On Sun, Jun 26, 2016 at 12:28:22AM -0700, Stephen Boyd wrote:
> We're currently emulating the vbus and id interrupts in the OTGSC
> read API, but we also need to make sure that if we're handling
> the events with extcon that we don't enable the interrupts for
> those events in the hardware. Therefore, properly emulate this
> register if we're using extcon, but don't enable the interrupts.
> This allows me to get my cable connect/disconnect working
> properly without getting spurious interrupts on my device that
> uses an extcon for these two events.
>
> Cc: Peter Chen <peter.c...@nxp.com>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> Cc: "Ivan T. Ivanov" <iivanov...@gmail.com>
> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID
> detect")
> Signed-off-by: Stephen Boyd <stephen.b...@linaro.org>
> ---
> drivers/usb/chipidea/otg.c | 46
> +++++++++++++++++++++++++++++++++++++++-----
> include/linux/usb/chipidea.h | 2 ++
> 2 files changed, 43 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
> index 763a8332b009..b6a88bea4cac 100644
> --- a/drivers/usb/chipidea/otg.c
> +++ b/drivers/usb/chipidea/otg.c
> @@ -44,12 +44,15 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
> else
> val &= ~OTGSC_BSVIS;
>
> - cable->changed = false;
> -
> if (cable->state)
> val |= OTGSC_BSV;
> else
> val &= ~OTGSC_BSV;
> +
> + if (cable->enabled)
> + val |= OTGSC_BSVIE;
> + else
> + val &= ~OTGSC_BSVIE;
> }
>
> cable = &ci->platdata->id_extcon;
> @@ -59,15 +62,18 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
> else
> val &= ~OTGSC_IDIS;
>
> - cable->changed = false;
> -
> if (cable->state)
> val |= OTGSC_ID;
> else
> val &= ~OTGSC_ID;
> +
> + if (cable->enabled)
> + val |= OTGSC_IDIE;
> + else
> + val &= ~OTGSC_IDIE;
> }
>
> - return val;
> + return val & mask;
> }
>
> /**
> @@ -77,6 +83,36 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
> */
> void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
> {
> + struct ci_hdrc_cable *cable;
> +
> + cable = &ci->platdata->vbus_extcon;
> + if (!IS_ERR(cable->edev)) {
> + if (data & mask & OTGSC_BSVIS)
> + cable->changed = false;
> +
> + /* Don't enable vbus interrupt if using external notifier */
> + if (data & mask & OTGSC_BSVIE) {
> + cable->enabled = true;
> + data &= ~OTGSC_BSVIE;
> + } else if (mask & OTGSC_BSVIE) {
> + cable->enabled = false;
> + }
> + }
> +
> + cable = &ci->platdata->id_extcon;
> + if (!IS_ERR(cable->edev)) {
> + if (data & mask & OTGSC_IDIS)
> + cable->changed = false;
> +
> + /* Don't enable id interrupt if using external notifier */
> + if (data & mask & OTGSC_IDIE) {
> + cable->enabled = true;
> + data &= ~OTGSC_IDIE;
> + } else if (mask & OTGSC_IDIE) {
> + cable->enabled = false;
> + }
> + }
> +
> hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data);
> }
>
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index 5dd75fa47dd8..f9be467d6695 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -14,6 +14,7 @@ struct ci_hdrc;
> * struct ci_hdrc_cable - structure for external connector cable state
> tracking
> * @state: current state of the line
> * @changed: set to true when extcon event happen
> + * @enabled: set to true if we've enabled the vbus or id interrupt
> * @edev: device which generate events
> * @ci: driver state of the chipidea device
> * @nb: hold event notification callback
> @@ -22,6 +23,7 @@ struct ci_hdrc;
> struct ci_hdrc_cable {
> bool state;
> bool changed;
> + bool enabled;
> struct extcon_dev *edev;
> struct ci_hdrc *ci;
> struct notifier_block nb;
> --
Acked-by: Peter Chen <peter.c...@nxp.com>
--
Best Regards,
Peter Chen
