On Tuesday 20 February 2007 04:17, Udo van den Heuvel wrote: > Krzysztof Halasa wrote: > > Udo van den Heuvel <[EMAIL PROTECTED]> writes: > >> At the bottom I added a dmesg output of the kernel after boot. > >> I more or less know that irq 20 for the DVB-S card (saa7146 (1)) is > >> 'working'. I know that irq 16 for saa7146 (0) (DVB-T) is not working for > >> i2c although the card does work perfectly for DVB-T reception (picture, > >> low CPU load, etc) with only reception as the bottleneck. > > > > BTW: Can you check which device # and IRQ does the card get if plugged > > directly into the PCI slot on board (without the riser)? > > DN is 20 I believe (from the tranquilPC doc). > irq I'd have to check. > > > Is it a VIA ITX board? I think I have VIA's riser card somewhere, > > could check what it does. > > Yes, VIA Epia EN12000. > Interesting to check the riser card.
Just be aware that there are two types of PCI riser -- risers that work in any board, and Via Epia-specific risers. The latter requires a BIOS update on some Epias and presumably has some advantages, possible the ones you're looking for. -- Cheers, Alistair. Final year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
