The compiler complains about variables that are set, but never used: * intX variables in exar_handle_irq drivers/tty/serial/8250/8250_port.c:1864:34: warning: variable ‘int3’ set but not used [-Wunused-but-set-variable] * val variable in pci_quatech_wqopr drivers/tty/serial/8250/8250_pci.c:1139:10: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
And about a shadow variable: * tmout in wait_for_xmitr is defined twice with the same type. Both of them are also initialized before use. Remove all of them. Signed-off-by: Jiri Slaby <[email protected]> Cc: Matt Schulte <[email protected]> --- drivers/tty/serial/8250/8250_pci.c | 4 ++-- drivers/tty/serial/8250/8250_port.c | 11 ++++------- 2 files changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 8dd250fbd367..3d6287a8981e 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1136,11 +1136,11 @@ static int pci_quatech_rqopr(struct uart_8250_port *port) static void pci_quatech_wqopr(struct uart_8250_port *port, u8 qopr) { unsigned long base = port->port.iobase; - u8 LCR, val; + u8 LCR; LCR = inb(base + UART_LCR); outb(0xBF, base + UART_LCR); - val = inb(base + UART_SCR); + inb(base + UART_SCR); outb(qopr, base + UART_SCR); outb(LCR, base + UART_LCR); } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index b10d05f2004b..c8d8d245350b 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1861,7 +1861,6 @@ static int serial8250_default_handle_irq(struct uart_port *port) */ static int exar_handle_irq(struct uart_port *port) { - unsigned char int0, int1, int2, int3; unsigned int iir = serial_port_in(port, UART_IIR); int ret; @@ -1869,10 +1868,10 @@ static int exar_handle_irq(struct uart_port *port) if ((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X)) { - int0 = serial_port_in(port, 0x80); - int1 = serial_port_in(port, 0x81); - int2 = serial_port_in(port, 0x82); - int3 = serial_port_in(port, 0x83); + serial_port_in(port, 0x80); + serial_port_in(port, 0x81); + serial_port_in(port, 0x82); + serial_port_in(port, 0x83); } return ret; @@ -1994,8 +1993,6 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits) /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { - unsigned int tmout; - for (tmout = 1000000; tmout; tmout--) { unsigned int msr = serial_in(up, UART_MSR); up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; -- 2.9.0
