On 2/1/07, TJ <[EMAIL PROTECTED]> wrote:
---- short extract ---
DC202XX: Primary channel reset.
ide2: reset: success
hde: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hde: task_in_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: unknown
end_request: I/O error, dev hde, sector 238276076
printk: 8 messages suppressed.
Buffer I/O error on device hde2, logical block 47279294
hde: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
hde: task_in_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: unknown
hde: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
Error }
...
The Model number is Maxtor 6Y060L0.
In the log you posted, the drive posted 51/04 to your out-of-bounds
request, but these are 59/04, do they span the end of the device or
something?
I'd be surprised if the drive clunked because of an out of range
command, that model of drive used a very mature interface firmware
with many generations of testing and qualification.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
