   84.721173] serial 00:06: lookup for GPIO cts failed
[   84.729022] serial 00:06: GPIO lookup for consumer dsr
[   84.737051] serial 00:06: using ACPI for GPIO lookup
[   84.744774] acpi PNP0501:01: GPIO: looking up dsr-gpios
[   84.752673] acpi PNP0501:01: GPIO: looking up dsr-gpio
[   84.760579] serial 00:06: using lookup tables for GPIO lookup
[   84.770309] serial 00:06: lookup for GPIO dsr failed
[   84.779059] serial 00:06: GPIO lookup for consumer dcd
[   84.804394] serial 00:06: using ACPI for GPIO lookup
[   84.812372] acpi PNP0501:01: GPIO: looking up dcd-gpios
[   84.820047] acpi PNP0501:01: GPIO: looking up dcd-gpio
[   84.830838] serial 00:06: using lookup tables for GPIO lookup
[   84.843737] serial 00:06: lookup for GPIO dcd failed
[   84.854268] serial 00:06: GPIO lookup for consumer rng
[   84.865647] serial 00:06: using ACPI for GPIO lookup
[   84.876562] acpi PNP0501:01: GPIO: looking up rng-gpios
[   84.888033] acpi PNP0501:01: GPIO: looking up rng-gpio
[   84.899249] serial 00:06: using lookup tables for GPIO lookup
[   84.911953] serial 00:06: lookup for GPIO rng failed
[   84.921479] serial 00:06: GPIO lookup for consumer rts
[   84.929552] serial 00:06: using ACPI for GPIO lookup
[   84.937002] acpi PNP0501:01: GPIO: looking up rts-gpios
[   84.944908] acpi PNP0501:01: GPIO: looking up rts-gpio
[   84.952457] serial 00:06: using lookup tables for GPIO lookup
[   84.960955] serial 00:06: lookup for GPIO rts failed
[   84.968173] serial 00:06: GPIO lookup for consumer dtr
[   84.975534] serial 00:06: using ACPI for GPIO lookup
[   84.983597] acpi PNP0501:01: GPIO: looking up dtr-gpios
[   84.991408] acpi PNP0501:01: GPIO: looking up dtr-gpio
[   84.999736] serial 00:06: using lookup tables for GPIO lookup
[   85.009265] serial 00:06: lookup for GPIO dtr failed
[   85.100260] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   85.119163] serial 00:06: GPIO lookup for consumer cts
[   85.128496] serial 00:06: using ACPI for GPIO lookup
[   85.137277] acpi PNP0501:01: GPIO: looking up cts-gpios
[   85.146379] acpi PNP0501:01: GPIO: looking up cts-gpio
[   85.155257] acpi PNP0501:01: GPIO: looking up 0 in _CRS
[   85.164393] serial 00:06: using lookup tables for GPIO lookup
[   85.174247] serial 00:06: lookup for GPIO cts failed
[   85.182607] serial 00:06: GPIO lookup for consumer dsr
[   85.191555] serial 00:06: using ACPI for GPIO lookup
[   85.200112] acpi PNP0501:01: GPIO: looking up dsr-gpios
[   85.209049] acpi PNP0501:01: GPIO: looking up dsr-gpio
[   85.217741] serial 00:06: using lookup tables for GPIO lookup
[   85.225614] serial 00:06: lookup for GPIO dsr failed
[   85.231772] serial 00:06: GPIO lookup for consumer dcd
[   85.238795] serial 00:06: using ACPI for GPIO lookup
[   85.250138] acpi PNP0501:01: GPIO: looking up dcd-gpios
[   85.262263] acpi PNP0501:01: GPIO: looking up dcd-gpio
[   85.273932] serial 00:06: using lookup tables for GPIO lookup
[   85.285299] serial 00:06: lookup for GPIO dcd failed
[   85.295020] serial 00:06: GPIO lookup for consumer rng
[   85.304782] serial 00:06: using ACPI for GPIO lookup
[   85.311491] acpi PNP0501:01: GPIO: looking up rng-gpios
[   85.321268] acpi PNP0501:01: GPIO: looking up rng-gpio
[   85.331475] serial 00:06: using lookup tables for GPIO lookup
[   85.344729] serial 00:06: lookup for GPIO rng failed
[   85.357016] serial 00:06: GPIO lookup for consumer rts
[   85.369918] serial 00:06: using ACPI for GPIO lookup
[   85.384603] acpi PNP0501:01: GPIO: looking up rts-gpios
[   85.397142] acpi PNP0501:01: GPIO: looking up rts-gpio
[   85.410885] serial 00:06: using lookup tables for GPIO lookup
[   85.425762] serial 00:06: lookup for GPIO rts failed
[   85.438844] serial 00:06: GPIO lookup for consumer dtr
[   85.454246] serial 00:06: using ACPI for GPIO lookup
[   85.467007] acpi PNP0501:01: GPIO: looking up dtr-gpios
[   85.479028] acpi PNP0501:01: GPIO: looking up dtr-gpio
[   85.490757] serial 00:06: using lookup tables for GPIO lookup
[   85.504594] serial 00:06: lookup for GPIO dtr failed
[   85.607674] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   85.676184] Initializing Nozomi driver 2.1d
[   85.691194] lp: driver loaded but no devices found
[   85.704019] DoubleTalk PC - not found
[   85.713586] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   85.734834] Non-volatile memory driver v1.3
[   85.744623] toshiba: not a supported Toshiba laptop
[   85.758636] ppdev: user-space parallel port driver
[   85.768416] telclk_interrupt = 0xf non-mcpbl0010 hw.
[   85.779472] smapi::smapi_init, ERROR invalid usSmapiID
[   85.790424] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[   85.809829] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[   85.825133] mwave: mwavedd::mwave_init: Error: Failed to initialize
[   85.838316] Linux agpgart interface v0.103
[   85.866937] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[   85.881224] dummy-irq: no IRQ given.  Use irq=N
[   85.892534] Phantom Linux Driver, version n0.9.8, init OK
[   85.906176] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[   85.925106] c2port c2port0: C2 port uc added
[   85.934304] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[   85.954686] Guest personality initialized and is inactive
[   85.969983] VMCI host device registered (name=vmci, major=10, minor=56)
[   85.984011] Initialized host personality
[   85.992868] panel: driver version 0.9.5 not yet registered
[   86.004857] usbcore: registered new interface driver rtsx_usb
[   86.029549] mtdoops: mtd device (mtddev=name/number) must be supplied
[   86.043313] device id = 2440
[   86.049672] device id = 2480
[   86.055886] device id = 24c0
[   86.061989] device id = 24d0
[   86.068371] device id = 25a1
[   86.074784] device id = 2670
[   86.081851] slram: not enough parameters.
[   86.093056] vcan: Virtual CAN interface driver
[   86.102622] slcan: serial line CAN interface driver
[   86.113029] slcan: 10 dynamic interface channels.
[   86.123075] CAN device driver interface
[   86.130776] usbcore: registered new interface driver ems_usb
[   86.139632] usbcore: registered new interface driver peak_usb
[   86.148570] usbcore: registered new interface driver usb_8dev
[   86.157778] cc770: CAN netdevice driver
[   86.163473] cc770_isa: insufficient parameters supplied
[   86.180529] Databook TCIC-2 PCMCIA probe: not found.
[   86.196762] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   86.210109] ohci-platform: OHCI generic platform driver
[   86.221292] driver u132_hcd
[   86.228609] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[   86.241184] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[   86.262840] usbcore: registered new interface driver cdc_acm
[   86.275086] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   86.292683] usbcore: registered new interface driver usblp
[   86.305481] usbcore: registered new interface driver usbtmc
[   86.318025] usbcore: registered new interface driver cytherm
[   86.330666] usbcore: registered new interface driver emi62 - firmware loader
[   86.354315] ftdi_elan: driver ftdi-elan
[   86.368445] usbcore: registered new interface driver ftdi-elan
[   86.381219] usbcore: registered new interface driver idmouse
[   86.393987] usbcore: registered new interface driver iowarrior
[   86.406818] usbcore: registered new interface driver isight_firmware
[   86.420688] usbcore: registered new interface driver usblcd
[   86.435051] usbcore: registered new interface driver legousbtower
[   86.448371] usbcore: registered new interface driver usbtest
[   86.460676] usbcore: registered new interface driver trancevibrator
[   86.474419] usbcore: registered new interface driver usbsevseg
[   86.488228] usbcore: registered new interface driver lvs
[   86.501185] usbcore: registered new interface driver cxacru
[   86.513401] usbcore: registered new interface driver speedtch
[   86.525786] usbcore: registered new interface driver ueagle-atm
[   86.543708] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[   86.559750] dummy_hcd dummy_hcd.0: Dummy host controller
[   86.576762] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[   86.609808] hub 1-0:1.0: USB hub found
[   86.619080] hub 1-0:1.0: 1 port detected
[   86.637661] hub 1-0:1.0: USB hub found
[   86.646117] hub 1-0:1.0: 1 port detected
[   86.670516] hub 1-0:1.0: USB hub found
[   86.678944] hub 1-0:1.0: 1 port detected
[   86.689504] hub 1-0:1.0: USB hub found
[   86.697800] hub 1-0:1.0: 1 port detected
[   86.713552] dummy_hcd dummy_hcd.0: remove, state 1
[   86.724995] usb usb1: USB disconnect, device number 1
[   86.751789] dummy_hcd dummy_hcd.0: stopped
[   86.760829] dummy_hcd dummy_hcd.0: USB bus 1 deregistered
[   86.777322] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[   86.793075] dummy_hcd dummy_hcd.0: Dummy host controller
[   86.806239] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[   86.838593] hub 1-0:1.0: USB hub found
[   86.846757] hub 1-0:1.0: 1 port detected
[   86.861439] hub 1-0:1.0: USB hub found
[   86.870019] hub 1-0:1.0: 1 port detected
[   86.884537] hub 1-0:1.0: USB hub found
[   86.892704] hub 1-0:1.0: 1 port detected
[   86.906323] hub 1-0:1.0: USB hub found
[   86.913997] hub 1-0:1.0: 1 port detected
[   86.939210] kobject (922508b4): tried to init an initialized object, something is seriously wrong.
[   86.963866] CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.0-rc4-00003-gbea5b15 #2
[   86.981948] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   86.998513]  922508b4 922508b4 80031d20 8c7b56c9 80031d3c 8c7b7dd3 8d4316d4 922508b4
[   87.011599]  92250868 8d5b8c6c 922508ac 80031d4c 8c983cce 92250868 922508ac 80031d58
[   87.025144]  8c9844bb 92250868 80031d84 8caf3c1d 00000000 8d463eac 00000000 8004f6b0
[   87.039181] Call Trace:
[   87.045925] hub 1-0:1.0: activate --> -113
[   87.054308]  [<8c7b56c9>] dump_stack+0x16/0x1d
[   87.061221]  [<8c7b7dd3>] kobject_init+0x73/0x80
[   87.069607]  [<8c983cce>] device_initialize+0x1e/0xe0
[   87.078555]  [<8c9844bb>] device_register+0xb/0x20
[   87.085778]  [<8caf3c1d>] usb_add_gadget_udc_release+0x8d/0x270
[   87.095048]  [<8caf3e9a>] usb_add_gadget_udc+0xa/0x10
[   87.103629]  [<8caf775e>] dummy_udc_probe+0x14e/0x1a0
[   87.111472]  [<8c989781>] platform_drv_probe+0x31/0x90
[   87.118765]  [<8c9875aa>] ? driver_sysfs_add+0x6a/0x90
[   87.125607]  [<8c987e3a>] driver_probe_device+0x12a/0x490
[   87.132450]  [<8c8bc39b>] ? acpi_driver_match_device+0x36/0x50
[   87.140188]  [<8c988307>] __device_attach_driver+0x77/0x110
[   87.147841]  [<8d09712d>] ? klist_next+0x6d/0x10c
[   87.154259]  [<8c988290>] ? __driver_attach+0xf0/0xf0
[   87.160991]  [<8c9864f7>] bus_for_each_drv+0x47/0x80
[   87.167830]  [<8c987b85>] __device_attach+0xb5/0x130
[   87.174578]  [<8c988290>] ? __driver_attach+0xf0/0xf0
[   87.181276]  [<8c9883cd>] device_initial_probe+0xd/0x10
[   87.188316]  [<8c986787>] bus_probe_device+0x77/0x80
[   87.195082]  [<8c98417e>] device_add+0x34e/0x5a0
[   87.201236]  [<8c7c4840>] ? kvasprintf_const+0x40/0x90
[   87.208206]  [<8c7b7d1b>] ? kobject_set_name_vargs+0x6b/0x90
[   87.215924]  [<8c989e6c>] platform_device_add+0xfc/0x280
[   87.222985]  [<8d6d0b84>] init+0x20b/0x2ec
[   87.228620]  [<8d6d0979>] ? usb_udc_init+0x3f/0x3f
[   87.235201]  [<8d696c1d>] do_one_initcall+0x7c/0xfb
[   87.241716]  [<8d696d5e>] ? kernel_init_freeable+0xc2/0x15e
[   87.249468]  [<8d696d81>] kernel_init_freeable+0xe5/0x15e
[   87.257858]  [<8d0974fb>] kernel_init+0xb/0x100
[   87.266182]  [<8c4c727c>] ? schedule_tail+0xc/0x50
[   87.276843]  [<8d0a1942>] ret_from_kernel_thread+0xe/0x24
[   87.288157]  [<8d0974f0>] ? rest_init+0x110/0x110
[   87.304817] BUG: unable to handle kernel paging request at 91de0a00
[   87.320269] IP: [<8c578f51>] slob_page_alloc+0x51/0x310
[   87.327793] *pdpt = 000000000d74c001 *pde = 0000000013be9067 *pte = 0000000011de0060 
[   87.338640] Oops: 0000 [#1] DEBUG_PAGEALLOC
[   87.344191] CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.0-rc4-00003-gbea5b15 #2
[   87.358120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   87.378699] task: 80024000 task.stack: 80030000
[   87.389296] EIP: 0060:[<8c578f51>] EFLAGS: 00210006 CPU: 0
[   87.402162] EIP is at slob_page_alloc+0x51/0x310
[   87.412986] EAX: 91de0a00 EBX: 91ddf000 ECX: 00000008 EDX: 00000d00
[   87.427438] ESI: 00000000 EDI: 0000000a EBP: 80031cd0 ESP: 80031ca8
[   87.440526]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[   87.448497] CR0: 80050033 CR2: 91de0a00 CR3: 0d750000 CR4: 000006b0
[   87.457803] Stack:
[   87.460947]  00000015 939de35c fffffff8 00000007 91ddfa08 91ddfa08 0000000a 939de35c
[   87.473905]  8d574470 0000000a 80031cf8 8c5797fb 8d574470 00200296 00000008 024000c0
[   87.486679]  00000014 024000c0 0000000c 0000000c 80031d08 8c5799ef 0000000b 91ddf2c8
[   87.499706] Call Trace:
[   87.503621]  [<8c5797fb>] slob_alloc+0x13b/0x210
[   87.510784]  [<8c5799ef>] __kmalloc_track_caller+0x7f/0xa0
[   87.519181]  [<8c5536cf>] kstrdup+0x2f/0xb0
[   87.525696]  [<8c553768>] kstrdup_const+0x18/0x20
[   87.533311]  [<8c7c4859>] kvasprintf_const+0x59/0x90
[   87.538822]  [<8c7b7cd4>] kobject_set_name_vargs+0x24/0x90
[   87.544773]  [<8c983dd4>] dev_set_name+0x14/0x20
[   87.549153]  [<8caf3c8c>] usb_add_gadget_udc_release+0xfc/0x270
[   87.554851]  [<8caf3e9a>] usb_add_gadget_udc+0xa/0x10
[   87.559585]  [<8caf775e>] dummy_udc_probe+0x14e/0x1a0
[   87.564479]  [<8c989781>] platform_drv_probe+0x31/0x90
[   87.569308]  [<8c9875aa>] ? driver_sysfs_add+0x6a/0x90
[   87.574823]  [<8c987e3a>] driver_probe_device+0x12a/0x490
[   87.579875]  [<8c8bc39b>] ? acpi_driver_match_device+0x36/0x50
[   87.586389]  [<8c988307>] __device_attach_driver+0x77/0x110
[   87.594488]  [<8d09712d>] ? klist_next+0x6d/0x10c
[   87.601202]  [<8c988290>] ? __driver_attach+0xf0/0xf0
[   87.608297]  [<8c9864f7>] bus_for_each_drv+0x47/0x80
[   87.616395]  [<8c987b85>] __device_attach+0xb5/0x130
[   87.625172]  [<8c988290>] ? __driver_attach+0xf0/0xf0
[   87.636129]  [<8c9883cd>] device_initial_probe+0xd/0x10
[   87.644983]  [<8c986787>] bus_probe_device+0x77/0x80
[   87.652080]  [<8c98417e>] device_add+0x34e/0x5a0
[   87.658976]  [<8c7c4840>] ? kvasprintf_const+0x40/0x90
[   87.666201]  [<8c7b7d1b>] ? kobject_set_name_vargs+0x6b/0x90
[   87.674180]  [<8c989e6c>] platform_device_add+0xfc/0x280
[   87.681915]  [<8d6d0b84>] init+0x20b/0x2ec
[   87.687878]  [<8d6d0979>] ? usb_udc_init+0x3f/0x3f
[   87.694595]  [<8d696c1d>] do_one_initcall+0x7c/0xfb
[   87.701597]  [<8d696d5e>] ? kernel_init_freeable+0xc2/0x15e
[   87.709504]  [<8d696d81>] kernel_init_freeable+0xe5/0x15e
[   87.717145]  [<8d0974fb>] kernel_init+0xb/0x100
[   87.723464]  [<8c4c727c>] ? schedule_tail+0xc/0x50
[   87.730273]  [<8d0a1942>] ret_from_kernel_thread+0xe/0x24
[   87.737882]  [<8d0974f0>] ? rest_init+0x110/0x110
[   87.744784] Code: c7 45 e8 00 00 00 00 c7 45 ec 00 00 00 00 89 7d e0 eb 18 8d b4 26 00 00 00 00 0f bf 50 02 89 45 ec 8d 04 53 a9 fe 0f 00 00 74 47 <0f> bf 10 85 d2 0f bf da 7e 4d 85 c9 74 12 8b 7d e4 8d 34 07 8b
[   87.782796] EIP: [<8c578f51>] slob_page_alloc+0x51/0x310 SS:ESP 0068:80031ca8
[   87.792812] CR2: 0000000091de0a00
[   87.797386] ---[ end trace 2cbfe4328fe5aef9 ]---
[   87.804184] Kernel panic - not syncing: Fatal exception
[   87.811543] Kernel Offset: 0xb400000 from 0x81000000 (relocation range: 0x80000000-0x947dffff)

Elapsed time: 120

initrds=(
	/osimage/yocto/yocto-tiny-i386-2016-04-22.cgz
	/lkp/scheduled/vm-lkp-wsx03-yocto-i386-23/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-bea5b158ff0da9c7246ff391f754f5f38e34577a-20161011-122672-13d4b6x-9.cgz
	/lkp/lkp/lkp-i386.cgz
	/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig.i386_2016-09-03.cgz
	/osimage/pkg/static/trinity-i386.cgz
)

cat "${initrds[@]}" > /fs/sdc1/initrd-vm-lkp-wsx03-yocto-i386-23

kvm=(
	qemu-system-i386
	-enable-kvm
	-kernel /pkg/linux/i386-randconfig-a0-201641/gcc-6/bea5b158ff0da9c7246ff391f754f5f38e34577a/vmlinuz-4.8.0-rc4-00003-gbea5b15
	-initrd /fs/sdc1/initrd-vm-lkp-wsx03-yocto-i386-23
	-m 320
	-smp 2
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-drive file=/fs/sdc1/disk0-vm-lkp-wsx03-yocto-i386-23,media=disk,if=virtio
	-pidfile /dev/shm/kboot/pid-vm-lkp-wsx03-yocto-i386-23
	-serial file:/dev/shm/kboot/vm-lkp-wsx03-yocto-i386-23/serial
	-serial file:/dev/shm/kboot/vm-lkp-wsx03-yocto-i386-23/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-wsx03-yocto-i386-23::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-wsx03-yocto-i386-23/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-bea5b158ff0da9c7246ff391f754f5f38e34577a-20161011-122672-13d4b6x-9.yaml
	ARCH=i386
	kconfig=i386-randconfig-a0-201641
	branch=linux-review/Philippe-Reynes/net-usb-lan78xx-use-new-api-ethtool_-get-set-_link_ksettings/20161009-191344
	commit=bea5b158ff0da9c7246ff391f754f5f38e34577a
	BOOT_IMAGE=/pkg/linux/i386-randconfig-a0-201641/gcc-6/bea5b158ff0da9c7246ff391f754f5f38e34577a/vmlinuz-4.8.0-rc4-00003-gbea5b15
	max_uptime=1500
	RESULT_ROOT=/result/trinity/300s/vm-lkp-wsx03-yocto-i386/yocto-tiny-i386-2016-04-22.cgz/i386-randconfig-a0-201641/gcc-6/bea5b158ff0da9c7246ff391f754f5f38e34577a/9
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
