On Tue, 7 Nov 2000 11:58:48 -0600
[EMAIL PROTECTED] wrote:
>
>
> Hello.
>
> When attempting to boot Linux kernel v2.2.17 from a Compact Flash (CF) device I
> am getting the errors shown below. This CF device is in a PCMCIA form factor
> and is the Master device on the secondary IDE controller
>
> Before we get to the errors, though, a little background. I can reproduce this
> boot error on 2 different systems, and have seen the same error messages
> (non-booting) on a 3rd system. For both boot systems the CF device is the only
> IDE device and is the Master on the secondary IDE controller (/dev/hdc). For
> the non-booting system the device is in a PCMCIA slot (/dev/hde).
>
> This is what I see at boot time:
>
> ide1 at 0x170-0x177,0x376 on irq 15
> hdc: SanDisk SDCFB-128, 122MB /w1kB Cache, CHS=980/8/32
> Partition check:
> hdc: hdc1 hdc2
> hdc: hdc1 hdc2
> hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } <- see
>/Document/Config.help
> hdc: drive_cmd: error=0x04 { DriveStatusError }
Try to set CONFIG_IDEDISK_MULTI_MODE y.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
