The A31 SoC's codec has various inputs, outputs and microphone bias
supplies. These can be routed on the board in different ways, such as:
  - Microphones all use the MBIAS main microphone supply or one mic may
    use the HBIAS supply, which supports headset detection and buttons.

  - Line Out may be routed to an audio jack, or an onboard speaker amp
    with power controls.

Add support for specifying the audio routes in the device tree.

Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
 .../devicetree/bindings/sound/sun4i-codec.txt      | 35 ++++++++++++++++++++++
 sound/soc/sunxi/sun4i-codec.c                      | 21 +++++++++++--
 2 files changed, 54 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt 
b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index 1d2411cea98d..893f37413943 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -19,6 +19,32 @@ Required properties:
 Optional properties:
 - allwinner,pa-gpios: gpio to enable external amplifier
 
+Required properties for "allwinner,sun6i-a31-codec":
+- allwinner,audio-routing: A list of the connections between audio components.
+                          Each entry is a pair of strings, the first being the
+                          connection's sink, the second being the connection's
+                          source. Valid names include:
+
+                          Audio pins on the SoC:
+                          "HP"
+                          "LINEIN"
+                          "LINEOUT"
+                          "MIC1"
+                          "MIC2"
+                          "MIC3"
+
+                          Microphone biases from the SoC:
+                          "HBIAS"
+                          "MBIAS"
+
+                          Board connectors:
+                          "Headphone"
+                          "Headset Mic"
+                          "Line In"
+                          "Line Out"
+                          "Mic"
+                          "Speaker"
+
 Example:
 codec: codec@01c22c00 {
        #sound-dai-cells = <0>;
@@ -29,4 +55,13 @@ codec: codec@01c22c00 {
        clock-names = "apb", "codec";
        dmas = <&dma 0 19>, <&dma 0 19>;
        dma-names = "rx", "tx";
+       allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+       allwinner,audio-routing =
+               "Headphone", "HP",
+               "Speaker", "LINEOUT",
+               "LINEIN", "Line In",
+               "MIC1", "MBIAS",
+               "MIC1", "Mic",
+               "MIC2", "HBIAS",
+               "MIC2", "Headset Mic";
 };
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index cd21914fd01f..4c364e6410dd 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -1133,9 +1133,19 @@ static struct snd_soc_card 
*sun4i_codec_create_card(struct device *dev)
        return card;
 };
 
+static const struct snd_soc_dapm_widget sun6i_codec_card_dapm_widgets[] = {
+       SND_SOC_DAPM_HP("Headphone", NULL),
+       SND_SOC_DAPM_LINE("Line In", NULL),
+       SND_SOC_DAPM_LINE("Line Out", NULL),
+       SND_SOC_DAPM_MIC("Headset Mic", NULL),
+       SND_SOC_DAPM_MIC("Mic", NULL),
+       SND_SOC_DAPM_SPK("Speaker", sun4i_codec_spk_event),
+};
+
 static struct snd_soc_card *sun6i_codec_create_card(struct device *dev)
 {
        struct snd_soc_card *card;
+       int ret;
 
        card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL);
        if (!card)
@@ -1145,8 +1155,15 @@ static struct snd_soc_card 
*sun6i_codec_create_card(struct device *dev)
        if (!card->dai_link)
                return NULL;
 
-       card->dev       = dev;
-       card->name      = "sun4i-codec";
+       card->dev               = dev;
+       card->name              = "sun4i-codec";
+       card->dapm_widgets      = sun6i_codec_card_dapm_widgets;
+       card->num_dapm_widgets  = ARRAY_SIZE(sun6i_codec_card_dapm_widgets);
+       card->fully_routed      = true;
+
+       ret = snd_soc_of_parse_audio_routing(card, "allwinner,audio-routing");
+       if (ret)
+               dev_warn(dev, "failed to parse audio-routing: %d\n", ret);
 
        return card;
 };
-- 
2.9.3

Reply via email to