On Wed, Sep 28, 2016 at 01:21:51PM -0500, Alan Tull wrote:
> Add bindings document for the Altera Freeze Bridge.  A Freeze
> Bridge is used to gate traffic to/from a region of a FPGA
> such that that region can be reprogrammed.  The Freeze Bridge
> exist in FPGA fabric that is not currently being reconfigured.
> 
> Signed-off-by: Alan Tull <at...@opensource.altera.com>
> Signed-off-by: Matthew Gerlach <mgerl...@opensource.altera.com>
> ---
> v19: Added in v19 of patchset, uses fpga image info struct
> ---
>  .../bindings/fpga/altera-freeze-bridge.txt         | 23 
> ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>  create mode 100644 
> Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
> 
> diff --git a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt 
> b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
> new file mode 100644
> index 0000000..97ecc11
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
> @@ -0,0 +1,23 @@
> +Altera Freeze Bridge Controller Driver
> +
> +The Altera Freeze Bridge Controller manages one or more freeze bridges.
> +The controller can freeze/disable the bridges which prevents signal
> +changes from passing through the bridge.  The controller can also
> +unfreeze/enable the bridges which allows traffic to pass through the
> +bridge normally.
> +
> +Required properties:
> +- compatible         : Should contain "altr,freeze-bridge-controller"

Only one version of the h/w?

> +- regs                       : base address and size for freeze bridge module
> +
> +Optional properties:
> +- bridge-enable              : 0 if driver should disable bridge at startup
> +                       1 if driver should enable bridge at startup
> +                       Default is to leave bridge in current state.
> +
> +Example:
> +     freeze_controller@100000450 {

Underscore...

> +             compatible = "altr,freeze-bridge-controller";
> +             regs = <0x1000 0x10>;
> +             bridge-enable = <0>;
> +     };
> -- 
> 2.9.3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to