Hello Jorge,

It is not uncommon that interrupt lines are hardwired to each other on
a standard PC-board.
Therefor it is not always feasible to get rid of interrupt sharing.
Especially on-board USB adapters can easily use up to 5 interrupt
lines on a standard main-board. Also, sharing of interrupt lines (by
hardwiring them) between on-board devices and PCI slots is also common
practice.

The PCI specification explicitly states that PCI devices can share
interrupt lines, and that your drivers must be capable of handling
this.

Why is sharing a problem for you?

If you do not have special realtime requirements, it usually should be
no problem...


Remy


2007/2/6, Jorge Almeida <[EMAIL PROTECTED]>:

Hello to all.

I'm running an application that uses several IO boards in a PCI bus.

My main problem is the virtual IRQ sharing between several boards.
I mean for example:
        1 ethernet board IRQ = 169;
        1 ADC card IRQ         = 169;

I want to get ride of this behaviour, and changing the slot position of each
board is not enought, to get something like (for example):
        1 ethernet board IRQ = 169;
        1 ADC card IRQ         = 170;

Where in the kernel i can see the algorithms for the APIC system where the
virtual IRQs are distributed? Or exist already any patch that permits to
solve my problem?

I'm using kernel 2.6.16.27, in a single machine with Intel pentium IV
processor and chipset ICH4.

Thanks for any reply.
Greetings.

--
Jorge Almeida
[EMAIL PROTECTED]
DISCLAIMER: This message may contain confidential information or privileged 
material and is intended only for the individual(s) named. If you are not a 
named addressee and mistakenly received this message you should not copy or 
otherwise disseminate it: please delete this e-mail from your system and notify 
the sender immediately. E-mail transmissions are not guaranteed to be secure or 
without errors as information could be intercepted, corrupted, lost, destroyed, 
arrive late or incomplete or contain viruses. Therefore, the sender does not 
accept liability for any errors or omissions in the contents of this message 
that arise as a result of e-mail transmissions. Please request a hard copy 
version if verification is required. Critical Software, SA.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to