The default filter configuration was hard to read and included some redundancy. This patch attempts to stream line configuration and improve readability.
No change of functionality is included. Signed-off-by: Mathieu Poirier <[email protected]> --- drivers/hwtracing/coresight/coresight-etm4x.c | 53 ++++++++++++++------------- 1 file changed, 27 insertions(+), 26 deletions(-) diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 9978cf7a5600..e348c18086f5 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -586,39 +586,34 @@ static void etm4_set_default_config(struct etmv4_config *config) static void etm4_set_default_filter(struct etmv4_config *config) { - /* - * TRCVICTLR::SSSTATUS == 1, the start-stop logic is - * in the started state - */ - config->vinst_ctrl |= BIT(9); + u64 start, stop, access_type = 0; /* * Configure address range comparator '0' to encompass all * possible addresses. */ + start = 0x0; + stop = ~0x0; - /* First half of default address comparator: start at address 0 */ - config->addr_val[ETM_DEFAULT_ADDR_COMP] = 0x0; - /* trace instruction addresses */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP] &= ~(BIT(0) | BIT(1)); - /* EXLEVEL_NS, bits[12:15], only trace application and kernel space */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP] |= ETM_EXLEVEL_NS_HYP; - /* EXLEVEL_S, bits[11:8], don't trace anything in secure state */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP] |= (ETM_EXLEVEL_S_APP | - ETM_EXLEVEL_S_OS | - ETM_EXLEVEL_S_HYP); - config->addr_type[ETM_DEFAULT_ADDR_COMP] = ETM_ADDR_TYPE_RANGE; + /* EXLEVEL_NS, bits[12:15], always stay away from hypervisor mode. */ + access_type = ETM_EXLEVEL_NS_HYP; /* - * Second half of default address comparator: go all - * the way to the top. - */ - config->addr_val[ETM_DEFAULT_ADDR_COMP + 1] = ~0x0; - /* trace instruction addresses */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] &= ~(BIT(0) | BIT(1)); - /* Address comparator type must be equal for both halves */ - config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] = - config->addr_acc[ETM_DEFAULT_ADDR_COMP]; + * EXLEVEL_S, bits[11:8], don't trace anything happening + * in secure state. + */ + access_type |= (ETM_EXLEVEL_S_APP | + ETM_EXLEVEL_S_OS | + ETM_EXLEVEL_S_HYP); + + /* First half of default address comparator */ + config->addr_val[ETM_DEFAULT_ADDR_COMP] = start; + config->addr_acc[ETM_DEFAULT_ADDR_COMP] = access_type; + config->addr_type[ETM_DEFAULT_ADDR_COMP] = ETM_ADDR_TYPE_RANGE; + + /* Second half of default address comparator */ + config->addr_val[ETM_DEFAULT_ADDR_COMP + 1] = stop; + config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] = access_type; config->addr_type[ETM_DEFAULT_ADDR_COMP + 1] = ETM_ADDR_TYPE_RANGE; /* @@ -627,7 +622,13 @@ static void etm4_set_default_filter(struct etmv4_config *config) */ config->viiectlr = BIT(0); - /* no start-stop filtering for ViewInst */ + /* + * TRCVICTLR::SSSTATUS == 1, the start-stop logic is + * in the started state + */ + config->vinst_ctrl |= BIT(9); + + /* No start-stop filtering for ViewInst */ config->vissctlr = 0x0; } -- 2.7.4
