On 05/09/16 11:01, shh....@gmail.com wrote:
> From: Mingkai Hu <mingkai...@nxp.com>
>
> LS1046A is an SoC with 4 ARMv8 A72 cores and most other IP blocks
> are similar to LS1043A which also complies to Freescale Chassis 2.1
> spec.
>
> Created LS1046A SoC DTSI file to be included by board level DTS
> files.
>
> Signed-off-by: Horia Geant? <horia.gea...@nxp.com>
> Signed-off-by: Mihai Bantea <mihai.ban...@nxp.com>
> Signed-off-by: Chenhui Zhao <chenhui.z...@nxp.com>
> Signed-off-by: Gong Qianyu <qianyu.g...@nxp.com>
> Signed-off-by: Minghuan Lian <minghuan.l...@nxp.com>
> Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com>
> Signed-off-by: Mingkai Hu <mingkai...@nxp.com>
> Signed-off-by: Shaohui Xie <shaohui....@nxp.com>
> ---
> Changes in V2:
> 1. addressed Arnd's comments.
> removed memory size property.
> refined devices' names.
> removed PCIe and MSI nodes.
> 2. updated interrupt properties with readable defines.
> 3. removed clock-names property from I2C and watchdog nodes.
> 4. added crypto nodes.
> binding of crypto nodes available at:
> http://patchwork.ozlabs.org/patch/663184/
> 5. added CPU idle-states node.
> 6. added ddr controller node.
>
> arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 511
> +++++++++++++++++++++++++
> 1 file changed, 511 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> new file mode 100644
> index 0000000..9697332
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -0,0 +1,511 @@
> +/*
> + * Device Tree Include file for Freescale Layerscape-1046A family SoC.
> + *
> + * Copyright 2016, Freescale Semiconductor, Inc.
> + *
> + * Mingkai Hu <mingkai...@nxp.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPLv2 or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "fsl,ls1046a";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + crypto = &crypto;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x0>;
> + clocks = <&clockgen 1 0>;
> + next-level-cache = <&l2>;
> + cpu-idle-states = <&CPU_PH20>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x1>;
> + clocks = <&clockgen 1 0>;
> + next-level-cache = <&l2>;
> + cpu-idle-states = <&CPU_PH20>;
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x2>;
> + clocks = <&clockgen 1 0>;
> + next-level-cache = <&l2>;
> + cpu-idle-states = <&CPU_PH20>;
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a72";
> + reg = <0x3>;
> + clocks = <&clockgen 1 0>;
> + next-level-cache = <&l2>;
> + cpu-idle-states = <&CPU_PH20>;
> + };
> +
> + l2: l2-cache {
> + compatible = "cache";
> + };
> + };
> +
> + idle-states {
> + entry-method = "arm,psci";
> +
> + CPU_PH20: cpu-ph20 {
> + compatible = "arm,idle-state";
> + idle-state-name = "PH20";
> + arm,psci-suspend-param = <0x00010000>;
> + entry-latency-us = <1000>;
> + exit-latency-us = <1000>;
> + min-residency-us = <3000>;
> + };
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + };
> +
> + sysclk: sysclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + clock-output-names = "sysclk";
> + };
> +
> + reboot {
> + compatible ="syscon-reboot";
> + regmap = <&dcfg>;
> + offset = <0xb0>;
> + mask = <0x02>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>,
> + <GIC_PPI 14 IRQ_TYPE_EDGE_RISING>,
> + <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>,
> + <GIC_PPI 10 IRQ_TYPE_EDGE_RISING>;
No, this is completely wrong. The timer is always level triggered, and
you're missing the affinity bits that are described the GIC binding.
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
Please add "arm,cortex-a72-pmu".
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpu0>,
> + <&cpu1>,
> + <&cpu2>,
> + <&cpu3>;
> + };
> +
> + gic: interrupt-controller@1400000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x0 0x1410000 0 0x10000>, /* GICD */
> + <0x0 0x1420000 0 0x20000>, /* GICC */
> + <0x0 0x1440000 0 0x20000>, /* GICH */
> + <0x0 0x1460000 0 0x20000>; /* GICV */
> + interrupts = <1 9 0xf08>;
Please choose between expressing the interrupts entirely with numerals
or entirely with symbols. At the moment this is a mix between the two.
> + };
Thanks,
M.
--
Jazz is not dead. It just smells funny...
