On Mon, 27 Jun 2016, Stefan Agner wrote: > Use the PMIC's repower capability for reboots. Register a restart > handler and use a slightly elevated priority of 192 since the PMIC > has suprior reset capability (causing a system wide reset). > > Signed-off-by: Stefan Agner <[email protected]> > Reviewed-by: Marcel Ziswiler <[email protected]> > --- > drivers/mfd/rn5t618.c | 43 +++++++++++++++++++++++++++++++++++++------ > 1 file changed, 37 insertions(+), 6 deletions(-) > > diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c > index 1831740..b3ca6df 100644 > --- a/drivers/mfd/rn5t618.c > +++ b/drivers/mfd/rn5t618.c > @@ -12,11 +12,13 @@ > * along with this program. If not, see <http://www.gnu.org/licenses/>. > */ > > +#include <linux/delay.h> > #include <linux/i2c.h> > #include <linux/mfd/core.h> > #include <linux/mfd/rn5t618.h> > #include <linux/module.h> > #include <linux/of_device.h> > +#include <linux/reboot.h> > #include <linux/regmap.h> > > static const struct mfd_cell rn5t618_cells[] = { > @@ -50,17 +52,38 @@ static const struct regmap_config rn5t618_regmap_config = > { > }; > > static struct rn5t618 *rn5t618_pm_power_off; > +static struct notifier_block rn5t618_restart_handler; > > -static void rn5t618_power_off(void) > +static void rn5t618_trigger_poweroff_sequence(bool repower) > { > /* disable automatic repower-on */ > regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT, > - RN5T618_REPCNT_REPWRON, 0); > + RN5T618_REPCNT_REPWRON, > + repower ? RN5T618_REPCNT_REPWRON : 0); > /* start power-off sequence */ > regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT, > RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF); > } > > +static void rn5t618_power_off(void) > +{ > + rn5t618_trigger_poweroff_sequence(false); > +} > + > +static int rn5t618_restart(struct notifier_block *this, > + unsigned long mode, void *cmd) > +{ > + rn5t618_trigger_poweroff_sequence(true); > + > + /* > + * Repower factor detection on PMIC side is not instant. 1ms > + * proved to be enouth time until reset takes effect.
Spell check. Please fix this, add all the Acks you received and resubmit the set. Acked-by: Lee Jones <[email protected]> > + */ > + mdelay(1); > + > + return NOTIFY_DONE; > +} > + > static const struct of_device_id rn5t618_of_match[] = { > { .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 }, > { .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 }, > @@ -102,13 +125,21 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c, > return ret; > } > > + rn5t618_pm_power_off = priv; > if (of_device_is_system_power_controller(i2c->dev.of_node)) { > - if (!pm_power_off) { > - rn5t618_pm_power_off = priv; > + if (!pm_power_off) > pm_power_off = rn5t618_power_off; > - } else { > + else > dev_warn(&i2c->dev, "Poweroff callback already > assigned\n"); > - } > + } > + > + rn5t618_restart_handler.notifier_call = rn5t618_restart; > + rn5t618_restart_handler.priority = 192; > + > + ret = register_restart_handler(&rn5t618_restart_handler); > + if (ret) { > + dev_err(&i2c->dev, "cannot register restart handler, %d\n", > ret); > + return ret; > } > > return 0; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
