On 08/08/2016 09:30 PM, Robert Jarzmik wrote:
> This is to be seen as a regression as the set_crop function is
> removed. This is a temporary situation in the v4l2 porting, and will
> have to be added later.
This is a bit confusing, since in the next patch you say in the commit log:
- the s_crop() call was removed, judged not working
(see what happens soc_camera_s_crop() when get_crop() == NULL)
So the set_crop removal isn't temporary after all? It isn't added back in
this patch series.
Note that I am OK with removing set_crop if it never worked reliably, but
then the commit log of this patch should be updated to reflect that.
Regards,
Hans
>
> Signed-off-by: Robert Jarzmik <robert.jarz...@free.fr>
> ---
> drivers/media/platform/soc_camera/pxa_camera.c | 76
> --------------------------
> 1 file changed, 76 deletions(-)
>
> diff --git a/drivers/media/platform/soc_camera/pxa_camera.c
> b/drivers/media/platform/soc_camera/pxa_camera.c
> index 8a65f126d091..7a810eb32cc0 100644
> --- a/drivers/media/platform/soc_camera/pxa_camera.c
> +++ b/drivers/media/platform/soc_camera/pxa_camera.c
> @@ -1297,81 +1297,6 @@ static int pxa_camera_check_frame(u32 width, u32
> height)
> (width & 0x01);
> }
>
> -static int pxa_camera_set_crop(struct soc_camera_device *icd,
> - const struct v4l2_crop *a)
> -{
> - const struct v4l2_rect *rect = &a->c;
> - struct device *dev = icd->parent;
> - struct soc_camera_host *ici = to_soc_camera_host(dev);
> - struct pxa_camera_dev *pcdev = ici->priv;
> - struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
> - struct soc_camera_sense sense = {
> - .master_clock = pcdev->mclk,
> - .pixel_clock_max = pcdev->ciclk / 4,
> - };
> - struct v4l2_subdev_format fmt = {
> - .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> - };
> - struct v4l2_mbus_framefmt *mf = &fmt.format;
> - struct pxa_cam *cam = icd->host_priv;
> - u32 fourcc = icd->current_fmt->host_fmt->fourcc;
> - int ret;
> -
> - /* If PCLK is used to latch data from the sensor, check sense */
> - if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
> - icd->sense = &sense;
> -
> - ret = sensor_call(pcdev, video, s_crop, a);
> -
> - icd->sense = NULL;
> -
> - if (ret < 0) {
> - dev_warn(pcdev_to_dev(pcdev), "Failed to crop to %ux%u@%u:%u\n",
> - rect->width, rect->height, rect->left, rect->top);
> - return ret;
> - }
> -
> - ret = sensor_call(pcdev, pad, get_fmt, NULL, &fmt);
> - if (ret < 0)
> - return ret;
> -
> - if (pxa_camera_check_frame(mf->width, mf->height)) {
> - /*
> - * Camera cropping produced a frame beyond our capabilities.
> - * FIXME: just extract a subframe, that we can process.
> - */
> - v4l_bound_align_image(&mf->width, 48, 2048, 1,
> - &mf->height, 32, 2048, 0,
> - fourcc == V4L2_PIX_FMT_YUV422P ? 4 : 0);
> - ret = sensor_call(pcdev, pad, set_fmt, NULL, &fmt);
> - if (ret < 0)
> - return ret;
> -
> - if (pxa_camera_check_frame(mf->width, mf->height)) {
> - dev_warn(pcdev_to_dev(pcdev),
> - "Inconsistent state. Use S_FMT to repair\n");
> - return -EINVAL;
> - }
> - }
> -
> - if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {
> - if (sense.pixel_clock > sense.pixel_clock_max) {
> - dev_err(pcdev_to_dev(pcdev),
> - "pixel clock %lu set by the camera too high!",
> - sense.pixel_clock);
> - return -EIO;
> - }
> - recalculate_fifo_timeout(pcdev, sense.pixel_clock);
> - }
> -
> - icd->user_width = mf->width;
> - icd->user_height = mf->height;
> -
> - pxa_camera_setup_cicr(icd, cam->flags, fourcc);
> -
> - return ret;
> -}
> -
> static int pxa_camera_set_fmt(struct soc_camera_device *icd,
> struct v4l2_format *f)
> {
> @@ -1584,7 +1509,6 @@ static struct soc_camera_host_ops
> pxa_soc_camera_host_ops = {
> .remove = pxa_camera_remove_device,
> .clock_start = pxa_camera_clock_start,
> .clock_stop = pxa_camera_clock_stop,
> - .set_crop = pxa_camera_set_crop,
> .get_formats = pxa_camera_get_formats,
> .put_formats = pxa_camera_put_formats,
> .set_fmt = pxa_camera_set_fmt,
>
