You'll need to sign off the patch.
Acked-by: Pavel Machek <pa...@ucw.cz>
Pavel
On Sat 2016-08-13 05:14:38, Sebastian Reichel wrote:
> ---
> arch/arm/boot/dts/omap3-n950-n9.dtsi | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi
> b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> index 927b17fc4ed8..7c0c53e2f679 100644
> --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
> +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> @@ -58,6 +58,13 @@
> pinctrl-0 = <&debug_leds>;
> };
> };
> +
> + /* controlled (enabled/disabled) directly by wl1271 */
> + vctcxo: vctcxo {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <38400000>;
> + };
> };
>
> &omap3_pmx_core {
> @@ -125,6 +132,16 @@
> OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4)
> /* gpio_93 (cmt_apeslpx) */
> >;
> };
> +
> + uart2_pins: pinmux_uart2_pins {
> + pinctrl-single,pins = <
> + OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)
> /* uart2_cts */
> + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)
> /* uart2_rts */
> + OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)
> /* uart2_tx */
> + OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)
> /* uart2_rx */
> + >;
> + };
> +
> };
>
> &omap3_pmx_core2 {
> @@ -435,3 +452,20 @@
> &ssi_port2 {
> status = "disabled";
> };
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2_pins>;
> +
> + bluetooth {
> + compatible = "nokia,ti,wl1271-bluetooth";
> +
> + reset-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; /* 26 */
> + host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
> + bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
> +
> + clocks = <&vctcxo>;
> + clock-names = "sysclk";
> + };
> +
> +};
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
